The Large Sky Area Multi-object Fiber Spectroscopic Telescope (LAMOST) Quasar Survey: Quasar Properties from Data Release Six to Nine

We report the fourth installment in the series of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) Quasar Survey, which includes quasars observed between September, 2017 and June, 2021. There are in total 13,066 quasars reliably identified, of which 6,685 are newly discovered that are not reported in the SDSS DR14 quasar catalog or Million Quasars catalog. Because LAMOST does not provide accurate absolute flux calibration, we re-calibrate the spectra with the SDSS/Pan-STARRS1 multi-band photometric data. The emission line properties of H$\alpha$, H$\beta$, Mg\,{\sc ii} and C\,{\sc iv}, and the continuum luminosities are measured by fitting the re-calibrated spectra. We also estimate the single-epoch virial black hole masses ($\rm M_{BH}$) using the derived emission line and continuum parameters. This is the first time that the emission line and continuum fluxes were estimated based on LAMOST re-calibrated quasar spectra. The catalog and spectra for these quasars are available online. After the nine-year LAMOST quasar survey, there are in total 56,175 identified quasars, of which 24,127 are newly discovered. The LAMOST quasar survey not only discovers a great number of new quasars, but also provides a database for investigating the spectral variability of the quasars observed by both LAMOST and SDSS, and finding rare quasars including changing-look quasars and broad absorption line quasars.Comment: arXiv admin note: text overlap with arXiv:1811.01570, Accepted by ApJ

Improving sentiment analysis via sentence type classification using BiLSTM-CRF and CNN

Different types of sentences express sentiment in very different ways. Traditional sentence-level sentiment classification research focuses on one-technique-fits-all solution or only centers on one special type of sentences. In this paper, we propose a divide-and-conquer approach which first classifies sentences into different types, then performs sentiment analysis separately on sentences from each type. Specifically, we find that sentences tend to be more complex if they contain more sentiment targets. Thus, we propose to first apply a neural network based sequence model to classify opinionated sentences into three types according to the number of targets appeared in a sentence. Each group of sentences is then fed into a one-dimensional convolutional neural network separately for sentiment classification. Our approach has been evaluated on four sentiment classification datasets and compared with a wide range of baselines. Experimental results show that: (1) sentence type classification can improve the performance of sentence-level sentiment analysis; (2) the proposed approach achieves state-of-the-art results on several benchmarking datasets

Azide and sulfonylazide functionalized fluorophores for the selective and sensitive detection of hydrogen sulfide

[EN] Three fluorescent probes (1–3) for the selective and sensitive detection of hydrogen sulfide have been synthesized and characterized. Probe 1 is a coumarin derivative functionalized with an azide moiety whereas 2 contain the azide reactive group into a naphthalene fluorophore backbone. Probe 3 is composed also by a naphthalene fluorophore but, in this case, functionalized with a sulfonylazide reactive moiety. Probes 1 and 3 are non-fluorescent whereas 2 is weakly emissive in HEPES (10 mM, pH 7.4)–DMSO 99:1 (v/v). The emission behavior of the three probes was tested against selected anions, bio-thiols and oxidant molecules. Of all the chemical species tested, only HS− is able to induce an enhancement in the emission intensity (50, 11 and 20-fold for 1, 2 and 3, respectively). The observed emission in the presence of hydrogen sulfide is ascribed, in the case of probes 1 and 2, to an azide–amine reduction induced by HS− anion, whereas for probe 3 the sensing mechanism is related with a sulfonylazide–sulfonamide conversion. The three probes are very sensitive to HS− anion with limits of detection of 0.17, 0.20 and 0.40 mM for 1, 2 and 3 respectively. Cell viability studies demonstrated that 1–3 probes are essentially non-toxic at concentrations 10–50 μM and are well suited for in vivo studies. Finally, probe 1 was used for the detection on intracellular HS− anion in HeLa cells by means of confocal microscopy.Financial support from the Spanish Government (Project MAT2012-38429-004-01) and the Generalitat Valenciana (Project PROMETEO/2009/016) is gratefully acknowledged. S.E. is grateful to the Generalitat Valenciana for his Santiago Grisolia fellow. C.T. also thanks the Ministerio de Ciencia e Innovacion for her FPU grant. L.E.S.F. thanks the Carolina Foundation and UPNFM-Honduras for his doctoral grant.El Sayed Shehata Nasr, S.; De La Torre Paredes, C.; Santos Figueroa, LE.; Marín Hernández, C.; Martínez Mañez, R.; Sancenón Galarza, F.; Costero Nieto, AM.... (2015). Azide and sulfonylazide functionalized fluorophores for the selective and sensitive detection of hydrogen sulfide. Sensors and Actuators B: Chemical. 207(B):987-994. https://doi.org/10.1016/j.snb.2014.04.047S987994207

