24 research outputs found
Estimation of elastic and viscous properties of the left ventricle based on annulus plane harmonic behavior
Assessment of left ventricular (LV) function
with an emphasis on contractility has been a challenge
in cardiac mechanics during the recent decades. The LV
function is usually described by the LV pressurevolume
(P-V) diagram. The standard P-V diagrams are
easy to interpret but difficult to obtain and require
invasive instrumentation for measuring the
corresponding volume and pressure data. In the present
study, we introduce a technique that can estimate the
viscoelastic properties of the LV based on harmonic
behavior of the ventricular chamber and it can be
applied non-invasively as well. The estimation technique
is based on modeling the actual long axis displacement
of the mitral annulus plane toward the cardiac base as a
linear damped oscillator with time-varying coefficients.
The time-varying parameters of the model were
estimated by a standard Recursive Linear Least
Squares (RLLS) technique. LV stiffness at end-systole
and end diastole was in the range of 61.86-136.00
dyne/g.cm and 1.25-21.02 dyne/g.cm, respectively. The
only input used in this model was the long axis
displacement of the annulus plane, which can also be
obtained non-invasively using tissue Doppler or MR
imaging
Fluorescence spectroscopy and imaging of myocardial apoptosis
Fluorometry is used to detect intrinsic flavoprotein (FP) and nicotinamide adenine dinucleotide NADH signals in an open-chest rabbit model of myocardial ischemia-reperfusion injury. Myocyte apoptosis has been shown clinically to contribute to infarct size following reperfusion of ischemic myocardium. A noninvasive means of assessing apoptosis in this setting would aid in the treatment of subsequent ventricular remodeling. We show that in vivo fluorometry can be useful in apoptosis detection in open-chest surgeries. Specific changes in myocardial redox states have been shown to indicate the presence of apoptosis. Two main mitochondrial intrinsic fluorophores, NADH and FP signals, were measured during normoxia, ischemia, and reperfusion experimental protocol. Ischemia was induced by occlusion of the largest branch of the circumflex coronary artery and fluorescence signals are collected by applying two different fluorescence techniques: in vivo fluorometry and postmortem cryoimaging. The first technique was employed to detect FP and NADH signals in vivo and the latter technique uses freeze trapping and lowtemperature fluorescence imaging. The heart is snap frozen while still in the chest cavity to make a snapshot of the metabolic state of the tissue. After freezing, the ischemic area and its surrounding border zone were excised and the sample was embedded in a frozen buffer for cryoscanning. These two data sets, in vivo fluorometry and low temperature redox scanning, show consistent extreme oxidation of the mitochondrial redox states (higher redox ratio) suggesting the initiation of apoptosis following reperfusion. This represents the first attempt to assess myocyte apoptosis in the beating heart
In-vivo heterogeneous functional and residual strains in human aortic valve leaflets
Residual and physiological functional strains in soft tissues are known to play an important role in modulating organ stress distributions. Yet, no known comprehensive information on residual strains exist, or non-invasive techniques to quantify in-vivo deformations for the aortic valve (AV) leaflets. Herein we present a completely non-invasive approach for determining heterogeneous strains – both functional and residual – in semilunar valves and apply it to normal human AV leaflets. Transesophageal 3D echocardiographic (3DE) images of the AV were acquired from open-heart transplant patients, with each AV leaflet excised after heart explant and then imaged in a flattened configuration ex-vivo. Using an established spline parameterization of both 3DE segmentations and digitized ex-vivo images (Aggarwal et al., 2014), surface strains were calculated for deformation between the ex-vivo and three in-vivo configurations: fully open, just-coapted, and fully-loaded. Results indicated that leaflet area increased by an average of 20% from the ex-vivo to in-vivo open states, with a highly heterogeneous strain field. The increase in area from open to just-coapted state was the highest at an average of 25%, while that from just-coapted to fully-loaded remained almost unaltered. Going from the ex-vivo to in-vivo mid-systole configurations, the leaflet area near the basal attachment shrank slightly, whereas the free edge expanded by ~10%. This was accompanied by a 10° −20° shear along the circumferential-radial direction. Moreover, the principal stretches aligned approximately with the circumferential and radial directions for all