Procedural confidence in hospital based practitioners: implications for the training and practice of doctors at all grades

<p>Abstract</p> <p>Background</p> <p>Medical doctors routinely undertake a number of practical procedures and these should be performed competently. The UK Postgraduate Medical Education and Training Board (PMETB) curriculum lists the procedures trainees should be competent in. We aimed to describe medical practitioner's confidence in their procedural skills, and to define which practical procedures are important in current medical practice.</p> <p>Methods</p> <p>A cross sectional observational study was performed measuring procedural confidence in 181 hospital practitioners at all grades from 2 centres in East Anglia, England.</p> <p>Results</p> <p>Both trainees and consultants provide significant service provision. SpR level doctors perform the widest range and the highest median number of procedures per year. Most consultants perform few if any procedures, however some perform a narrow range at high volume. Cumulative confidence for the procedures tested peaks in the SpR grade. Five key procedures (central line insertion, lumbar puncture, pleural aspiration, ascitic aspiration, and intercostal drain insertion) are the most commonly performed, are seen as important generic skills, and correspond to the total number of procedures for which confidence can be maintained. Key determinants of confidence are gender, number of procedures performed in the previous year and total number of procedures performed.</p> <p>Conclusion</p> <p>The highest volume of service requirement is for six procedures. The procedural confidence is dependent upon gender, number of procedures performed in the previous year and total number of procedures performed. This has implications for those designing the training curriculum and with regards the move to shorten the duration of training.</p

Leadership Competencies for Digital Transformation : Evidence from Multiple Cases

Digital transformation (DT) is disrupting industrial organizations, which require significant changes in their properties to remain competitive. This calls for strong leadership to drive this transformation. However, what leadership competencies are required to lead DT impactfully is unclear. Therefore, we seek to identify the key leadership competencies by employing a qualitative, grounded theory approach. By conducting interviews of ten DT experts from two hardcore industrial organizations, we highlight five key leadership competencies that industrial organizations need to develop in their leaders: digital vision, digital knowledge, failing fast, empowerment, and managing diverse teams. The results of this study will help industrial organizations to strategically prepare their leadership for the requirements of DT.©2020 Springer. This is a post-peer-review, pre-copyedit version of an article published in Advances in Human Factors, Business Management and Leadership: Proceedings of the AHFE 2020 Virtual Conferences on Human Factors, Business Management and Society, and Human Factors in Management and Leadership, July 16-20, 2020, USA. The final authenticated version is available online at: http://dx.doi.org/0.1007/978-3-030-50791-6_11.fi=vertaisarvioitu|en=peerReviewed

Oligonucleotide Sequence Motifs as Nucleosome Positioning Signals

To gain a better understanding of the sequence patterns that characterize positioned nucleosomes, we first performed an analysis of the periodicities of the 256 tetranucleotides in a yeast genome-wide library of nucleosomal DNA sequences that was prepared by in vitro reconstitution. The approach entailed the identification and analysis of 24 unique tetranucleotides that were defined by 8 consensus sequences. These consensus sequences were shown to be responsible for most if not all of the tetranucleotide and dinucleotide periodicities displayed by the entire library, demonstrating that the periodicities of dinucleotides that characterize the yeast genome are, in actuality, due primarily to the 8 consensus sequences. A novel combination of experimental and bioinformatic approaches was then used to show that these tetranucleotides are important for preferred formation of nucleosomes at specific sites along DNA in vitro. These results were then compared to tetranucleotide patterns in genome-wide in vivo libraries from yeast and C. elegans in order to assess the contributions of DNA sequence in the control of nucleosome residency in the cell. These comparisons revealed striking similarities in the tetranucleotide occurrence profiles that are likely to be involved in nucleosome positioning in both in vitro and in vivo libraries, suggesting that DNA sequence is an important factor in the control of nucleosome placement in vivo. However, the strengths of the tetranucleotide periodicities were 3–4 fold higher in the in vitro as compared to the in vivo libraries, which implies that DNA sequence plays less of a role in dictating nucleosome positions in vivo. The results of this study have important implications for models of sequence-dependent positioning since they suggest that a defined subset of tetranucleotides is involved in preferred nucleosome occupancy and that these tetranucleotides are the major source of the dinucleotide periodicities that are characteristic of positioned nucleosomes

Gene expression and matrix turnover in overused and damaged tendons

Chronic, painful conditions affecting tendons, frequently known as tendinopathy, are very common types of sporting injury. The tendon extracellular matrix is substantially altered in tendinopathy, and these changes are thought to precede and underlie the clinical condition. The tendon cell response to repeated minor injuries or “overuse” is thought to be a major factor in the development of tendinopathy. Changes in matrix turnover may also be effected by the cellular response to physical load, altering the balance of matrix turnover and changing the structure and composition of the tendon. Matrix turnover is relatively high in tendons exposed to high mechanical demands, such as the supraspinatus and Achilles, and this is thought to represent either a repair or tissue maintenance function. Metalloproteinases are a large family of enzymes capable of degrading all of the tendon matrix components, and these are thought to play a major role in the degradation of matrix during development, adaptation and repair. It is proposed that some metalloproteinase enzymes are required for the health of the tendon, and others may be damaging, leading to degeneration of the tissue. Further research is required to investigate how these enzyme activities are regulated in tendon and altered in tendinopathy. A profile of all the metalloproteinases expressed and active in healthy and degenerate tendon is required and may lead to the development of new drug therapies for these common and debilitating sports injuries

MMP-3 in the peripheral serum as a biomarker of knee osteoarthritis, 40 years after open total knee meniscectomy.