A review on the heat and mass transfer phenomena in nanofluid coolants with special focus on automotive applications

Engineered suspensions of nanosized particles (nanofluids) are characterized by superior thermal properties. Due to the increasing need for ultrahigh performance cooling in many industries, nanofluids have been widely investigated as next-generation coolants. However, the multiscale nature of nanofluids implies nontrivial relations between their design characteristics and the resulting thermo-physical properties, which are far from being fully understood. This pronounced sensitivity is the main reason for some contradictory results among both experimental evidence and theoretical considerations presented in the literature. In this Review, the role of fundamental heat and mass transfer mechanisms governing thermo-physical properties of nanofluids is assessed, from both experimental and theoretical point of view. Starting from the characteristic nanoscale transport phenomena occurring at the particle-fluid interface, a comprehensive review of the influence of geometrical (particle shape, size and volume concentration), physical (temperature) and chemical (particle material, pH and surfactant concentration in the base fluid) parameters on the nanofluid properties was carried out. Particular focus was devoted to highlight the advantages of using nanofluids as coolants for automotive heat exchangers, and a number of design guidelines was suggested for balancing thermal conductivity and viscosity enhancement in nanofluids. This Review may contribute to a more rational design of the thermo-physical properties of particle suspensions, therefore easing the translation of nanofluid technology from small-scale research laboratories to large-scale industrial applications

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Mapping child growth failure across low- and middle-income countries

Child growth failure (CGF), manifested as stunting, wasting, and underweight, is associated with high 5 mortality and increased risks of cognitive, physical, and metabolic impairments. Children in low- and middle-income countries (LMICs) face the highest levels of CGF globally. Here we illustrate national and subnational variation of under-5 CGF indicators across LMICs, providing 2000–2017 annual estimates mapped at a high spatial resolution and aggregated to policy-relevant administrative units and national levels. Despite remarkable declines over the study period, many LMICs remain far from the World Health 10 Organization’s ambitious Global Nutrition Targets to reduce stunting by 40% and wasting to less than 5% by 2025. Large disparities in prevalence and rates of progress exist across regions, countries, and within countries; our maps identify areas where high prevalence persists even within nations otherwise succeeding in reducing overall CGF prevalence. By highlighting where subnational disparities exist and the highest-need populations reside, these geospatial estimates can support policy-makers in planning locally 15 tailored interventions and efficient directing of resources to accelerate progress in reducing CGF and its health implications

Burden of injury along the development spectrum : associations between the Socio-demographic Index and disability-adjusted life year estimates from the Global Burden of Disease Study 2017

Background The epidemiological transition of non-communicable diseases replacing infectious diseases as the main contributors to disease burden has been well documented in global health literature. Less focus, however, has been given to the relationship between sociodemographic changes and injury. The aim of this study was to examine the association between disability-adjusted life years (DALYs) from injury for 195 countries and territories at different levels along the development spectrum between 1990 and 2017 based on the Global Burden of Disease (GBD) 2017 estimates. Methods Injury mortality was estimated using the GBD mortality database, corrections for garbage coding and CODEm-the cause of death ensemble modelling tool. Morbidity estimation was based on surveys and inpatient and outpatient data sets for 30 cause-of-injury with 47 nature-of-injury categories each. The Socio-demographic Index (SDI) is a composite indicator that includes lagged income per capita, average educational attainment over age 15 years and total fertility rate. Results For many causes of injury, age-standardised DALY rates declined with increasing SDI, although road injury, interpersonal violence and self-harm did not follow this pattern. Particularly for self-harm opposing patterns were observed in regions with similar SDI levels. For road injuries, this effect was less pronounced. Conclusions The overall global pattern is that of declining injury burden with increasing SDI. However, not all injuries follow this pattern, which suggests multiple underlying mechanisms influencing injury DALYs. There is a need for a detailed understanding of these patterns to help to inform national and global efforts to address injury-related health outcomes across the development spectrum.Peer reviewe

Mapping 123 million neonatal, infant and child deaths between 2000 and 2017

Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations