Spatial Light Modulators for the Manipulation of Individual Atoms

We propose a novel dipole trapping scheme using spatial light modulators (SLM) for the manipulation of individual atoms. The scheme uses a high numerical aperture microscope to map the intensity distribution of a SLM onto a cloud of cold atoms. The regions of high intensity act as optical dipole force traps. With a SLM fast enough to modify the trapping potential in real time, this technique is well suited for the controlled addressing and manipulation of arbitrarily selected atoms.Comment: 9 pages, 5 figure

Variability of the pullout strength of cancellous bone screws with cement augmentation

Background Orthopaedic surgeons often face clinical situations where improved screw holding power in cancellous bone is needed. Injectable calcium phosphate cements are one option to enhance fixation. Methods Paired screw pullout tests were undertaken in which human cadaver bone was augmented with calcium phosphate cement. A finite element model was used to investigate sensitivity to screw positional placement. Findings Statistical analysis of the data concluded that the pullout strength was generally increased by cement augmentation in the in vitro human cadaver tests. However, when comparing the individual paired samples there were surprising results with lower strength than anticipated after augmentation, in apparent contradiction to the generally expected conclusion. Investigation using the finite element model showed that these strength reductions could be accounted for by small screw positional changes. A change of 0.5 mm might result in predicted pullout force changes of up to 28%. Interpretation Small changes in screw position might lead to significant changes in pullout strength sufficient to explain the lower than expected individual pullout values in augmented cancellous bone. Consequently whilst the addition of cement at a position of low strength would increase the pullout strength at that point, it might not reach the pullout strength of the un-augmented paired test site. However, the overall effect of cement augmentation produces a significant improvement at whatever point in the bone the screw is placed. The use of polymeric bone-substitute materials for tests may not reveal the natural variation encountered in tests using real bone structures.Dr V. Stadelmann (AOR, Davos, Switzerland) and Mr. M. Behrens (Stryker, Selzach, Switzerland). Professor Procter and Dr Arnoldi were employed by Stryker Trauma. Dr Bennani's PhD studies at Brunel University were funded by Stryker Trauma AG

Urbanisation affects ecosystem functioning more than structure in tropical streams

Urbanisation poses a clear threat to tropical freshwater streams, yet fundamental knowledge gaps hinder our ability to effectively conserve stream biodiversity and preserve ecosystem functioning. Here, we studied the impact of urbanisation on structural and functional ecosystem responses in low-order streams in Singapore, a tropical city with a mosaic landscape of protected natural forests, managed buffer zones (between forest and open-country habitats), and built-up urban areas. We quantified an urbanisation gradient based on landscape, in-stream, and riparian conditions, and found an association between urbanisation and pollution-tolerant macroinvertebrates (e.g. freshwater snail and worm species) in litter bags. We also found greater macroinvertebrate abundance (mean individuals bag−1; forest: 30.3, buffer: 70.1, urban: 109.0) and richness (mean taxa bag−1; forest: 4.53, buffer: 4.75, urban: 7.50) in urban streams, but similar diversity across habitats. Higher levels of primary productivity (measured from algal accrual on ceramic tiles) and microbial decomposition (measured from litter-mass loss in mesh bags) at urban sites indicate rapid microbial activity at higher light, temperature, and nutrient levels. We found that urbanisation affected function 32% more than structure in the studied tropical streams, likely driven by greater algal growth in urban streams. These changes in ecological processes (i.e. ecosystem functioning) possibly lead to a loss of ecosystem services, which would negatively affect ecology, society, and economy. Our results point to possible management strategies (e.g. increasing vegetation density through buffer park creation) to reduce the impacts of urbanisation, restore vital ecosystem functions in tropical streams, and create habitat niches for native species

From cassava to gari: Mapping of quality characteristics and end-user preferences in Cameroon and Nigeria

User's preferences of cassava and cassava products along the value chain are supported by specific root quality characteristics that can be linked to root traits. Therefore, providing an evidence base of user preferred characteristics along the value chain, can help in the functional choice of cassava varieties. In this respect, the present paper presents the results from focus group discussions and individual interviews on user preferred quality characteristics of raw cassava roots and the derived product, gari, ‐ one of the major cassava products in Sub Saharan Africa ‐ in major production and consumption areas of Cameroon and Nigeria. Choice of cassava varieties for farming is mainly determined by the multiple end‐uses of the roots, their agricultural yield and the processing determinants of roots that support their major high‐quality characteristics: size, density, low water content, maturity, colour and safety. Processing of cassava roots into gari goes through different technological variants leading to a gari whose high‐quality characteristics are: dryness, colour, shiny/attractive appearance, uniform granules and taste. Eba, the major consumption form of gari in Cameroon and Nigeria is mainly characterized by its textural properties: smoothness, firmness, stickiness, elasticity, mouldability. Recommendations are made, suggesting that breeding will have to start evaluating cassava clones for brightness/shininess, as well as textural properties such as mouldability and elasticity of cassava food products, for the purpose of supporting decision‐making by breeders and the development of high‐throughput selection methods of cassava varieties. Women are identified as important beneficiaries of such initiatives giving their disadvantaged position and their prominent role in cassava processing and marketing of gari

