A comparison of the illness beliefs of people with angina and their peers: a questionnaire study

BACKGROUND: What people believe about their illness may affect how they cope with it. It has been suggested that such beliefs stem from those commonly held within society . This study compared the beliefs held by people with angina, regarding causation and coping in angina, with the beliefs of their friends who do not suffer from angina. METHODS: Postal survey using the York Angina Beliefs Questionnaire (version 1), which elicits stress attributions and misconceived beliefs about causation and coping. This was administered to 164 people with angina and their non-cohabiting friends matched for age and sex. 132 people with angina and 94 friends completed the questionnaire. RESULTS: Peers are more likely than people with angina to believe that angina is caused by a worn out heart (p <0.01), angina is a small heart attack (p = 0.02), and that it causes permanent damage to the heart (p <0.001). Peers were also more likely to believe that people with angina should take life easy (p <0.01) and avoid exercise (p = 0.04) and excitement (p <0.01). CONCLUSIONS: The beliefs of the peer group about causation and coping in angina run counter to professional advice. Over time this may contribute to a reduction in patient concordance with risk factor reduction, and may help to create cardiac invalids

A Guided Workbook Intervention (WorkPlan) to Support Work-Related Goals Among Cancer Survivors: Protocol of a Feasibility Randomized Controlled Trial

Background: Returning to and staying at work following illness is associated with better physical and psychological functioning. Not working has been shown to be associated with reduced self-esteem, lowered self-efficacy, and decreased belief in one's ability to return to the workplace. Although there is a growing body of research looking at what predicts return to work following cancer treatment, there are fewer studies examining interventions targeting return to work. Objective: The primary objective is to assess the feasibility and acceptability of a theoretically led workbook intervention designed to support cancer patients in returning to work to inform a fully powered randomized controlled trial (RCT). Methods: This is a multicenter feasibility RCT where the main analysis uses a qualitative approach. Sixty participants (aged 18-65 years) who have received a diagnosis of cancer and who intend to return to work will be randomized to either the WorkPlan intervention group or a usual care group (ratio 1:1). Participants in the intervention group will receive a guided workbook intervention (which contains activities aimed at eliciting thoughts and beliefs, identifying targets and actions, and concrete steps to achieve goals) and will receive telephone support over a 4-week period. The primary outcome measure is time taken to return to work (in days), and secondary outcome measures include mood, quality of life, illness perceptions, and job satisfaction. Data will be collected through postal questionnaires administered immediately postintervention and at 6- and 12-month follow-ups. In addition, interviews will be undertaken immediately postintervention (to explore acceptability of the intervention and materials) and at 12-month follow-up (to explore perceptions of participation in the trial and experiences of returning to work). Results: Enrollment for the study will be completed in May 2016. Data analysis will commence in April 2017, and the first results are expected to be submitted for publication in late 2017. Conclusions: Currently no standardized return-to-work intervention based on targeting cancer patient beliefs is in existence. If the intervention is shown to be feasible and acceptable, the results of this study will inform a future full RCT with the potential to provide a valuable and cost-efficient tool in supporting cancer survivors in the return-to-work process

Cancer and heart attack survivors’ expectations of employment status: results from the English Longitudinal Study of Ageing

Background: Sociodemographic, health- and work-related factors have been found to influence return to work in cancer survivors. It is feasible though that behavioural factors, such as expectation of being at work, could also affect work-related outcomes. Therefore, the effect of earlier identified factors and expectation of being at work on future employment status in cancer survivors was explored. To assess the degree to which these factors specifically concern cancer survivors, a comparison with heart attack survivors was made. Methods: Data from the English Longitudinal Study of Ageing were used. Cancer and heart attack survivors of working age in the UK were included and followed up for 2 years. Baseline characteristics of both cancer and heart attack survivors were compared regarding employment status. Univariate and multivariate regression analyses were performed in survivors at work, and the interaction between independent variables and diagnose group was assessed. Results: In cancer survivors at work (N = 159), alcohol consumption, participating in moderate or vigorous sport activities, general health and participation were univariate associated with employment status at two-year followup. Only fair general health (compared to very good general health) remained statistically significant in the multivariate model (OR 0.31; 95% CI 0.13–0.76; p = 0.010). In heart attack survivors at work (N = 78), gender, general health and expectation of being at work were univariate associated with employment status at follow-up. Female gender (OR 0.03; 95% CI 0.00–0.57; p = 0.018) and high expectation of being at work (OR 10.68; 95% CI 1.23–93.92; p = 0.033) remained significant in the multivariate model. The influence of gender (p = 0.066) and general health (p = 0.020) regarding employment status was found to differ significantly between cancer and heart attack survivors. Conclusions: When predicting future employment status in cancer survivors in the UK, general health is the most relevant factor to consider. While expectation of being at work did not show any significant influence in cancer survivors, in heart attack survivors, it should not be disregarded though, when developing interventions to affect their employment status. Future research should focus on more specific measures for expectation, and additional behavioural factors, such as self-efficacy, and their effect on employment status

