1,950 research outputs found
Unification of Radio Galaxies and Their Accretion/Jet Properties
We investigate the relation between black hole mass, M_bh, and jet power,
Q_jet, for a sample of BL Lacs and radio quasars. We find that BL Lacs are
separated from radio quasars by the FR I/II dividing line in M_bh-Q_jet plane,
which strongly supports the unification scheme of FR I/BL Lac and FR II/radio
quasar. The Eddington ratio distribution of BL Lacs and radio quasars exhibits
a bimodal nature with a rough division at L_bol/L_Edd~0.01, which imply that
they may have different accretion modes. We calculate the jet power extracted
from advection dominated accretion flow (ADAF), and find that it require
dimensionless angular momentum of black hole j~0.9-0.99 to reproduce the
dividing line between FR I/II or BL Lac/radio quasar if dimensionless accretion
rate mdot=0.01 is adopted, which is required by above bimodal distribution of
Eddington ratios. Our results suggest that black holes in radio galaxies are
rapidly spinning.Comment: To appear JAA in Jun
Early Life Socioeconomic Circumstance and Late Life Brain Hyperintensities : A Population Based Cohort Study
Funding: Image acquisition and image analysis for this study was funded by the Alzheimer's Research Trust (now Alzheimer's Research UK). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Acknowledgments The authors would like to thank the participants of the Aberdeen 1936 Birth Cohort (ABC36), without whom this research would not have been possible.Peer reviewedPublisher PD
Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector
The inclusive and dijet production cross-sections have been measured for jets
containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass
energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The
measurements use data corresponding to an integrated luminosity of 34 pb^-1.
The b-jets are identified using either a lifetime-based method, where secondary
decay vertices of b-hadrons in jets are reconstructed using information from
the tracking detectors, or a muon-based method where the presence of a muon is
used to identify semileptonic decays of b-hadrons inside jets. The inclusive
b-jet cross-section is measured as a function of transverse momentum in the
range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet
cross-section is measured as a function of the dijet invariant mass in the
range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets
and the angular variable chi in two dijet mass regions. The results are
compared with next-to-leading-order QCD predictions. Good agreement is observed
between the measured cross-sections and the predictions obtained using POWHEG +
Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet
cross-section. However, it does not reproduce the measured inclusive
cross-section well, particularly for central b-jets with large transverse
momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final
version published in European Physical Journal
Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector
The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV
Study of decays to the final state and evidence for the decay
A study of decays is performed for the first time
using data corresponding to an integrated luminosity of 3.0
collected by the LHCb experiment in collisions at centre-of-mass energies
of and TeV. Evidence for the decay
is reported with a significance of 4.0 standard deviations, resulting in the
measurement of
to
be .
Here denotes a branching fraction while and
are the production cross-sections for and mesons.
An indication of weak annihilation is found for the region
, with a significance of
2.4 standard deviations.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-022.html,
link to supplemental material inserted in the reference
Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector
Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02 TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1 μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos2Δϕ modulation for all ΣETPb ranges and particle pT
Kroppenstedtia pulmonis sp. nov. and Kroppenstedtia sanguinis sp. nov., isolated from human patients
Three human clinical strains (W9323T, X0209T and X0394) isolated from lung biopsy, blood and cerebral spinal fluid, respectively, were characterized using a polyphasic taxonomic approach. Comparative analysis of the 16S rRNA gene sequences showed the three strains belonged to two novel branches within the genus Kroppenstedtia: 16S rRNA gene sequence analysis of W9323T showed closest sequence similarity to Kroppenstedtia eburnea JFMB-ATE T (95.3 %), Kroppenstedtia guangzhouensis GD02T (94.7 %) and strain X0209T (94.6 %); sequence analysis of strain X0209T showed closest sequence similarity to K. eburnea JFMB-ATE T (96.4 %) and K. guangzhouensis GD02T (96.0 %). Strains X0209T and X0394 were 99.9 % similar to each other by 16S rRNA gene sequence analysis. The