Consideración de fuerzas de filtración en el análisis de estabilidad de taludes granulares

Para estudiar materiales porosos se presenta un modelo elastoplástico. Mediante dicho modelo es factible determinar las condiciones bajo las que sucede el colapso de taludes formados por materiales granulares saturados sujetos a un campo de fuerzas de filtración en régimen estacionario. Los análisis de estabilidad de talud desarrollados en este trabajo permiten calcular, con un adecuado nivel de precisión, el campo de flujo de agua y la condición de colapso de las masas de suelo bajo el flujo de agua y la carga interna, ambos generados por la gravedad. Las fuerzas de filtración varían espacialmente, en contraste con una distribución uniforme de dichas fuerzas, hipótesis en la que se fundamentan las soluciones analíticas de taludes infinitos. Solamente para ciertas combinaciones de parámetros de materiales y geometrías de taludes, los factores de seguridad calculados a partir de modelos de flujo uniforme y talud infinito se aproximan a aquellos determinados que toman en cuenta campos de flujo espacialmente variados y taludes bidimensionales. Bajo otras condiciones, la solución del talud infinito puede sobreestimar los factores de seguridad. Por último, se analizan los taludes no homogéneos en capas de diferentes materiales, considerando pequeñas variaciones de la permeabilidad. En la mayoría de los estudios de estabilidad, ya sea usando los métodos de equilibrio límite, análisis límite o, incluso, elemento finito, por lo común se calcula la distribución de presiones de poro con base, exclusivamente, en el perfil del nivel freático, sin resolver la ecuación del flujo estacionario. El presente estudio muestra que, si bien tal hipótesis se considera aceptable en los taludes homogéneos, se encuentra lejos de ser la adecuada para los taludes no homogéneos

AKARI and BLAST Observations of the Cassiopeia A Supernova Remnant and Surrounding Interstellar Medium

We use new large area far infrared maps ranging from 65 - 500 microns obtained with the AKARI and the Balloon-borne Large Aperture Submillimeter Telescope (BLAST) missions to characterize the dust emission toward the Cassiopeia A supernova remnant (SNR). Using the AKARI high resolution data we find a new "tepid" dust grain population at a temperature of ~35K and with an estimated mass of 0.06 solar masses. This component is confined to the central area of the SNR and may represent newly-formed dust in the unshocked supernova ejecta. While the mass of tepid dust that we measure is insufficient by itself to account for the dust observed at high redshift, it does constitute an additional dust population to contribute to those previously reported. We fit our maps at 65, 90, 140, 250, 350, and 500 microns to obtain maps of the column density and temperature of "cold" dust (near 16 K) distributed throughout the region. The large column density of cold dust associated with clouds seen in molecular emission extends continuously from the surrounding interstellar medium to project on the SNR, where the foreground component of the clouds is also detectable through optical, X-ray, and molecular extinction. At the resolution available here, there is no morphological signature to isolate any cold dust associated only with the SNR from this confusing interstellar emission. Our fit also recovers the previously detected "hot" dust in the remnant, with characteristic temperature 100 K.Comment: Accepted for publication in the Astrophysical Journal. Maps and related data are available at http://blastexperiment.info

Thermally-activated shape memory effect on biodegradable nanocomposites based on PLA/PCL blend reinforced with hydroxyapatite

[EN] In this work, the effect of the addition of different amount of nanosized hydroxyapatite (nHA) on the shape memory behavior of blends based on poly (lactic acid) (PLA) and poly (epsilon-caprolactone) (PCL) has been studied. In particular PLA/PCL blend with 70 wt % PLA has been reinforced with 0.5, 1 and 3 wt % nHA. Moreover, the relationship between the morphology and the final properties of the nanocomposites has been investigated by field emission scanning electron microscopy, confocal Raman spectroscopy and atomic force microscopy. In particular, PeakForce has been used to study quantitative nanomechanical properties of the multifunctional materials leading to conclusion that nHA increase the phase separation between PLA and PCL as well as act as reinforcements for the PCL-rich phase of the nanocomposites. Furthermore, excellent thermally-activated shape memory response has been obtained for all the nanocomposites at 55 degrees C. Finally, the disintegration under composting conditions at laboratory scale level was studied in order to confirm the biodegradable character of these nanocomposites. Indeed, these materials are able to be used for biomedical issues as well as for packaging applications where both thermally-activated shape memory effect and biodegradability are requested.Authors thank the Spanish Ministry of Economy, Industry and Competitiveness, MINEICO, (MAT2017-88123-P) and the Regional Government of Madrid (S2013/MIT-2862) for the economic support. M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINEICO, respectively. The authors also thanks CSIC for the I-Link project (I-Link1149).Peponi, L.; Sessini, V.; Arrieta, MP.; Navarro-Baena, I.; Sonseca Olalla, Á.; Dominici, F.; Giménez Torres, E.... (2018). Thermally-activated shape memory effect on biodegradable nanocomposites based on PLA/PCL blend reinforced with hydroxyapatite. Polymer Degradation and Stability. 151:36-51. https://doi.org/10.1016/j.polymdegradstab.2018.02.019S365115

Faecal microbiota and antibiotic resistance genes in migratory waterbirds with contrasting habitat use.

Migratory birds may have a vital role in the spread of antimicrobial resistance across habitats and regions, but empirical data remain scarce. We investigated differences in the gut microbiome composition and the abundance of antibiotic resistance genes (ARGs) in faeces from four migratory waterbirds wintering in South-West Spain that differ in their habitat use. The white stork Ciconia ciconia and lesser black-backed gull Larus fuscus are omnivorous and opportunistic birds that use highly anthropogenic habitats such as landfills and urban areas. The greylag goose Anser anser and common crane Grus grus are herbivores and use more natural habitats. Fresh faeces from 15 individuals of each species were analysed to assess the composition of bacterial communities using 16S rRNA amplicon-targeted sequencing, and to quantify the abundance of the Class I integron integrase gene (intI1) as well as genes encoding resistance to sulfonamides (sul1), beta-lactams (blaTEM, blaKPC and blaNDM), tetracyclines (tetW), fluoroquinolones (qnrS), and colistin (mcr-1) using qPCR. Bacterial communities in gull faeces were the richest and most diverse. Beta diversity analysis showed segregation in faecal communities between bird species, but those from storks and gulls were the most similar, these being the species that regularly feed in landfills. Potential bacterial pathogens identified in faeces differed significantly between bird species, with higher relative abundance in gulls. Faeces from birds that feed in landfills (stork and gull) contained a significantly higher abundance of ARGs (sul1, blaTEM, and tetW). Genes conferring resistance to last resort antibiotics such as carbapenems (blaKPC) and colistin (mcr-1) were only observed in faeces from gulls. These results show that these bird species are reservoirs of antimicrobial resistant bacteria and suggest that waterbirds may disseminate antibiotic resistance across environments (e.g., from landfills to ricefields or water supplies), and thus constitute a risk for their further spread to wildlife and humans. Copyright © 2021 Elsevier B.V. All rights reserved

Spatial variation and biovectoring of metals in gull faeces

We assessed the spatial variation in concentrations of ten metals in faeces of the lesser black-backed gull (LBBG) Larus fuscus wintering at seven localities in South-West Spain. We found high concentrations of metals in gull faeces, with several elements (As, Cu, Mo, Pb, Zn) locally exceeding (by 2 to 11 times) derived Lowest Effect Level (LEL) values. We also found strong spatial variation, related to the main pollution sources associated with the different sites. Faeces from Chipiona Port (Gulf of C?adiz) showed the highest levels of As; Cetina saltpans (Bay of C?adiz) ranked first for Pb, Zn and Mo, which was consistent with historic mining and industrial pollution; Don?ana ricefields showed the highest levels of Mn, a highly available element in flooded areas; while landfills ranked first for Cd, Co, Cr, Cu and Ni, potentially associated with electronic waste. Furthermore, we demonstrate how faecal analysis can be used to quantify biovectoring of metals into specific localities, using LBBG movement ecology and census data. At Fuente de Piedra, a shallow, closed-basin lake important for waterbirds, we show that metal inputs by LBBG have increased in recent years, and long-term deposition (e.g., of Pb) may impact aquatic communities and ecological processes in this Ramsar site

Thioredoxin Glutathione Reductase as a Novel Drug Target: Evidence from Schistosoma japonicum

Background: Schistosomiasis remains a major public health concern affecting billions of people around the world. Currently, praziquantel is the only drug of choice for treatment of human schistosomiasis. The emergence of drug resistance to praziquantel in schistosomes makes the development of novel drugs an urgent task. Thioredoxin glutathione reductase (TGR) enzymes in Schistosoma mansoni and some other platyhelminths have been identified as alternative targets. The present study was designed to confirm the existense and the potential value of TGR as a target for development of novel antischistosomal agents in Schistosoma japonicum, a platyhelminth endemic in Asia. Methods and Findings: After cloning the S. japonicum TGR (SjTGR) gene, the recombinant SjTGR selenoprotein was purified and characterized in enzymatic assays as a multifunctional enzyme with thioredoxin reductase (TrxR), glutathione reductase (GR) and glutaredoxin (Grx) activities. Immunological and bioinformatic analyses confirmed that instead of having separate TrxR and GR proteins in mammalian, S. japonicum only encodes TGR, which performs the functions of both enzymes and plays a critical role in maintaining the redox balance in this parasite. These results were in good agreement with previous findings in Schistosoma mansoni and some other platyhelminths. Auranofin, a known inhibitor against TGR, caused fatal toxicity in S. japonicum adult worms in vitro and reduced worm and egg burdens in S. japonicum infected mice. Conclusions: Collectively, our study confirms that a multifunctional enzyme SjTGR selenoprotein, instead of separate Trx

An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles

Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42, 400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences. © 2021, The Author(s)

An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles

Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences

Supplement: "Localization and broadband follow-up of the gravitational-wave transient GW150914" (2016, ApJL, 826, L13)

This Supplement provides supporting material for Abbott et al. (2016a). We briefly summarize past electromagnetic (EM) follow-up efforts as well as the organization and policy of the current EM follow-up program. We compare the four probability sky maps produced for the gravitational-wave transient GW150914, and provide additional details of the EM follow-up observations that were performed in the different bands