Combined measurement of differential and total cross sections in the H → γγ and the H → ZZ* → 4ℓ decay channels at s=13 TeV with the ATLAS detector

A combined measurement of differential and inclusive total cross sections of Higgs boson production is performed using 36.1 fb−1 of 13 TeV proton–proton collision data produced by the LHC and recorded by the ATLAS detector in 2015 and 2016. Cross sections are obtained from measured H→γγ and H→ZZ*(→4ℓ event yields, which are combined taking into account detector efficiencies, resolution, acceptances and branching fractions. The total Higgs boson production cross section is measured to be 57.0−5.9 +6.0 (stat.) −3.3 +4.0 (syst.) pb, in agreement with the Standard Model prediction. Differential cross-section measurements are presented for the Higgs boson transverse momentum distribution, Higgs boson rapidity, number of jets produced together with the Higgs boson, and the transverse momentum of the leading jet. The results from the two decay channels are found to be compatible, and their combination agrees with the Standard Model predictions

Search for High-Mass Resonances Decaying to τν in pp Collisions at √s=13 TeV with the ATLAS Detector

A search for high-mass resonances decaying to τν using proton-proton collisions at √s=13 TeV produced by the Large Hadron Collider is presented. Only τ-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. No statistically significant excess above the standard model expectation is observed; model-independent upper limits are set on the visible τν production cross section. Heavy W′ bosons with masses less than 3.7 TeV in the sequential standard model and masses less than 2.2–3.8 TeV depending on the coupling in the nonuniversal G(221) model are excluded at the 95% credibility level

Search for the direct production of charginos and neutralinos in final states with tau leptons in √s=13 TeV collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with at least two hadronically decaying tau leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of 36.1 fb−1, recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 13TeV.Nosignificant deviation from the expected Standard Model background is observed. Limits are derived in scenarios of ˜χ+1 ˜χ−1 pair production and of ˜χ±1 ˜χ02 and ˜χ+1 ˜χ−1 production in simplified models where the neutralinos and charginos decay solely via intermediate left-handed staus and tau sneutrinos, and the mass of the ˜ τL state is set to be halfway between the masses of the ˜χ±1 and the ˜χ01. Chargino masses up to 630 GeV are excluded at 95% confidence level in the scenario of direct production of ˜χ+1 ˜χ−1 for a massless ˜χ01. Common ˜χ±1 and ˜χ02 masses up to 760 GeV are excluded in the case of production of ˜χ±1 ˜χ02 and ˜χ+1 ˜χ−1 assuming a massless ˜χ01. Exclusion limits for additional benchmark scenarios with large and small mass-splitting between the ˜χ±1 and the ˜χ01 are also studied by varying the ˜ τL mass between the masses of the ˜χ±1 and the ˜χ01

Measurement of differential cross sections and W + /W − cross-section ratios for W boson production in association with jets at √s =8 TeV with the ATLAS detector

This paper presents a measurement of the W boson production cross section and the W + /W − cross-section ratio, both in association with jets, in proton--proton collisions at s √ =8 TeV with the ATLAS experiment at the Large Hadron Collider. The measurement is performed in final states containing one electron and missing transverse momentum using data corresponding to an integrated luminosity of 20.2 fb −1 . Differential cross sections for events with one or two jets are presented for a range of observables, including jet transverse momenta and rapidities, the scalar sum of transverse momenta of the visible particles and the missing transverse momentum in the event, and the transverse momentum of the W boson. For a subset of the observables, the differential cross sections of positively and negatively charged W bosons are measured separately. In the cross-section ratio of W + /W − the dominant systematic uncertainties cancel out, improving the measurement precision by up to a factor of nine. The observables and ratios selected for this paper provide valuable input for the up quark, down quark, and gluon parton distribution functions of the proto

Measurement of the W±Z boson pair-production cross section in pp collisions at √s=13TeV with the ATLAS detector

published_or_final_versio

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8TeV with a total integrated luminosity of nearly 30 fb−1. The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report