Enzymatic synthesis of Tinuvin

Coupling of 3-(3-tert-butyl-4-hydroxyphenyl) propionic acid methylester to 1H-benzotriazole using a laccase from Trametes hirsuta was studied. The potentially resulting coupling product Tinuvin 1130 is an important UV-absorber used in polymer based materials. Oxidation of the phenol by the laccase led to homomolecular coupling reactions while the laccase did not attack 1H-benzotriazole. Due to the homomolecular reaction of the phenol in the presence of laccase coupling of phenol and 1H-benzotriazole was only observed when 1H-benzotriazole was applied in four-fold molar excess. The reaction was monitored by UV/vis spectroscopy, TLC and MS (ion trap) analysis. Coupling of 1H-benzotriazole took place in ortho position according to the postulated mechanism

Hydroxylation of polypropylene using the monooxygenase mutant 139-3 from Bacillus megaterium BM3

Enzymatic hydroxylation of polypropylene (PP) was investigated in order to increase hydrophilicity. A mutant (139-3) of the P450monooxygenase from Bacillus megaterium expressed in E. coli DH5α was purified using anion exchange chromatography. Hydroxylation of PP fabrics led to a dramatic increase of hydrophilicity as indicated by a water drop dissipation time of below 1 s compared to the hydrophobic reference material. Likewise, a 4.9 cm increase of rising height was measured which remained consistent after 144 h of storage. Similarly, enzymatic hydroxylation of PP films lead to a decrease of the WCA from 104.6° to 77.3° with no major change after exposure to air for 6 days. Using X-ray photoelectron spectroscopy, an increase in normalized atomic concentrations of oxygen from 1.40 to 4.98% for the CO-inhibited and enzyme treated sample, respectively, was measured confirming enzymatic hydroxylation.This study was performed within Austrian Centre of Industrial Biotechnology ACIB, the MacroFun project and COST Action 868. This work has been supported by the Federal Ministry of Economy, Family and Youth (BMWFJ), the Federal Ministry of Traffic, Innovation and Technology (bmvit), the Styrian Business Promotion Agency SFG, the Standortagentur Tirol and ZIT - Technology Agency of the City of Vienna through the COMET- Funding Program managed by the Austrian Research Promotion Agency FFG

Protein disulphide isomerase-assisted functionalization of keratin-based matrices

In living systems, protein disulphide isomerase (PDI, EC 5.3.4.1) regulates the formation of new disulphide bonds in proteins (oxidase activity) and catalyzes the rearrangement of non-native disulphide bonds (isomerase activity), leading proteins towards their native configuration. In this study, PDI was used to attach cysteine-containing compounds (CCCs) onto hair, to enhance compound migration within hair fibre and to trigger protein release. A fluorescent (5(6)-TAMRA)-labelled keratin peptide was incorporated into hair by using PDI. Similarly, PDI promoted the grafting of a cysteine-functionalized dye onto wool, as suggested by matrix-assisted laser desorption and ionization time-of-flight results. These reactions were thought to involve oxidation of disulphide bonds between CCCs and wool or hair cysteine residues, catalyzed by the oxidized PDI active site. On the other hand, PDI was demonstrated to enhance the migration of a disulphide bondfunctionalized dye within the keratin matrix and trigger the release of RNase A from wool fibres’ surface. These observations may indicate that an isomerisation reaction occurred, catalyzed by the reduced PDI active site, to achieve the thiol-disulphide exchange, i.e. the rearrangement of disulphide bonds between CCCs and keratin. The present communication aims to highlight promising biotechnological applications of PDI, derived from its almost unique properties within the isomerase family.We thank to FCT "Fundacao para a Ciencia e Tecnologia" (scholarship SFRH/BD/38363/2007) for providing Margarida Fernandes the grant for PhD studies

The Mu3e Data Acquisition

The Mu3e experiment aims to find or exclude the lepton flavor violating decay μ+→e+e−e+ with a sensitivity of one in 10 16 muon decays. The first phase of the experiment is currently under construction at the Paul Scherrer Institute (PSI, Switzerland), where beams with up to 10 8 muons per second are available. The detector will consist of an ultra-thin pixel tracker made from High-Voltage Monolithic Active Pixel Sensors (HV-MAPS) , complemented by scintillating tiles and fibers for precise timing measurements. The experiment produces about 100Gbit/s of zero-suppressed data, which are transported to a filter farm using a network of field programmable gate arrays (FPGAs) and fast optical links. On the filter farm, tracks and three-particle vertices are reconstructed using highly parallel algorithms running on graphics processing units, leading to a reduction of the data to 100 Mbyte/s for mass storage and offline analysis. This article introduces the system design and hardware implementation of the Mu3e data acquisition and filter farm

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurement of the production of a W boson in association with a charm quark in pp collisions at √s = 7 TeV with the ATLAS detector

The production of a W boson in association with a single charm quark is studied using 4.6 fb−1 of pp collision data at s√ = 7 TeV collected with the ATLAS detector at the Large Hadron Collider. In events in which a W boson decays to an electron or muon, the charm quark is tagged either by its semileptonic decay to a muon or by the presence of a charmed meson. The integrated and differential cross sections as a function of the pseudorapidity of the lepton from the W-boson decay are measured. Results are compared to the predictions of next-to-leading-order QCD calculations obtained from various parton distribution function parameterisations. The ratio of the strange-to-down sea-quark distributions is determined to be 0.96+0.26−0.30 at Q 2 = 1.9 GeV2, which supports the hypothesis of an SU(3)-symmetric composition of the light-quark sea. Additionally, the cross-section ratio σ(W + +c¯¯)/σ(W − + c) is compared to the predictions obtained using parton distribution function parameterisations with different assumptions about the s−s¯¯¯ quark asymmetry

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30