Hydrogen-induced reversible spin-reorientation transition and magnetic stripe domain phase in bilayer Co on Ru(0001)

Imaging the change in the magnetization vector in real time by spin-polarized low-energy electron microscopy, we observed a hydrogen-induced, reversible spin-reorientation transition in a cobalt bilayer on Ru(0001). Initially, hydrogen sorption reduces the size of out-of-plane magnetic domains and leads to the formation of a magnetic stripe domain pattern, which can be understood as a consequence of reducing the out-of-plane magnetic anisotropy. Further hydrogen sorption induces a transition to an in-plane easy-axis. Desorbing the hydrogen by heating the film to 400 K recovers the original out-of-plane magnetization. By means of ab-initio calculations we determine that the origin of the transition is the local effect of the hybridization of the hydrogen orbital and the orbitals of the Co atoms bonded to the absorbed hydrogen.Comment: 5 figure

Life cycle environmental sustainability of valorisation routes for spent coffee grounds: From waste to resources

© 2020 The Authors. Spent coffee grounds (SCGs) have a potential to be used as a feedstock for higher value-added products, such as biodiesel. However, the environmental implications of the valorisation of SCGs are largely unknown. This study evaluates the life cycle environmental impacts of utilising SCGs for biodiesel production in comparison with the widely used disposal of SCGs as a waste stream: incineration, landfilling, anaerobic digestion, composting and direct application to land. The scope is from cradle to grave and the functional unit is defined as ‘treatment of 1 tonne of SCGs’. The results show that the most environmentally sustainable option is incineration of SCGs, with net-negative impacts (savings) in 14 out of 16 categories, followed by direct application of SCGs to land with 11 net-negative impacts. Biodiesel production is the least sustainable option with the highest impacts in 11 categories, followed by composting. The paper also demonstrates that following various waste hierarchy and resource valorisation guidelines instead of a life cycle approach could lead to a choice of environmentally inferior SCG utilisation options. Therefore, these guidelines should be revised to ensure that they are consistent and underpinned by life cycle thinking, thus aiding sustainable resource management in a circular economy context.UK Engineering and Physical Sciences Research Council (Gr. no. EP/K011820/1) and The University of Manchester through the N8 AgriFood Local Pump Priming Fun

Developing and implementing circular economy business models in service-oriented technology companies

The service sector has the potential to play an instrumental role in the shift towards circular economy due to its strategic position between manufacturers and end-users. However, there is a paucity of supporting methodologies and real-life applications to demonstrate how service-oriented companies can implement circular economy principles in daily business practice. This paper addresses this gap by analysing the potential of service-oriented companies in the information and communication technology (ICT) sector to build and implement circular economy business models. To this end, the Backcasting and Eco-design for the Circular Economy (BECE) framework is applied in an ICT firm. BECE, previously developed and demonstrated for product-oriented applications, has been developed further here for applications in the service sector. By shifting the focus from a product-oriented approach to a user-centred eco-design, the paper shows how ICT firms can identify, evaluate and prioritise sustainable business model innovations for circular economy. The two most promising business model innovations are explored strategically with the aim of designing circular economy models consistent with the company's priorities of customer satisfaction and profitability. The findings suggest that ICT companies may be able to support the deployment of a circular economy in the service-oriented technology sector. Importantly, micro and small organisations can play a fundamental role if provided with macro-level support to overcome company-level barriers. Finally, the BECE framework is shown to be a valuable resource to explore, analyse and guide the implementation of circular economy opportunities in service-oriented organisations. Further research to verify the application of the findings to other service-oriented organisations is recommended

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction

Hunt for new phenomena using large jet multiplicities and missing transverse momentum with ATLAS in 4.7 fb−1 of √s=7 TeV proton-proton collisions

Results are presented of a search for new particles decaying to large numbers of jets in association with missing transverse momentum, using 4.7 fb−1 of pp collision data at s√=7TeV collected by the ATLAS experiment at the Large Hadron Collider in 2011. The event selection requires missing transverse momentum, no isolated electrons or muons, and from ≥6 to ≥9 jets. No evidence is found for physics beyond the Standard Model. The results are interpreted in the context of a MSUGRA/CMSSM supersymmetric model, where, for large universal scalar mass m 0, gluino masses smaller than 840 GeV are excluded at the 95% confidence level, extending previously published limits. Within a simplified model containing only a gluino octet and a neutralino, gluino masses smaller than 870 GeV are similarly excluded for neutralino masses below 100 GeV

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns