Thick-Film and LTCC Passive Components for High-Temperature Electronics

At this very moment an increasing interest in the field of high-temperature electronics is observed. This is a result of development in the area of wide-band semiconductors’ engineering but this also generates needs for passives with appropriate characteristics. This paper presents fabrication as well as electrical and stability properties of passive components (resistors, capacitors, inductors) made in thick-film or Low-Temperature Co-fired Ceramics (LTCC) technologies fulfilling demands of high-temperature electronics. Passives with standard dimensions usually are prepared by screen-printing whereas combination of standard screen-printing with photolithography or laser shaping are recommenced for fabrication of micropassives. Attainment of proper characteristics versus temperature as well as satisfactory long-term high-temperature stability of micropassives is more difficult than for structures with typical dimensions for thick-film and LTCC technologies because of increase of interfacial processes’ importance. However it is shown that proper selection of thick-film inks together with proper deposition method permit to prepare thick-film micropassives (microresistors, air-cored microinductors and interdigital microcapacitors) suitable for the temperature range between 150°C and 400°C

Tunneling-percolation origin of nonuniversality: theory and experiments

A vast class of disordered conducting-insulating compounds close to the percolation threshold is characterized by nonuniversal values of transport critical exponent t, in disagreement with the standard theory of percolation which predicts t = 2.0 for all three dimensional systems. Various models have been proposed in order to explain the origin of such universality breakdown. Among them, the tunneling-percolation model calls into play tunneling processes between conducting particles which, under some general circumstances, could lead to transport exponents dependent of the mean tunneling distance a. The validity of such theory could be tested by changing the parameter a by means of an applied mechanical strain. We have applied this idea to universal and nonuniversal RuO2-glass composites. We show that when t > 2 the measured piezoresistive response \Gamma, i. e., the relative change of resistivity under applied strain, diverges logarithmically at the percolation threshold, while for t = 2, \Gamma does not show an appreciable dependence upon the RuO2 volume fraction. These results are consistent with a mean tunneling dependence of the nonuniversal transport exponent as predicted by the tunneling-percolation model. The experimental results are compared with analytical and numerical calculations on a random-resistor network model of tunneling-percolation.Comment: 13 pages, 12 figure

Electrostatic considerations affecting the calculated HOMO-LUMO gap in protein molecules.

A detailed study of energy differences between the highest occupied and lowest unoccupied molecular orbitals (HOMO-LUMO gaps) in protein systems and water clusters is presented. Recent work questioning the applicability of Kohn-Sham density-functional theory to proteins and large water clusters (E. Rudberg, J. Phys.: Condens. Mat. 2012, 24, 072202) has demonstrated vanishing HOMO-LUMO gaps for these systems, which is generally attributed to the treatment of exchange in the functional used. The present work shows that the vanishing gap is, in fact, an electrostatic artefact of the method used to prepare the system. Practical solutions for ensuring the gap is maintained when the system size is increased are demonstrated. This work has important implications for the use of large-scale density-functional theory in biomolecular systems, particularly in the simulation of photoemission, optical absorption and electronic transport, all of which depend critically on differences between energies of molecular orbitals.Comment: 13 pages, 4 figure

The potential of imogolite nanotubes as (co-)photocatalysts : a linear-scaling density functional theory study

We report a linear-scaling density functional theory (DFT) study of the structure, wall-polarization absolute band-alignment and optical absorption of several, recently synthesized, open-ended imogolite (Imo) nanotubes (NTs), namely single-walled (SW) aluminosilicate (AlSi), SW aluminogermanate (AlGe), SW methylated aluminosilicate (AlSi-Me), and double-walled (DW) AlGe NTs. Simulations with three different semi-local and dispersion-corrected DFT-functionals reveal that the NT wall-polarization can be increased by nearly a factor of four going from SW-AlSi-Me to DW-AlGe. Absolute vacuum alignment of the NT electronic bands and comparison with those of rutile and anatase TiO2 suggest that the NTs may exhibit marked propensity to both photo-reduction and hole-scavenging. Characterization of the NTs' band-separation and optical properties reveal the occurrence of (near-)UV inside–outside charge-transfer excitations, which may be effective for electron–hole separation and enhanced photocatalytic activity. Finally, the effects of the NTs' wall-polarization on the absolute alignment of electron and hole acceptor states of interacting water (H2O) molecules are quantified and discussed

Tension pneumocephalus following suboccipital sitting craniotomy in the pediatric population

Background Sitting craniotomy often results in entrapment of air in fluid-filled intracranial cavities. Gas under pressure exerts a deleterious effect on adjacent nervous tissue, resulting in clinical deterioration. Aim of study To assess the incidence of tension pneumocephalus (TP) and to define risk factors associated therewith. Material and method Analysis included 100 consecutive patients (57 boys, 43 girls, mean age 9.7 y) undergoing suboccipital sitting craniotomy since 2012 to 2014. Results In our material (n=100) TP was seen in 7 cases, asymptomatic pneumocephalus (AP) in 77 and no pneumocephalus (NP) in 16. Tumor types encountered were typical for pediatric population. In the TP group (n=7) the ratio of low-grade to high-grade tumors was 5:2, in the AP group (n=77) 2:1 and in the NP group (n=16) 1:1. Preoperative hydrocephalus was present in 21 cases (21%, mean incidence), thereof 3 in the TP group (3/7; 42.8%), 12 in AP group (12/77; 15.5%) and 6 in the NP group (6/16; 37.5%). All TP patients received an emergency external drainage, thereof 4 required a permanent ventriculo-peritoneal shunt (57.1%), while AP and NP patients combined (n=93) required a permanent shunt in 4 cases only (4.3%). TP-associated morbidity (n=2) consisted in a significant deterioration of neurological condition. Conclusions TP is a relatively rare but potentially serious complication of suboccipital sitting craniotomy. Risk factors for TP are low-grade tumor and pre-existing long-standing hydrocephalus. TP requires emergency decompression by temporary external drainage. TP patients significantly more often require a permanent CSF shunt

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Chemically selective alternatives to photoferroelectrics for polarization-enhanced photocatalysis: the untapped potential of hybrid inorganic nanotubes

Linear-scaling density functional theory simulation of methylated imogolite nanotubes (NTs) elucidates the interplay between wall-polarization, bands separation, charge-transfer excitation, and tunable electrostatics inside and outside the NT-cavity. The results suggest that integration of polarization-enhanced selective photocatalysis and chemical separation into one overall dipole-free material should be possible. Strategies are proposed to increase the NT polarization for maximally enhanced electron–hole separation

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Anatomy of sartorius muscle

A sartorius muscle is the longest muscle of the human system. It runs over 2 joints— hip and knee joints. In the study 10 sartorius muscles were examined. They were dissected free of lower human limbs. Dimensions of limbs which these muscles come from and dimensions of the muscles and their component parts were examined. The attention was paid mainly to parts of tendon located inside the muscle belly. The results show that they are either of a comparable length (distal tendon) or several times longer (proximal tendon) than visible parts located outside of the muscle. Moreover, a complex structure of the distal tendon which includes 2 tracts of different places of insertion was stated. Inferior tract inserted in the same place as muscle tendons: semitendinosus and gracilis. The superior tract inserted transversely against the former one. The tendon of the sartorius muscle forms additionally an aponeurosis whose fibres enter into the deep fascia of crus. The muscle belly is characterised with various width on different levels of its length. In half of casess word-like distal segment of belly is formed