DNA-DNA relatedness was 94.6 %, confirming that X0209T and X0394 belong to the same species. Chemotaxonomic data for strains W9323T and X0209T were consistent with those described for the genus Kroppenstedtia: whole-cell peptidoglycan contained LLdiaminopimelic acid; the major cellular fatty acids were iso-C15 and anteiso-C15; and the major menaquinone was MK-7. Different endospore morphology and carbon utilization profiles of strains W9323T and X0209T supported by phylogenetic analysis enabled us to conclude that the strains represent two new species within the genus Kroppenstedtia, for which the names Kroppenstedtia pulmonis sp. nov. (type strain W9323T =DSM 45752 T) and Kroppenstedtia sanguinis sp. nov. (type strain X0209T =DSM 45749T=CCUG 38657 T) are proposed
Recommended from our members
LEGO® bricks as building blocks for centimeter-scale biological environments
LEGO bricks are commercially available interlocking pieces of plastic that are conventionally used as toys. We describe their use to build engineered environments for cm-scale biological systems, in particular plant roots. Specifically, we take advantage of the unique modularity of these building blocks to create inexpensive, transparent, reconfigurable, and highly scalable environments for plant growth in which structural obstacles and chemical gradients can be precisely engineered to mimic soil
Euthanasia and other end-of-life decisions: a mortality follow-back study in Belgium
BACKGROUND: This study compares prevalence and types of medical end-of-life decisions between the Dutch-speaking and French-speaking communities of Belgium. This is the first nationwide study that can make these comparisons and the first measurement after implementation of the euthanasia law (2002). METHODS: We performed a mortality follow-back study in 2005-2006. Data were collected via the nationwide Sentinel Network of General Practitioners, an epidemiological surveillance system representative of all Belgian GPs.Weekly, all GPs reported the medical end-of-life decisions among all non-sudden deaths of patients in their practice. We compared the northern Dutch-speaking (60%) and southern French-speaking communities (40%) controlling for population differences. RESULTS: We analysed 1690 non-sudden deaths. An end-of-life decision with possible life-shortening effect was made in 50% of patients in the Dutch-speaking community and 41% of patients in the French-speaking community (OR 1.4; 95%CI, 1.2 to 1.8). Continuous deep sedation until death occurred in 8% and 15% respectively (OR 0.5; 95%CI, 0.4 to 0.7). Community differences regarding the prevalence of euthanasia or physician-assisted suicide were not significant.Community differences were more present among home/care home than among hospital deaths: non-treatment decisions with explicit life-shortening intention were made more often in the Dutch-speaking than in the French-speaking community settings (OR 2.2; 95%CI, 1.2 to 3.9); while continuous deep sedation occurred less often in the Dutch-speaking community settings (OR 0.5; 95%CI, 0.3 to 0.9). CONCLUSION: Even though legal and general healthcare systems are the same for the whole country, there are considerable variations between the communities in type and prevalence of certain end-of-life decisions, even after controlling for population difference
Interventional radiology virtual simulator for liver biopsy
Purpose
Training in Interventional Radiology currently uses the apprenticeship model, where clinical and technical skills of invasive procedures are learnt during practice in patients. This apprenticeship training method is increasingly limited by regulatory restrictions on working hours, concerns over patient risk through trainees’ inexperience and the variable exposure to case mix and emergencies during training. To address this, we have developed a computer-based simulation of visceral needle puncture procedures.
Methods
A real-time framework has been built that includes: segmentation, physically based modelling, haptics rendering, pseudo-ultrasound generation and the concept of a physical mannequin. It is the result of a close collaboration between different universities, involving computer scientists, clinicians, clinical engineers and occupational psychologists.
Results
The technical implementation of the framework is a robust and real-time simulation environment combining a physical platform and an immersive computerized virtual environment. The face, content and construct validation have been previously assessed, showing the reliability and effectiveness of this framework, as well as its potential for teaching visceral needle puncture.
Conclusion
A simulator for ultrasound-guided liver biopsy has been developed. It includes functionalities and metrics extracted from cognitive task analysis. This framework can be useful during training, particularly given the known difficulties in gaining significant practice of core skills in patients
- …
