Transcatheter heart valve selection and permanent pacemaker implantation in patients with pre-existent right bundle branch block

Background-Right bundle branch block is an established predictor for new conduction disturbances and need for a permanent pacemaker (PPM) after transcatheter aortic valve replacement. The aim of the study was to evaluate the absolute rates of transcatheter aortic valve replacement related PPM implantations in patients with pre-existent right bundle branch block and categorize for different transcatheter heart valves. Methods and Results-We pooled data on 306 transcatheter aortic valve replacement patients from 4 high-volume centers in Europe and selected those with right bundle branch block at baseline without a previously implanted PPM. Logistic regression was used to evaluate whether PPM rate differed among transcatheter heart valves after adjustment for confounders. Mean age was 83±7 years and 63% were male. Median Society of Thoracic Surgeons score was 6.3 (interquartile range, 4.1-10.2). The following transcatheter valve designs were used: Medtronic CoreValve (n=130; Medtronic, Minneapolis, MN); Edwards Sapien XT (ES-XT; n=124) and Edwards Sapien 3 (ES-3; n=32; Edwards Lifesciences, Irvine, CA); and Boston Scientific Lotus (n=20; Boston Scientific Corporation, Marlborough, MA). Overall permanent pacemaker implantation rate post-transcatheter aortic valve replacement was 41%, and per valve design: 75% with Lotus, 46% with CoreValve, 32% with ES-XT, and 34% with ES-3. The indication for PPM implantation was total atrioventricular block in 98% of the cases. Lotus was associated with a higher PPM rate than all other valves. PPM rate did not differ between ES-XT and ES-3. Ventricular paced rhythm at 30-day and 1-year follow-up was present in 81% at 89%, respectively. Conclusions-Right bundle branch block at baseline is associated with a high incidence of PPM implantation for all transcatheter heart valves. PPM rate was highest for Lotus and lowest for ES-XT and ES-3. Pacemaker dependency remained high during followup

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Características produtivas, agronômicas e nutricionais do capim-tanzânia em cinco diferentes idades ao corte

Avaliou-se o capim-tanzânia (Panicum maximum cv Tanzânia) cortado aos 42, 63, 84, 107 e 126 dias quanto à produtividade, às características agronômicas, à composição bromatológica e à digestibilidade in vitro. Observou-se aumento na altura da planta do capim-tanzânia até os 84 dias, com aumento da produção de massa verde de forragem e aumento na produção de matéria seca com o avançar da idade ao corte. O aumento da idade ao corte resultou em diminuição do percentual de folhas e em aumento no percentual de hastes. Na composição bromatológica, observaram-se diminuição do teor de proteína bruta e aumento das frações fibrosas, com aumento do nitrogênio retido nessa última com o avançar da idade. Os resultados obtidos refletiram-se na cinética de fermentação ruminal, descrita pela técnica in vitro semiautomática de produção de gases, demonstrando menor potencial de produção de gases, menor taxa fraccional de fermentação e, consequentemente, menor degradabilidade efetiva da matéria seca. Recomenda-se o corte do capim-tanzânia no intervalo de 42 a 63 dias de crescimento.</jats:p

Genetic Diversity Of Pacu And Piapara Broodstocks In Restocking Programs In The Rivers Paraná And Paranapanema (brazil)

The genetic diversity of Piaractus mesopotamicus (pacu) and Leporinus elongatus (piapara) broodstocks used in restocking programs in the rivers Paraná and Paranapanema is analyzed. One hundred and twenty specimens (two broodstocks of each species) from fish ponds in Palotina PR Brazil and in Salto Grande SP Brazil were assessed. Ten primers produced 96 fragments, comprising 68 (70.83%) and 94 (97.92%) polymorphic fragments for P. mesopotamicus and L. elongatus broodstocks, respectively. Differences (p <0.05) in the frequency of 15 and 27 fragments were detected for each species, without exclusive fragments. Shannon Index (0.347-0.572) and the percentage of polymorphic fragments (57.3%-94.8%) revealed high intra-population genetic variability for all broodstocks. Results of molecular variance analyses (AMOVA) showed that most variations do not lie between the broodstocks but within each broodstock (89%). Genetic (0.088 and 0.142) and identity (0.916 and 0.868) distance rates demonstrated similarity between the broodstocks of each species, corroborated by Fst (0.1023 and 010.27) and Nm (4.18 and 4.33) rates, with a slight genetic difference due to genic flux. High intrapopulation genetic variability and similarity between the broodstocks of each species was also detected, proving a common ancestry.3742365237

Mineralogical and geochemical analysis of Fe-phases in drill-cores from the Triassic Stuttgart Formation at Ketzin CO₂ storage site before CO₂ arrival

Reactive iron (Fe) oxides and sheet silicate-bound Fe in reservoir rocks may affect the subsurface storage of CO2 through several processes by changing the capacity to buffer the acidification by CO2 and the permeability of the reservoir rock: (1) the reduction of three-valent Fe in anoxic environments can lead to an increase in pH, (2) under sulphidic conditions, Fe may drive sulphur cycling and lead to the formation of pyrite, and (3) the leaching of Fe from sheet silicates may affect silicate diagenesis. In order to evaluate the importance of Fe-reduction on the CO2 reservoir, we analysed the Fe geochemistry in drill-cores from the Triassic Stuttgart Formation (Schilfsandstein) recovered from the monitoring well at the CO2 test injection site near Ketzin, Germany. The reservoir rock is a porous, poorly to moderately cohesive fluvial sandstone containing up to 2–4 wt% reactive Fe. Based on a sequential extraction, most Fe falls into the dithionite-extractable Fe-fraction and Fe bound to sheet silicates, whereby some Fe in the dithionite-extractable Fe-fraction may have been leached from illite and smectite. Illite and smectite were detected in core samples by X-ray diffraction and confirmed as the main Fe-containing mineral phases by X-ray absorption spectroscopy. Chlorite is also present, but likely does not contribute much to the high amount of Fe in the silicate-bound fraction. The organic carbon content of the reservoir rock is extremely low (<0.3 wt%), thus likely limiting microbial Fe-reduction or sulphate reduction despite relatively high concentrations of reactive Fe-mineral phases in the reservoir rock and sulphate in the reservoir fluid. Both processes could, however, be fuelled by organic matter that is mobilized by the flow of supercritical CO2 or introduced with the drilling fluid. Over long time periods, a potential way of liberating additional reactive Fe could occur through weathering of silicates due to acidification by CO2

Associations of common breast cancer susceptibility alleles with risk of breast cancer subtypes in BRCA1 and BRCA2 mutation carriers

Introduction: More than 70 common alleles are known to be involved in breast cancer (BC) susceptibility, and several exhibit significant heterogeneity in their associations with different BC subtypes. Although there are differences in the association patterns between BRCA1 and BRCA2 mutation carriers and the general population for several loci, no study has comprehensively evaluated the associations of all known BC susceptibility alleles with risk of BC subtypes in BRCA1 and BRCA2 carriers. Methods: We used data from 15,252 BRCA1 and 8,211 BRCA2 carriers to analyze the associations between approximately 200,000 genetic variants on the iCOGS array and risk of BC subtypes defined by estrogen receptor (ER), progesterone receptor (PR), human epidermal growth factor receptor 2 (HER2) and triple-negative- (TN) status; morphologic subtypes; histological grade; and nodal involvement. Results: The estimated BC hazard ratios (HRs) for the 74 known BC alleles in BRCA1 carriers exhibited moderate correlations with the corresponding odds ratios from the general population. However, their associations with ER-positive BC in BRCA1 carriers were more consistent with the ER-positive as

Assessing associations between the AURKAHMMR-TPX2-TUBG1 functional module and breast cancer risk in BRCA1/2 mutation carriers

While interplay between BRCA1 and AURKA-RHAMM-TPX2-TUBG1 regulates mammary epithelial polarization, common genetic variation in HMMR (gene product RHAMM) may be associated with risk of breast cancer in BRCA1 mutation carriers. Following on these observations, we further assessed the link between the AURKA-HMMR-TPX2-TUBG1 functional module and risk of breast cancer in BRCA1 or BRCA2 mutation carriers. Forty-one single nucleotide polymorphisms (SNPs) were genotyped in 15,252 BRCA1 and 8,211 BRCA2 mutation carriers and subsequently analyzed using a retrospective likelihood appr

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

Active Front-End converter applied for the THD reduction in power systems

The Active Front-End (AFE) converter topology is generated by modifying a conventional back-to-back converter, from using a single VSC to use pVCS connected in parallel. The AFE configuration improves the capability, efficiency and reliability of energy conversion devices connected to the power system. In this paper, a novel technique to reduce the total harmonic distortion (THD) in an AFE converter topology is proposed and analyzed. The THD reduction is achieved by applying a phase shift angle in the SPWM switching signals of each AFE converter VSC. To verify the functionality and robustness of the proposed methodology, the power system simulation in Matlab-Simulink is analyzed for a type-4 wind turbine converter with total power output of 9MW. The obtained simulation results show a THD reduction up to 2.5 for AFE connected to the power network

In vitro dry matter and cell wall fractions of three genotypes of sunflower ensiled with additives

Ensilaram-se três genótipos de girassol (M734, Rumbosol 91 e variedade V2000), enriquecidos no material original com: 0,5% de uréia (U); 0,5% de carbonato de cálcio (CC); 0,5% de uréia mais 0,5% de carbonato de cálcio (U+CC); inoculante bacteriano comercial (IB) comercial e sem aditivo que serviu como silagem testemunha (T). Foram utilizados silos de laboratório de PVC, abertos com 1, 3, 5, 7, 14, 28 e 56 dias de ensilados, sendo determinados fibra em detergente neutro (FDN), fibra em detergente ácido (FDA), lignina e digestibilidade in vitro da matéria seca (DIVMS). As silagens de Rumbosol 91 apresentaram valores superiores aos dos genótipos V2000 e M734 nos dias de abertura para FDN, FDA e lignina. Os aditivos não promoveram alterações nos constituintes da parede celular. A silagem T não apresentou diferenças entre os genótipos quanto à DIVMS no decorrer do processo fermentativo, sendo os valores do último dia de abertura (56) de 51,0%, 49,1% e 48,9% de DIVMS para os genótipos M734, V2000 e Rumbosol 91, respectivamente. Não houve diferença entre as silagens com aditivos e a silagem testemunha com a evolução do processo fermentativo quanto à DIVMS. Os aditivos utilizados não melhoraram as silagens de girassol quanto às características avaliadas e, apesar de os genótipos apresentarem digestibilidade in vitro semelhantes, o Rumbosol 91 apresentou maiores teores de constituintes da parede celular.Three sunflower genotypes (M 734, Rumbosol 91 and V2000 variety) enriched with 0.5% of urea (U); 0.5% of calcium carbonate (CC); 0.5% of urea plus 0.5% of calcium carbonate (U + CC); commercial bacterial inoculate (BI); and without any additive, used as control silage (T) were ensiled in PVC silos and opened after 1, 3, 5, 7, 14, 28 and 56 days to determine the neutral detergent fiber (NDF), acid detergent fiber (FDA), lignin and dry matter in vitro digestibility (DMIVD). The Rumbosol 91 genotype silage showed higher NDF, ADF and lignin than V2000 and M734 genotypes. The additives did not promote changes in the cell wall constituents. No statistical differences among silages of the genotypes for DMIVD were observed during the fermentative process. The DMIVD at 56 days were 51.0, 49.1 and 48.9% for silage of M734, V2000 and Rumbosol 91 genotypes, respectively. No difference between silages with additives and control (T), during the fermentative process for DMIVD was observed. The additives did not improve sunflower silages. The genotypes showed similar in vitro digestibility, and the Rumbosol 91 genotype showed high compound of cell wall constituent