Thermodynamic approach on the condensation risk in built environment

Paper presented to the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Florida, 14-16 July 2014.Worldwide energy consumption in residential and public buildings represents almost one third of primary energy. It is one of the larger contributors to fossil fuel use and the carbon dioxide production. Therefore, many countries are currently developing projects for the implementation of measures aimed at energy efficiency for built environment aiming targets of consumption reduction of 15% to 30%. However, less careful implementation of some measures for energy conservation is creating problems of water condensation in both, the newly constructed and the old buildings. Those are problems that created a bad perception regarding energy conservation measures, and also resulted in serious quality problems in built ambient. The main goal of this work is to evaluate the condensation risk in built environment and the influence on the energy consumption of the “inside” thermal insulation placement. A single-zone time-dependent mathematical model is developed based on specific parameters characterizing buildings´ use for commercial purposes. Numerical solutions are determined for commercial buildings over the course of a year. Suitable low cost strategies for energy conservation are developed to avoid condensation and mould growth for a typical classroom at the Federal University of Paraná, Curitiba, PR, Brazil, and to prevent further degradation in problem buildings.dc201

A comparison of characteristics of periodic surface micro/nano structures generated via single laser beam direct writing and particle lens array parallel beam processing

Abstract Changing material surface micro/nanostructures using laser beam texturing is a valuable approach in wide applications such as control of cell/bacterial adhesion and proliferation, solar cells and optical metamaterials. Here, we report a comparison of the characteristics of surface micro/nanostructures produced using single beam laser direct writing and particle lens array parallel laser beam patterning. A Nd:YVO4 nanosecond pulsed laser at the wavelength of 532 nm was used in the laser direct writing method to texture the stainless steel surface submerged in water and in air with different scanning patterns. Changes in surface morphology, wettability, surface chemistry, and optical reflectivity were analyzed. In the particle lens array method, an excimer nanosecond laser at 248 nm wavelength was adopted to produce surface patterns on GeSbTe (GST) film coated on a polycarbonate substrate by splitting and focusing a single laser beam into millions of parallel breams. Single beam laser direct writing shows that the surface of high roughness and oxygen percentage content presented high wettability and low reflectivity characteristics. However, the controllability of the type of surface micro/nanopatterns is limited. The parallel laser beam processing using particle lens array allows rapid production of user designed periodic surface patterns at nanoscale overcoming the optical diffraction limit with a high degree of controllability. Controlling the uniformity of the particle lens array is a challenge

Identification of a Locus on the X Chromosome Linked to Familial Membranous Nephropathy

INTRODUCTION: Membranous nephropathy (MN) is the most common cause of nephrotic syndrome (NS) in adults and is a leading cause of end-stage renal disease due to glomerulonephritis. Primary MN has a strong male predominance, accounting for approximately 65% of cases; yet, currently associated genetic loci are all located on autosomes. Previous reports of familial MN have suggested the existence of a potential X-linked susceptibility locus. Identification of such risk locus may provide clues to the etiology of MN. METHODS: We identified 3 families with 8 members affected by primary MN. Genotyping was performed using single-nucleotide polymorphism microarrays, and serum was sent for anti-phospholipase A2 receptor (PLA2R) antibody testing. All affected members were male and connected through the maternal line, consistent with X-linked inheritance. Genome-wide multipoint parametric linkage analysis using a model of X-linked recessive inheritance was conducted, and genetic risk scores (GRSs) based on known MN-associated variants were determined. RESULTS: Anti-PLA2R testing was negative in all affected family members. Linkage analysis revealed a significant logarithm of the odds score (3.260) on the short arm of the X chromosome at a locus of approximately 11 megabases (Mb). Haplotype reconstruction further uncovered a shared haplotype spanning 2 Mb present in all affected individuals from the 3 families. GRSs in familial MN were significantly lower than in anti-PLA2R–associated MN and were not different from controls. CONCLUSIONS: Our study identifies linkage of familial membranous nephropathy to chromosome Xp11.3-11.22. Family members affected with MN have a significantly lower GRS than individuals with anti-PLA2R–associated MN, suggesting that X-linked familial MN represents a separate etiologic entity

Description of familial keloids in five pedigrees: evidence for autosomal dominant inheritance and phenotypic heterogeneity

<p>Abstract</p> <p>Background</p> <p>Familial keloids have been reported, having either autosomal dominant or autosomal recessive inheritance. We wished to determine the inheritance pattern and phenotype of keloids among multigenerational families, as a prelude to a positional mapping strategy to identify candidate genes.</p> <p>Methods</p> <p>We studied three African American families, one Afro-Caribbean family and one Asian-American family. Phenotyping including assessing all patients for the presence, distribution, and appearance of keloids, together with the timing of keloid onset and provocative factors. The clinical trial was registered at clinicaltrials.gov (NCT 00005802).</p> <p>Results</p> <p>Age of keloid onset varied considerably within families, but commonly occurred by the second decade. The fraction of affected individuals was 38%, 45%, 62%, 67% and 73% among the five families respectively. Keloid severity and morphology differed within and between families. A novel finding is that certain families manifest keloids in distinct locations, with one family showing an excess of extremity keloids and two families showing an excess of axilla-groin keloids.</p> <p>Conclusion</p> <p>Familial keloids appear to most commonly manifest autosomal dominant or semidominant inheritance, and there may be familial patterns of keloid distribution.</p

Search for supersymmetric particles in scenarios with a gravitino LSP and stau NLSP

Sleptons, neutralinos and charginos were searched for in the context of scenarios where the lightest supersymmetric particle is the gravitino. It was assumed that the stau is the next-to-lightest supersymmetric particle. Data collected with the DELPHI detector at a centre-of-mass energy near 189 GeV were analysed combining the methods developed in previous searches at lower energies. No evidence for the production of these supersymmetric particles was found. Hence, limits were derived at 95% confidence level.Comment: 31 pages, 14 figure

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV