Concentrations of silver nitrate in the in vitro development and conservation of Passiflora gibertii N. E. Brown.

The aim of this study was to evaluate the effects of silver nitrate in the in vitro development and conservation of passion fruit plants. Experiments were carried out at the Laboratory of Culture and Tissues, in the National Cassava and Fruits Research Center (EMBRAPA), using microcuttings of Passiflora gibertii N. E. Br., previously cultivated in vitro. The microcuttings were placed in MS media supplemented with silver nitrate at concentrations of 0, 1, 2, 4 and 8 mg·L-1, and, during 30, 60 and 90 days, the following variables were identified: Shooting length (cm), number of roots, number and coloration of leaves. A completely randomized design with 30 replications in a split-plot scheme was employed. Polynomial regression equations were adjusted in analysis of variance to compare averages of treatments. The obtained results support the assumption of high sensitivity of passion fruit tissues to ethylene, which reflects in the lost of vigor and in the induction of culture senescence by its accumulation. Based on obtained results, and in order to mitigate this problem, it is possible to indicate an addition of 2 mg·L-1 of silver nitrate in culture media, for the micropropagation of passion fruit plant, allowing the controlling of the atmosphere inside the culture test tubes, during the establishment of explants and other steps of the process

Rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART): study protocol for a randomized controlled trial

BACKGROUND: Acute respiratory distress syndrome (ARDS) is associated with high in-hospital mortality. Alveolar recruitment followed by ventilation at optimal titrated PEEP may reduce ventilator-induced lung injury and improve oxygenation in patients with ARDS, but the effects on mortality and other clinical outcomes remain unknown. This article reports the rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART). METHODS/DESIGN: ART is a pragmatic, multicenter, randomized (concealed), controlled trial, which aims to determine if maximum stepwise alveolar recruitment associated with PEEP titration is able to increase 28-day survival in patients with ARDS compared to conventional treatment (ARDSNet strategy). We will enroll adult patients with ARDS of less than 72 h duration. The intervention group will receive an alveolar recruitment maneuver, with stepwise increases of PEEP achieving 45 cmH2O and peak pressure of 60 cmH2O, followed by ventilation with optimal PEEP titrated according to the static compliance of the respiratory system. In the control group, mechanical ventilation will follow a conventional protocol (ARDSNet). In both groups, we will use controlled volume mode with low tidal volumes (4 to 6 mL/kg of predicted body weight) and targeting plateau pressure 6430 cmH2O. The primary outcome is 28-day survival, and the secondary outcomes are: length of ICU stay; length of hospital stay; pneumothorax requiring chest tube during first 7 days; barotrauma during first 7 days; mechanical ventilation-free days from days 1 to 28; ICU, in-hospital, and 6-month survival. ART is an event-guided trial planned to last until 520 events (deaths within 28 days) are observed. These events allow detection of a hazard ratio of 0.75, with 90% power and two-tailed type I error of 5%. All analysis will follow the intention-to-treat principle. DISCUSSION: If the ART strategy with maximum recruitment and PEEP titration improves 28-day survival, this will represent a notable advance to the care of ARDS patients. Conversely, if the ART strategy is similar or inferior to the current evidence-based strategy (ARDSNet), this should also change current practice as many institutions routinely employ recruitment maneuvers and set PEEP levels according to some titration metho

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

Rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART): Study protocol for a randomized controlled trial