BACKGROUND: To explore potential biomarkers in a meniscectomy-induced knee osteoarthritis model, at forty years after meniscectomy. METHODS: We carried out a forty-year study of 53 patients who, as adolescents, underwent open total meniscectomy and assessed two potential synovial and serum biomarkers, namely glycosaminoglycan (GAG) and matrix metalloproteinase-3 (MMP-3). Of the 30 patients available for review, 8 had contralateral knee operations and were excluded. Of the remaining 22 patients, 17 had successful operated knee synovial fluid aspirations and 8 also had successful contralateral control knee aspirations. GAG and MMP3 levels in the synovial fluid and peripheral serum was measured using Alcian blue precipitation and ELISA quantification, respectively. Patients also had their knee radiographs assessed and their radiographic osteoarthritis classified as per the Kellgren-Lawrence and Ahlbӓck systems. RESULTS: At forty years after meniscectomy, synovial MMP-3 levels remain increased (p = 0.0132) while GAG levels were reduced (p = 0.0487) when compared to controls and these two levels correlate inversely. Furthermore, levels of synovial MMP-3 significantly correlated (p = 0.0032, r = 0.7734; p = 0.0256, r = 0.5552) and GAG levels significantly inversely correlated (p = 0.0308, r = - 0.6220; p = 0.0135, r = - 0.6024), respectively, with both radiological scoring systems. Interestingly, we found that the levels of serum MMP-3 correlated only with the synovial fluid levels of MMP-3 in the operated knee and not with the non-operated joint (p = 0.0252, r = 0.7706 vs. p = 0.0764, r = 0.6576). Multiple regression analysis for patient's quality of life based on these biomarkers revealed an almost perfect result with an R2 of 0.9998 and a p value = 0.0087. CONCLUSION: Our results suggest that serum levels of MMP3 could be used as a potential biomarker for knee osteoarthritis, using a simple blood test. Larger cohorts are desirable in order to prove or disprove this finding

Influence of moisture contents on the fast pyrolysis of trommel fines in a bubbling fluidized bed reactor

In this study, the effect of moisture contents [2.69 wt% (bone-dry), 5 wt% and 10 wt%] on product yields and process conversion efficiency during fast pyrolysis of a pre-treated trommel fines feedstock was investigated at 500 °C. Experiments were carried out using a 300 g h −1 bubbling fluidised bed rig. Yields of organic liquids ranged from 15.2 to 19.6 wt% of feedstock, which decreased with increasing moisture content. Hence, the bone-dry feedstock gave the maximum yield and consequently the highest process conversion efficiency of 43%. Increased moisture content also led to increase formation of unidentified gas products, indicating increased conversion of organic liquids. Due to the high ash content of the feedstocks, about 52 wt% solid residues, containing around 82% ash was recovered in the char pot in each case. Hence, to maximize oil yields during fast pyrolysis, trommel fines would require extensive drying to remove the original 46 wt% moisture as well as reducing the ash content considerably. XRF analysis of the ash in the feedstock and solid residues showed that the main elements present included Ca, Si, Fe, Pb, K, Cl and Al. Apart from the presence of Pb (which may be from the glass contents of the feedstock), the solid residues could be used for land reclamation or co-incinerated at cement kilns for cement manufacture

Lateral Orbitofrontal Cortex Involvement in Initial Negative Aesthetic Impression Formation

It is well established that aesthetic appreciation is related with activity in several different brain regions. The identification of the neural correlates of beauty or liking ratings has been the focus of most prior studies. Not much attention has been directed towards the fact that humans are surrounded by objects that lead them to experience aesthetic indifference or leave them with a negative aesthetic impression. Here we explore the neural substrate of such experiences. Given the neuroimaging techniques that have been used, little is known about the temporal features of such brain activity. By means of magnetoencephalography we registered the moment at which brain activity differed while participants viewed images they considered to be beautiful or not. Results show that the first differential activity appears between 300 and 400 ms after stimulus onset. During this period activity in right lateral orbitofrontal cortex (lOFC) was greater while participants rated visual stimuli as not beautiful than when they rated them as beautiful. We argue that this activity is associated with an initial negative aesthetic impression formation, driven by the relative hedonic value of stimuli regarded as not beautiful. Additionally, our results contribute to the understanding of the nature of the functional roles of the lOFC

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV