The Similarity Hypothesis in General Relativity

Self-similar models are important in general relativity and other fundamental theories. In this paper we shall discuss the ``similarity hypothesis'', which asserts that under a variety of physical circumstances solutions of these theories will naturally evolve to a self-similar form. We will find there is good evidence for this in the context of both spatially homogenous and inhomogeneous cosmological models, although in some cases the self-similar model is only an intermediate attractor. There are also a wide variety of situations, including critical pheneomena, in which spherically symmetric models tend towards self-similarity. However, this does not happen in all cases and it is it is important to understand the prerequisites for the conjecture.Comment: to be submitted to Gen. Rel. Gra

The use of camu-camu (Myrciaria dubia) for the production of a fermented alcoholic beverage

The high levels of ascorbic acid in camu-camu (Myrciaria dubia McVaugh, Myrtaceae) have stimulated interest of extractivists, farmers and consumers. This has led to a need to develop adequate technology for it's production on non-flooded land and the industrial use of this fruit. This study had as its main objective to verify if camu-camu is adequate for the production of fermented alcoholic beverages, measuring the effect of blanching the fruit and the incorporation of the fruit peel with the fruit pulp on the nutritional and sensory characteristics of the drink. The fruits were separated into 4 groups, two being blanched (90 ºC for 7 minutes). After the pulp was removed, the peels of one group from each blanching treatment were incorporated into the respective pulps and their chemical composition evaluated. After sugar correction of the must, pasteurisation, fermentation (25 days), decanting, pasteurisation (70 ºC for 15 minutes), filtering and clarification, the beverages were evaluated as to their chemical composition, sweetened and submitted to sensory analysis. Blanching reduced the concentration of ascorbic acid in the pulps (33 %) and the addition of the peel increased the amount of dry matter (39 % in pulp), ascorbic acid (33 % in pulp, 23 % in must and 50 % in drink) and phenolic compounds (50 % in drink). The sensory profile and acceptability suggest that camu-camu is adequate for the production of fermented alcoholic beverages and that the addition of the peel to the pulp contributes positively to it's acceptability (6.7 with versus 6.2 without, of 9 points possible). The beverage had flavour characteristic of the fruit, a orangish-red color and agreeable taste.", 'enO elevado teor de ácido ascórbico no camu-camu (Myrciaria dubia McVaugh, Myrtaceae) desperta o interesse de extrativistas, agricultores e consumidores, e leva à necessidade de desenvolvimento de tecnologias adequadas para produção em terra firme e aproveitamento industrial do fruto. Este trabalho teve por objetivo verificar a adequação do camu-camu para a produção de bebida alcoólica fermentada, assim como o efeito do branqueamento do fruto e da incorporação da casca à polpa nas características nutricionais e sensoriais da bebida. Os frutos foram separados em quatro lotes, sendo dois branqueados (90 ºC por 7 min). Após a despolpa, as cascas de um lote de cada tratamento (com e sem branqueamento) foram incorporadas às respectivas polpas e avaliadas quanto à composição química (umidade, pH, acidez, sólidos solúveis, açúcares, ácido ascórbico, compostos fenólicos, antocianinas e flavonóides). Após a correção do mosto com açúcar, pasteurização, fermentação (25 dias), trasfega, pasteurização (70 ºC por 15 min), filtragem e clarificação, as bebidas foram avaliadas quanto a composição química, edulcoradas e submetidas à análise sensorial. O branqueamento reduziu a concentração de ácido ascórbico das polpas (33 %) e a agregação da casca aumentou os teores de matéria seca (39 % polpa), ácido ascórbico (33 % na polpa, 23 % no mosto e 50 % na bebida) e fenólicos (50 % bebida). O perfil sensorial e a aceitabilidade sugerem que o camu-camu é adequado para a produção de bebida alcoólica fermentada e que a agregação da casca à polpa contribuiu positivamente para a aceitabilidade (6,7 com casca e 6,2 sem casca, na escala de 9 pontos). As bebidas apresentaram flavor característico do fruto, limpidez, coloração vermelho-laranjada e sabor agradável

Astronomical Distance Determination in the Space Age: Secondary Distance Indicators

The formal division of the distance indicators into primary and secondary leads to difficulties in description of methods which can actually be used in two ways: with, and without the support of the other methods for scaling. Thus instead of concentrating on the scaling requirement we concentrate on all methods of distance determination to extragalactic sources which are designated, at least formally, to use for individual sources. Among those, the Supernovae Ia is clearly the leader due to its enormous success in determination of the expansion rate of the Universe. However, new methods are rapidly developing, and there is also a progress in more traditional methods. We give a general overview of the methods but we mostly concentrate on the most recent developments in each field, and future expectations. © 2018, The Author(s)

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions

Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC

A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the branching ratio Γ(Λb⁰ → ψ(2S)Λ0)/Γ(Λb⁰ → J/ψΛ0) with the ATLAS detector

An observation of the $\Lambda_b^0 \rightarrow \psi(2S) \Lambda^0$ decay and a comparison of its branching fraction with that of the $\Lambda_b^0 \rightarrow J/\psi \Lambda^0$ decay has been made with the ATLAS detector in proton--proton collisions at $\sqrt{s}=8\,$TeV at the LHC using an integrated luminosity of $20.6\,$fb$^{-1}$. The $J/\psi$ and $\psi(2S)$ mesons are reconstructed in their decays to a muon pair, while the $\Lambda^0\rightarrow p\pi^-$ decay is exploited for the $\Lambda^0$ baryon reconstruction. The $\Lambda_b^0$ baryons are reconstructed with transverse momentum $p_{\rm T}>10\,$GeV and pseudorapidity $|\eta|<2.1$. The measured branching ratio of the $\Lambda_b^0 \rightarrow \psi(2S) \Lambda^0$ and $\Lambda_b^0 \rightarrow J/\psi \Lambda^0$ decays is $\Gamma(\Lambda_b^0 \rightarrow \psi(2S)\Lambda^0)/\Gamma(\Lambda_b^0 \rightarrow J/\psi\Lambda^0) = 0.501\pm 0.033 ({\rm stat})\pm 0.019({\rm syst})$, lower than the expectation from the covariant quark model.Comment: 12 pages plus author list (28 pages total), 5 figures, 1 table, published on Physics Letters B 751 (2015) 63-80. All figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/BPHY-2013-08