Background: Acute respiratory distress syndrome (ARDS) is associated with high in-hospital mortality. Alveolar recruitment followed by ventilation at optimal titrated PEEP may reduce ventilator-induced lung injury and improve oxygenation in patients with ARDS, but the effects on mortality and other clinical outcomes remain unknown. This article reports the rationale, study design, and analysis plan of the Alveolar Recruitment for ARDS Trial (ART). Methods/Design: ART is a pragmatic, multicenter, randomized (concealed), controlled trial, which aims to determine if maximum stepwise alveolar recruitment associated with PEEP titration is able to increase 28-day survival in patients with ARDS compared to conventional treatment (ARDSNet strategy). We will enroll adult patients with ARDS of less than 72 h duration. The intervention group will receive an alveolar recruitment maneuver, with stepwise increases of PEEP achieving 45 cmH(2)O and peak pressure of 60 cmH2O, followed by ventilation with optimal PEEP titrated according to the static compliance of the respiratory system. In the control group, mechanical ventilation will follow a conventional protocol (ARDSNet). In both groups, we will use controlled volume mode with low tidal volumes (4 to 6 mL/kg of predicted body weight) and targeting plateau pressure <= 30 cmH2O. The primary outcome is 28-day survival, and the secondary outcomes are: length of ICU stay; length of hospital stay; pneumothorax requiring chest tube during first 7 days; barotrauma during first 7 days; mechanical ventilation-free days from days 1 to 28; ICU, in-hospital, and 6-month survival. ART is an event-guided trial planned to last until 520 events (deaths within 28 days) are observed. These events allow detection of a hazard ratio of 0.75, with 90% power and two-tailed type I error of 5%. All analysis will follow the intention-to-treat principle. Discussion: If the ART strategy with maximum recruitment and PEEP titration improves 28-day survival, this will represent a notable advance to the care of ARDS patients. Conversely, if the ART strategy is similar or inferior to the current evidence-based strategy (ARDSNet), this should also change current practice as many institutions routinely employ recruitment maneuvers and set PEEP levels according to some titration method.Hospital do Coracao (HCor) as part of the Program 'Hospitais de Excelencia a Servico do SUS (PROADI-SUS)'Brazilian Ministry of Healt

Caracterização hidráulica de três modelos do miniaspersor Mamkad autocompensante

Este trabalho foi desenvolvido com o objetivo de se avaliar as características hidráulicas de três modelos do miniaspersor Mamkad autocompensante, modelo Dan Sprinklers. Avaliou-se a variação decorrente do processo de fabricação, a uniformidade de distribuição de água e a equação característica da relação vazão versus pressão, visando fornecer recomendações para sua adequada seleção, com vistas ao dimensionamento de sistemas de irrigação localizada. O coeficiente de variação de fabricação para esses modelos permitiu classificá-los na categoria A, com o modelo amarelo apresentando a melhor uniformidade de distribuição de água. A vazão dos emissores aumentou em até 33,2%, quando submetidos a acréscimos de pressão, dentro do intervalo recomendado pelo fabricante

Modelo numérico do transporte de nitrogênio no solo. Parte I: Desenvolvimento e teste do modelo Numerical model of nitrogen transport in the soil. Part I: Model development and test

Este trabalho visa realizar modificações no modelo de transporte de soluto no solo SIMASS-C, permitindo-lhe simular as concentrações do nitrato e amônio no solo, considerando-se as transformações biológicas e o efeito da temperatura e do teor de água do solo. A primeira etapa da pesquisa constou da formulação matemática e da elaboração da rotina computacional do modelo, em linguagem Delphi 7.0; na segunda etapa foram parametrizados os modelos de mineralização e nitrificação e testado o modelo SIMASS-C modificado, com base em coeficientes estatísticos pela comparação entre os dados observados e os simulados. O modelo exponencial apresentou bom ajuste aos dados de mineralização e nitrificação. A inclusão do processo de mineralização e nitrificação no modelo SIMASS-C resultou em uma melhoria na estimativa da concentração de nitrato e amônio no solo, enquanto o modelo de temperatura permitiu estimar a temperatura na camada de solo analisada e ao longo do tempo, com boa precisão.This study aims at modifying the soil solute transport model SIMASS-C, allowing it to simulate the nitrate and ammonium concentrations in the soil, considering the biological transformations and the effect of temperature and water content of the soil. The first stage consisted of mathematical formulation and elaboration of a computational routine model, in the Delphi 7.0 language. In the second stage, the parameters of the mineralization and nitrification models were fitted and the SIMASS-C model tested, considering statistical coefficients and comparison between observed and simulated data. The exponential model gave a good fitting to the mineralization and nitrification data. The incorporation of the mineralization and nitrification processes in the SIMASS-C model resulted in an improvement in the estimate of the nitrate and ammonium concentrations in the soil. The temperature model allowed to estimate temperature in soil profile with good precision