266 research outputs found
Effects of data quality vetoes on a search for compact binary coalescences in Advanced LIGO\u27s first observing run
The first observing run of Advanced LIGO spanned 4 months, from 12 September 2015 to 19 January 2016, during which gravitational waves were directly detected from two binary black hole systems, namely GW150914 and GW151226. Confident detection of gravitational waves requires an understanding of instrumental transients and artifacts that can reduce the sensitivity of a search. Studies of the quality of the detector data yield insights into the cause of instrumental artifacts and data quality vetoes specific to a search are produced to mitigate the effects of problematic data. In this paper, the systematic removal of noisy data from analysis time is shown to improve the sensitivity of searches for compact binary coalescences. The output of the PyCBC pipeline, which is a python-based code package used to search for gravitational wave signals from compact binary coalescences, is used as a metric for improvement. GW150914 was a loud enough signal that removing noisy data did not improve its significance. However, the removal of data with excess noise decreased the false alarm rate of GW151226 by more than two orders of magnitude, from 1 in 770 yr to less than 1 in 186 000 yr
The basic physics of the binary black hole merger GW150914
The first direct gravitational-wave detection was made by the Advanced Laser Interferometer Gravitational Wave Observatory on September 14, 2015. The GW150914 signal was strong enough to be apparent, without using any waveform model, in the filtered detector strain data. Here, features of the signal visible in the data are analyzed using concepts from Newtonian physics and general relativity, accessible to anyone with a general physics background. The simple analysis presented here is consistent with the fully general-relativistic analyses published elsewhere, in showing that the signal was produced by the inspiral and subsequent merger of two black holes. The black holes were each of approximately 35M(circle dot), still orbited each other as close as similar to 350 km apart and subsequently merged to form a single black hole. Similar reasoning, directly from the data, is used to roughly estimate how far these black holes were from the Earth, and the energy that they radiated in gravitational waves
Binary Black Hole Mergers in the First Advanced LIGO Observing Run
The first observational run of the Advanced LIGO detectors, from September 12, 2015 to January 19, 2016, saw the first detections of gravitational waves from binary black hole mergers. In this paper, we present full results from a search for binary black hole merger signals with total masses up to 100M. and detailed implications from our observations of these systems. Our search, based on general-relativistic models of gravitational-wave signals from binary black hole systems, unambiguously identified two signals, GW150914 and GW151226, with a significance of greater than 5 sigma over the observing period. It also identified a third possible signal, LVT151012, with substantially lower significance and with an 87% probability of being of astrophysical origin. We provide detailed estimates of the parameters of the observed systems. Both GW150914 and GW151226 provide an unprecedented opportunity to study the two-body motion of a compact-object binary in the large velocity, highly nonlinear regime. We do not observe any deviations from general relativity, and we place improved empirical bounds on several highorder post-Newtonian coefficients. From our observations, we infer stellar-mass binary black hole merger rates lying in the range 9-240 Gpc(-3) yr(-1). These observations are beginning to inform astrophysical predictions of binary black hole formation rates and indicate that future observing runs of the Advanced detector network will yield many more gravitational-wave detections
All-sky search for short gravitational-wave bursts in the first Advanced LIGO run
We present the results from an all-sky search for short-duration gravitational waves in the data of the first run of the Advanced LIGO detectors between September 2015 and January 2016. The search algorithms use minimal assumptions on the signal morphology, so they are sensitive to a wide range of sources emitting gravitational waves. The analyses target transient signals with duration ranging from milliseconds to seconds over the frequency band of 32 to 4096 Hz. The first observed gravitational-wave event, GW150914, has been detected with high confidence in this search; the other known gravitational-wave event, GW151226, falls below the search\u27s sensitivity. Besides GW150914, all of the search results are consistent with the expected rate of accidental noise coincidences. Finally, we estimate rate-density limits for a broad range of non-binary-black-hole transient gravitational-wave sources as a function of their gravitational radiation emission energy and their characteristic frequency. These rate-density upper limits are stricter than those previously published by an order of magnitude
SUPPLEMENT: THE RATE OF BINARY BLACK HOLE MERGERS INFERRED FROM ADVANCED LIGO OBSERVATIONS SURROUNDING GW150914 (2016, ApJL, 833, L1)
This article provides supplemental information for a Letter reporting the rate of (BBH) coalescences inferred from 16 days of coincident Advanced LIGO observations surrounding the transient (GW) signal GW150914. In that work we reported various rate estimates whose 90% confidence intervals fell in the range 2-600. Gpc(-3). yr(-1). Here we give details on our method and computations, including information about our search pipelines, a derivation of our likelihood function for the analysis, a description of the astrophysical search trigger distribution expected from merging BBHs, details on our computational methods, a description of the effects and our model for calibration uncertainty, and an analytic method for estimating our detector sensitivity, which is calibrated to our measurements
Recommended from our members
AIMES: advanced computation and I/O methods for earth-system simulations
Dealing with extreme scale Earth-system models is challenging from the computer science perspective, as the required computing power and storage capacity are steadily increasing.