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

A search for resonances decaying into a Higgs boson and a new particle X in the XH → qqbb final state with the ATLAS detector

A search for heavy resonances decaying into a Higgs boson (H) and a new particle (X) is reported, utilizing 36.1 fb−1 of proton–proton collision data at collected during 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. The particle X is assumed to decay to a pair of light quarks, and the fully hadronic final state is analysed. The search considers the regime of high XH resonance masses, where the X and H bosons are both highly Lorentz-boosted and are each reconstructed using a single jet with large radius parameter. A two-dimensional phase space of XH mass versus X mass is scanned for evidence of a signal, over a range of XH resonance mass values between 1 TeV and 4 TeV, and for X particles with masses from 50 GeV to 1000 GeV. All search results are consistent with the expectations for the background due to Standard Model processes, and 95% CL upper limits are set, as a function of XH and X masses, on the production cross-section of the resonance

Search for flavour-changing neutral currents in processes with one top quark and a photon using 81 fb⁻¹ of pp collisions at \sqrts = 13 TeV with the ATLAS experiment

A search for flavour-changing neutral current (FCNC) events via the coupling of a top quark, a photon, and an up or charm quark is presented using 81 fb−1 of proton–proton collision data taken at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Events with a photon, an electron or muon, a b-tagged jet, and missing transverse momentum are selected. A neural network based on kinematic variables differentiates between events from signal and background processes. The data are consistent with the background-only hypothesis, and limits are set on the strength of the tqγ coupling in an effective field theory. These are also interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tuγ coupling of 36 fb (78 fb) and on the branching ratio for t→γu of 2.8×10−5 (6.1×10−5). In addition, they are interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tcγ coupling of 40 fb (33 fb) and on the branching ratio for t→γc of 22×10−5 (18×10−5). © 2019 The Author(s

Combination of searches for Higgs boson pairs in pp collisions at \sqrts = 13 TeV with the ATLAS detector

This letter presents a combination of searches for Higgs boson pair production using up to 36.1 fb(-1) of proton-proton collision data at a centre-of-mass energy root s = 13 TeV recorded with the ATLAS detector at the LHC. The combination is performed using six analyses searching for Higgs boson pairs decaying into the b (b) over barb (b) over bar, b (b) over barW(+)W(-), b (b) over bar tau(+)tau(-), W+W-W+W-, b (b) over bar gamma gamma and W+W-gamma gamma final states. Results are presented for non-resonant and resonant Higgs boson pair production modes. No statistically significant excess in data above the Standard Model predictions is found. The combined observed (expected) limit at 95% confidence level on the non-resonant Higgs boson pair production cross-section is 6.9 (10) times the predicted Standard Model cross-section. Limits are also set on the ratio (kappa(lambda)) of the Higgs boson self-coupling to its Standard Model value. This ratio is constrained at 95% confidence level in observation (expectation) to -5.0 &lt; kappa(lambda) &lt; 12.0 (-5.8 &lt; kappa(lambda) &lt; 12.0). In addition, limits are set on the production of narrow scalar resonances and spin-2 Kaluza-Klein Randall-Sundrum gravitons. Exclusion regions are also provided in the parameter space of the habemus Minimal Supersymmetric Standard Model and the Electroweak Singlet Model. For complete list of authors see http://dx.doi.org/10.1016/j.physletb.2019.135103</p

Searches for lepton-flavour-violating decays of the Higgs boson in s=13\sqrt{s}=13 TeV pp\mathit{pp} collisions with the ATLAS detector

This Letter presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ , performed with the ATLAS detector at the LHC. The searches are based on a data sample of proton–proton collisions at a centre-of-mass energy √s = 13 TeV, corresponding to an integrated luminosity of 36.1 fb−1. No significant excess is observed above the expected background from Standard Model processes. The observed (median expected) 95% confidence-level upper limits on the leptonflavour-violating branching ratios are 0.47% (0.34+0.13−0.10%) and 0.28% (0.37+0.14−0.10%) for H → eτ and H → μτ , respectively.publishedVersio