cases, with the highest stretch being along the radial direction. Collectively, these results indicated that even though the AV did not support any measurable pressure gradient in the just-coapted state, the leaflets were significantly pre-strained with respect to the excised state. Furthermore, the collagen fibers of the leaflet were almost fully recruited in the just-coapted state, making the leaflet very stiff with marginal deformation under full pressure. Lastly, the deformation was always higher in the radial direction and lower along the circumferential one, the latter direction made stiffer by the preferential alignment of collagen fibers. These results provide significant insight into the distribution of residual strains and the in-vivo strains encountered during valve opening and closing in AV leaflets, and will form an important component of the tool that can evaluate valve׳s functional properties in a non-invasive manner
Computational Sensitivity Investigation of Hydrogel Injection Characteristics for Myocardial Support
Biomaterial injection is a potential new therapy for augmenting ventricular mechanics after myocardial infarction (MI). Recent in vivo studies have demonstrated that hydrogel injections can mitigate the adverse remodeling due to MI. More importantly, the material properties of these injections influence the efficacy of the therapy. The goal of the current study is to explore the interrelated effects of injection stiffness and injection volume on diastolic ventricular wall stress and thickness. To achieve this, finite element models were constructed with different hydrogel injection volumes (150 µL and 300 µL), where the modulus was assessed over a range of 0.1 kPa to 100 kPa (based on experimental measurements). The results indicate that a larger injection volume and higher stiffness reduce diastolic myofiber stress the most, by maintaining the wall thickness during loading. Interestingly, the efficacy begins to taper after the hydrogel injection stiffness reaches a value of 50 kPa. This computational approach could be used in the future to evaluate the optimal properties of the hydrogel
Predictors of in-hospital mortality after mitral valve surgery for post-myocardial infarction papillary muscle rupture
Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field
Assessment of Left Ventricular Viscoelastic Components Based on Ventricular Harmonic Behavior
Assessment of left ventricular (LV) function
with an emphasis on contractility has been a challenge
in cardiac mechanics during the recent decades. The LV
function is usually described by the LV pressure-volume
(P-V) relationship. Based on this relationship, the ratio of
instantaneous pressure to instantaneous volume is an index
for LV chamber stiffness. The standard P-V diagrams are
easy to interpret but difficult to obtain and require invasive
instrumentation for measuring the corresponding volume
and pressure data. In the present study, we introduce a
technique that can estimate viscoelastic properties, not only
the elastic component but also the viscous properties of the
LV based on oscillatory behavior of the ventricular chamber
and it can be applied non-invasively as well. Materials and
Methods: The estimation technique is based on modeling
the actual long axis displacement of the mitral annulus plane
toward the cardiac base as a linear damped oscillator with
time-varying coefficients. Elastic deformations resulting
from the changes in the ventricular mechanical properties
of myocardium are represented as a time-varying spring
while the viscous components of the model include a time-varying
viscous damper, representing relaxation and the
frictional energy loss. To measure the left ventricular axial
displacement ten healthy sheep underwent left thoracotomy
and sonomicrometry transducers were implanted at the
apex and base of the LV The time-varying parameters of the
model were estimated by a standard Recursive Linear Least Squares (RLLS) technique. Results: LV stiffness at end-systole
and end-diastole was in the range of 61.86-136 dyne/g.cm
and 1.25-21.02 dyne/g.cm, respectively. Univariate linear
regression was performed to verify the agreement between
the estimated parameters, and the measured values of stiffness.
The averaged magnitude of the stiffness and damping
coefficients during a complete cardiac cycle were estimated
as 58.63 ± 12.8 dyne/g.cm and 0 dyne.s/g.cm, respectively.
Conclusion: The results for the estimated elastic coefficients
are consistent with the ones obtained from force displacement
diagram. The trend of change in the estimated
parameters is also in harmony with the previous studies
done using P-V diagram. The only input used in this model is
the long axis displacement of the annulus plane, which can
also be obtained non-invasively using tissue Doppler or MR
imaging