Scientists perform runs with growing resolution or aggregate results from many similar smaller-scale runs with slightly different initial conditions (the so-called ensemble runs).
In the fifth Coupled Model Intercomparison Project (CMIP5), the produced datasets require more than three Petabytes of storage and the compute and storage requirements are increasing significantly for CMIP6.
Climate scientists across the globe are developing next-generation models based on improved numerical formulation leading to grids that are discretized in alternative forms such as an icosahedral (geodesic) grid.
The developers of these models face similar problems in scaling, maintaining and optimizing code.
Performance portability and the maintainability of code are key concerns of scientists as, compared to industry projects, model code is continuously revised and extended to incorporate further levels of detail.
This leads to a rapidly growing code base that is rarely refactored.
However, code modernization is important to maintain productivity of the scientist working
with the code and for utilizing performance provided by modern and future architectures.
The need for performance optimization is motivated by the evolution of the parallel architecture landscape from
homogeneous flat machines to heterogeneous combinations of processors with deep memory hierarchy.
Notably, the rise of many-core, throughput-oriented accelerators, such as GPUs, requires non-trivial code changes at minimum and, even worse, may necessitate a substantial rewrite of the existing codebase.
At the same time, the code complexity increases the difficulty for computer scientists and vendors to understand and optimize the code for a given system.
Storing the products of climate predictions requires a large storage and archival system which is expensive.
Often, scientists restrict the number of scientific variables and write interval to keep the costs
balanced.
Compression algorithms can reduce the costs significantly but can also increase the scientific yield of simulation runs.
In the AIMES project, we addressed the key issues of programmability, computational efficiency and I/O limitations that are common in next-generation icosahedral earth-system models.
The project focused on the separation of concerns between domain scientist, computational scientists, and computer scientists
Exploring the sensitivity of next generation gravitational wave detectors
The second-generation of gravitational-wave detectors are just starting operation, and have already yielding their first detections. Research is now concentrated on how to maximize the scientific potential of gravitational-wave astronomy. To support this effort, we present here design targets for a new generation of detectors, which will be capable of observing compact binary sources with high signal-to-noise ratio throughout the Universe
Performance of the CMS Cathode Strip Chambers with Cosmic Rays
The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device
in the CMS endcaps. Their performance has been evaluated using data taken
during a cosmic ray run in fall 2008. Measured noise levels are low, with the
number of noisy channels well below 1%. Coordinate resolution was measured for
all types of chambers, and fall in the range 47 microns to 243 microns. The
efficiencies for local charged track triggers, for hit and for segments
reconstruction were measured, and are above 99%. The timing resolution per
layer is approximately 5 ns
Student engagement and perceptions of blended-learning of a clinical module in a veterinary degree program.
Blended learning has received much interest in higher education as a way to increase learning efficiency and effectiveness. By combining face-to-face teaching with technology-enhanced learning through online resources, students can manage their own learning. Blended methods are of particular interest in professional degree programs such as veterinary medicine in which students need the flexibility to undertake intra- and extramural activities to develop the range of competencies required to achieve professional qualification. Yet how veterinary students engage with blended learning activities and whether they perceive the approach as beneficial is unclear. We evaluated blended learning through review of student feedback on a 4-week clinical module in a veterinary degree program. The module combined face-to-face sessions with online resources. Feedback was collected by means of a structured online questionnaire at the end of the module and log data collected as part of a routine teaching audit. The features of blended learning that support and detract from students’ learning experience were explored using quantitative and qualitative methods. Students perceived a benefit from aspects of face-to-face teaching and technology-enhanced learning resources. Face-to-face teaching was appreciated for practical activities, whereas online resources were considered effective for facilitating module organization and allowing flexible access to learning materials. The blended approach was particularly appreciated for clinical skills in which students valued a combination of visual resources and practical activities. Although we identified several limitations with online resources that need to be addressed when constructing blended courses, blended learning shows potential to enhance student-led learning in clinical courses
Performance and Operation of the CMS Electromagnetic Calorimeter
The operation and general performance of the CMS electromagnetic calorimeter
using cosmic-ray muons are described. These muons were recorded after the
closure of the CMS detector in late 2008. The calorimeter is made of lead
tungstate crystals and the overall status of the 75848 channels corresponding
to the barrel and endcap detectors is reported. The stability of crucial
operational parameters, such as high voltage, temperature and electronic noise,
is summarised and the performance of the light monitoring system is presented
- …