Analysis of artificial intelligence in industrial drives and development of fault deterrent novel machine learning prediction algorithm

Industrial sectors rely on electrical inverter drives to power their various load segments. Because the majority of their load is nonlinear, their drive system behaviour is unpredictable. Manufacturers continue to invest much in research and development to ensure that the device can resist any disturbances caused by the power system or load-side changes. The literature in this field of study depicts numerous effects caused by harmonics, a sudden inrush of currents, power interruption in all phases, leakage current effects and torque control of the system, among others. These and numerous other effects have been discovered as a result of research, and the inverter drive has been enhanced to a more advanced device than its earlier version. Despite these measures, inverter drives continue to operate poorly and frequently fail throughout the warranty term. This failure analysis is used as the basis for this research work, which presents a method for forecasting faulty sections using power system parameters. The said parameters were obtained by field-test dataset analysis in industrial premises. The prediction parameter is established by the examination of field research test data. The same data are used to train the machine learning system for future pre-emptive action. When exposed to live data feeds, the algorithm may forecast the future and suggest the same. Thus, when comparing the current status of the device to the planned study effort, the latter provides an advantage in terms of safeguarding the device and avoiding a brief period of total shutdown. As a result, the machine learning model was trained using the tested dataset and employed for prediction purposes; as a result, it provides a more accurate prediction, which benefits end consumers rather than improving the power system\u27s grid-side difficulties

Global injury morbidity and mortality from 1990 to 2017 : results from the Global Burden of Disease Study 2017

Correction:Background Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries. Methods We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs). Findings In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505). Interpretation Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.Peer reviewe

Global, regional, and national under-5 mortality, adult mortality, age-specific mortality, and life expectancy, 1970–2016: a systematic analysis for the Global Burden of Disease Study 2016

BACKGROUND: Detailed assessments of mortality patterns, particularly age-specific mortality, represent a crucial input that enables health systems to target interventions to specific populations. Understanding how all-cause mortality has changed with respect to development status can identify exemplars for best practice. To accomplish this, the Global Burden of Diseases, Injuries, and Risk Factors Study 2016 (GBD 2016) estimated age-specific and sex-specific all-cause mortality between 1970 and 2016 for 195 countries and territories and at the subnational level for the five countries with a population greater than 200 million in 2016. METHODS: We have evaluated how well civil registration systems captured deaths using a set of demographic methods called death distribution methods for adults and from consideration of survey and census data for children younger than 5 years. We generated an overall assessment of completeness of registration of deaths by dividing registered deaths in each location-year by our estimate of all-age deaths generated from our overall estimation process. For 163 locations, including subnational units in countries with a population greater than 200 million with complete vital registration (VR) systems, our estimates were largely driven by the observed data, with corrections for small fluctuations in numbers and estimation for recent years where there were lags in data reporting (lags were variable by location, generally between 1 year and 6 years). For other locations, we took advantage of different data sources available to measure under-5 mortality rates (U5MR) using complete birth histories, summary birth histories, and incomplete VR with adjustments; we measured adult mortality rate (the probability of death in individuals aged 15-60 years) using adjusted incomplete VR, sibling histories, and household death recall. We used the U5MR and adult mortality rate, together with crude death rate due to HIV in the GBD model life table system, to estimate age-specific and sex-specific death rates for each location-year. Using various international databases, we identified fatal discontinuities, which we defined as increases in the death rate of more than one death per million, resulting from conflict and terrorism, natural disasters, major transport or technological accidents, and a subset of epidemic infectious diseases; these were added to estimates in the relevant years. In 47 countries with an identified peak adult prevalence for HIV/AIDS of more than 0·5% and where VR systems were less than 65% complete, we informed our estimates of age-sex-specific mortality using the Estimation and Projection Package (EPP)-Spectrum model fitted to national HIV/AIDS prevalence surveys and antenatal clinic serosurveillance systems. We estimated stillbirths, early neonatal, late neonatal, and childhood mortality using both survey and VR data in spatiotemporal Gaussian process regression models. We estimated abridged life tables for all location-years using age-specific death rates. We grouped locations into development quintiles based on the Socio-demographic Index (SDI) and analysed mortality trends by quintile. Using spline regression, we estimated the expected mortality rate for each age-sex group as a function of SDI. We identified countries with higher life expectancy than expected by comparing observed life expectancy to anticipated life expectancy on the basis of development status alone. FINDINGS: Completeness in the registration of deaths increased from 28% in 1970 to a peak of 45% in 2013; completeness was lower after 2013 because of lags in reporting. Total deaths in children younger than 5 years decreased from 1970 to 2016, and slower decreases occurred at ages 5-24 years. By contrast, numbers of adult deaths increased in each 5-year age bracket above the age of 25 years. The distribution of annualised rates of change in age-specific mortality rate differed over the period 2000 to 2016 compared with earlier decades: increasing annualised rates of change were less frequent, although rising annualised rates of change still occurred in some locations, particularly for adolescent and younger adult age groups. Rates of stillbirths and under-5 mortality both decreased globally from 1970. Evidence for global convergence of death rates was mixed; although the absolute difference between age-standardised death rates narrowed between countries at the lowest and highest levels of SDI, the ratio of these death rates-a measure of relative inequality-increased slightly. There was a strong shift between 1970 and 2016 toward higher life expectancy, most noticeably at higher levels of SDI. Among countries with populations greater than 1 million in 2016, life expectancy at birth was highest for women in Japan, at 86·9 years (95% UI 86·7-87·2), and for men in Singapore, at 81·3 years (78·8-83·7) in 2016. Male life expectancy was generally lower than female life expectancy between 1970 and 2016, an

Mapping local patterns of childhood overweight and wasting in low- and middle-income countries between 2000 and 2017

A double burden of malnutrition occurs when individuals, household members or communities experience both undernutrition and overweight. Here, we show geospatial estimates of overweight and wasting prevalence among children under 5 years of age in 105 low- and middle-income countries (LMICs) from 2000 to 2017 and aggregate these to policy-relevant administrative units. Wasting decreased overall across LMICs between 2000 and 2017, from 8.4% (62.3 (55.1–70.8) million) to 6.4% (58.3 (47.6–70.7) million), but is predicted to remain above the World Health Organization’s Global Nutrition Target of <5% in over half of LMICs by 2025. Prevalence of overweight increased from 5.2% (30 (22.8–38.5) million) in 2000 to 6.0% (55.5 (44.8–67.9) million) children aged under 5 years in 2017. Areas most affected by double burden of malnutrition were located in Indonesia, Thailand, southeastern China, Botswana, Cameroon and central Nigeria. Our estimates provide a new perspective to researchers, policy makers and public health agencies in their efforts to address this global childhood syndemic

Global, regional, and national disability-adjusted life-years (DALYs) for 333 diseases and injuries and healthy life expectancy (HALE) for 195 countries and territories, 1990–2016: a systematic analysis for the Global Burden of Disease Study 2016

BACKGROUND: Measurement of changes in health across locations is useful to compare and contrast changing epidemiological patterns against health system performance and identify specific needs for resource allocation in research, policy development, and programme decision making. Using the Global Burden of Diseases, Injuries, and Risk Factors Study 2016, we drew from two widely used summary measures to monitor such changes in population health: disability-adjusted life-years (DALYs) and healthy life expectancy (HALE). We used these measures to track trends and benchmark progress compared with expected trends on the basis of the Socio-demographic Index (SDI). METHODS: We used results from the Global Burden of Diseases, Injuries, and Risk Factors Study 2016 for all-cause mortality, cause-specific mortality, and non-fatal disease burden to derive HALE and DALYs by sex for 195 countries and territories from 1990 to 2016. We calculated DALYs by summing years of life lost and years of life lived with disability for each location, age group, sex, and year. We estimated HALE using age-specific death rates and years of life lived with disability per capita. We explored how DALYs and HALE differed from expected trends when compared with the SDI: the geometric mean of income per person, educational attainment in the population older than age 15 years, and total fertility rate. FINDINGS: The highest globally observed HALE at birth for both women and men was in Singapore, at 75·2 years (95% uncertainty interval 71·9-78·6) for females and 72·0 years (68·8-75·1) for males. The lowest for females was in the Central African Republic (45·6 years [42·0-49·5]) and for males was in Lesotho (41·5 years [39·0-44·0]). From 1990 to 2016, global HALE increased by an average of 6·24 years (5·97-6·48) for both sexes combined. Global HALE increased by 6·04 years (5·74-6·27) for males and 6·49 years (6·08-6·77) for females, whereas HALE at age 65 years increased by 1·78 years (1·61-1·93) for males and 1·96 years (1·69-2·13) for females. Total global DALYs remained largely unchanged from 1990 to 2016 (-2·3% [-5·9 to 0·9]), with decreases in communicable, maternal, neonatal, and nutritional (CMNN) disease DALYs offset by increased DALYs due to non-communicable diseases (NCDs). The exemplars, calculated as the five lowest ratios of observed to expected age-standardised DALY rates in 2016, were Nicaragua, Costa Rica, the Maldives, Peru, and Israel. The leading three causes of DALYs globally were ischaemic heart disease, cerebrovascular disease, and lower respiratory infections, comprising 16·1% of all DALYs. Total DALYs and age-standardised DALY rates due to most CMNN causes decreased from 1990 to 2016. Conversely, the total DALY burden rose for most NCDs; however, age-standardised DALY rates due to NCDs declined globally. INTERPRETATION: At a global level, DALYs and HALE continue to show improvements. At the same time, we observe that many populations are facing growing functional health loss. Rising SDI was associated with increases in cumulative years of life lived with disability and decreases in CMNN DALYs offset by increased NCD DALYs. Relative compression of morbidity highlights the importance of continued health interventions, which has changed in most locations in pace with the gross domestic product per person, education, and family planning. The analysis of DALYs and HALE and their relationship to SDI represents a robust framework with which to benchmark location-specific health performance. Country-specific drivers of disease burden, particularly for causes with higher-than-expected DALYs, should inform health policies, health system improvement initiatives, targeted prevention efforts, and development assistance for health, including financial and research investments for all countries, regardless of their level of sociodemographic development. The presence of countries that substantially outperform others suggests the need for increased scrutiny for proven examples of best practices, which can help to extend gains, whereas the presence of underperforming countries suggests the need for devotion of extra attention to health systems that need more robust support. FUNDING: Bill & Melinda Gates Foundation

Increasing frailty is associated with higher prevalence and reduced recognition of delirium in older hospitalised inpatients: results of a multi-centre study

Purpose: Delirium is a neuropsychiatric disorder delineated by an acute change in cognition, attention, and consciousness. It is common, particularly in older adults, but poorly recognised. Frailty is the accumulation of deficits conferring an increased risk of adverse outcomes. We set out to determine how severity of frailty, as measured using the CFS, affected delirium rates, and recognition in hospitalised older people in the United Kingdom. Methods: Adults over 65 years were included in an observational multi-centre audit across UK hospitals, two prospective rounds, and one retrospective note review. Clinical Frailty Scale (CFS), delirium status, and 30-day outcomes were recorded. Results: The overall prevalence of delirium was 16.3% (483). Patients with delirium were more frail than patients without delirium (median CFS 6 vs 4). The risk of delirium was greater with increasing frailty [OR 2.9 (1.8–4.6) in CFS 4 vs 1–3; OR 12.4 (6.2–24.5) in CFS 8 vs 1–3]. Higher CFS was associated with reduced recognition of delirium (OR of 0.7 (0.3–1.9) in CFS 4 compared to 0.2 (0.1–0.7) in CFS 8). These risks were both independent of age and dementia. Conclusion: We have demonstrated an incremental increase in risk of delirium with increasing frailty. This has important clinical implications, suggesting that frailty may provide a more nuanced measure of vulnerability to delirium and poor outcomes. However, the most frail patients are least likely to have their delirium diagnosed and there is a significant lack of research into the underlying pathophysiology of both of these common geriatric syndromes

A Study of Inverter Drives and Its Ride Through Capabilities in Industrial Applications

In modern industry, majority of the mechanical elements are driven by either induction motors or special motors like servo motors, synchronous motors, BLDC motors. In order to drive the motors and to vary the speed of the motors, electronics drives are required. Since the drives are powered with three phase AC, if the power grid has power quality issue, which directly reflects on to the power electronics drives. As per Indian grid standards, power quality is defined as harmonics, surge, sag, swell, which was formulated in the year of 2003 and further revision was done in 2010. But in the recent day’s majority of the industries are constructed in same place (special economic zone), unpredicted industrial loads are increased and inserted in to existing running load, so eventually the power quality definition also changes and even sometimes connections are made as temporary for certain loads. Although these motors typically tolerate variations in utilization voltage, power quality professionals continue to spend a great deal of time answering questions about proper utilization voltage for a given motor. The voltage quality factors that create the most serious problems and confusion in the field include nominal utilization voltage that does not match the motor nameplate, proper voltage sag ride-through protection for the motor control circuitry, and phase-to-phase voltage imbalance. In review article, modern industry premises failure of components list and condition of power quality will be surveyed in various segments. Various failure of inverter drives namely, switching failure, commutation failure, common mode voltage problem, bearing current issues, harmonics etc., are discussed in details from various research article and presented in this review

Performance of CFC free propellant- driven MDI of fluticasone propionate

866-871Metered dose inhalers (MDIs) of fluticasone propionate were developed for treatment of asthma and chronic ob­structive pulmonary disease. MDIs with hydrofluoroalkanes based propellants were formulated with various doses, overages and various concentrations of alcohol. Optimum requirements were found as follows: effective valve delivery, overdoses (15%); 100% drug delivery, overages (20%); and emitted dose and fine particle fraction, alcohol content (5-10%)

Assessment of aeolian dust concentration, elemental composition, and their wet and dry deposition fluxes over the Northeast Arabian Sea

Atmospheric aerosol over the Arabian Sea is significantly impacted by the long-range transported mineral dust from the surrounding continents. This transported mineral dust is hypothesized and tested during several studies to see the impacts on the surface ocean biogeochemical processes and subsequently to the Carbon cycle. It is, thus important to quantify dust contributions and their fluxes to the Arabian Sea. Here we assess temporal variability of dust concentration, their elemental characteristics as well as quantify their dry and wet deposition fluxes over the North-eastern Arabian Sea. The dust concentrations were found to vary from 59 to 132 µg m−3 which accounts for 50% to 90% of total mass during dusty days. However, its contribution during pre and post dust storms ranges between 6% and 60%. Relatively higher dust dry deposition flux of 28 ± 7 mg m−2 day−1 (range: 20–44) is estimated for dusty days compared to pre and post dusty days (range: 0.4–22 mg m−2 day−1). In contrast to dry deposition fluxes, significantly higher fluxes are estimated from wet deposition, averaging around 240 ± 220 mg m−2 day−1. These values are five times higher than those reported from cruise samples collected over the Arabian Sea. The contribution of dust to aerosol mass is further ascertained using elemental composition, wherein a significant correlation was observed between Fe and Al (r2 = 0.77) for samples collected during the dusty period, highlighting their similar crustal sources. Our estimation of dust flux over this region has implications for the supply of nutrients associated with natural dust to the surface water of the Arabian Sea. Implications: The Arabian Sea, one of the productive oceanic regions among the global oceans, has been identified as a perennial source of atmospheric CO2. This basin is heavily impacted by atmospheric dust deposition/inputs owing to its geographical location being surrounded by arid and semi-arid regions. It has been hypothesized that aeolian dust plays a significant role in modulating surface water biogeochemical processes including primary productivity, in the Arabian Sea. Furthermore, modelling studies have highlighted on the role of dust (containing Fe) in fueling and enhancing primary productivity in the Arabian Sea. However, quantification of dust deposition fluxes (wet and dry) on seasonal time scale is missing in the literature. This paper aims to partially fulfil this research gap by providing a long-term data of wet and dry deposition fluxes over the northeastern Arabian Sea. We have also discussed their seasonal variability and factors affecting this flux. Thus, this study will be valuable contribution to the aeolian research community and have significant implication toward the role of aeolian deposition to the surface water biogeochemical processes in the Arabian Sea.</p