Fire Hazards of Refrigerants in Air Conditioning Control System

Air conditioning control systems are commonly installed in restaurants, commercial buildings, office buildings and institutional buildings in Hong Kong. The systems invariably involve the use of fans for moving the air, filters for cleansing, ducts for air distribution, a control system for regulating the amount of heating or cooling automatically and a refrigerating plant connected to the heat exchange surface. The ducts in turn present the possibility of spreading fire and smoke throughout the building or areas served. According to the local Code of Practice for Minimum Fire Service Installations and Equipment [1], when a ventilation or air conditioning control system to a building is provided, it shall stop mechanically induced air movement within a designated fire compartment. In order to fulfil such requirement, the architects and building services engineers will design to install associated equipment of air conditioning control systems to satisfy the relevant fire safety requirements of the local authority, which includes the provision of fire resisting ducting, fire dampers, smoke detectors and fire resisting cables, etc. However, lessons learned from past experience reveal that owners or property management staff of the buildings or covered areas and maintenance contractors will mainly concern the efficiency and energy saving of the systems without paying much attention to the fire hazards arising from the use of refrigerants. It is also noted that fire or explosion incidents [2] involving air conditioning control systems are often attributed to improper maintenance work conducted by maintenance contractors, such as refilling the refrigerating plant with poor quality refrigerants, recharging refrigerants incompatible with the metal parts of the system, refilling refrigerants at high pressure resulting in bursting of piping and joints, valves contaminated by grease, presence of an ignition source in close proximity of the refrigerating plant, etc. In general, refrigerants present two basic hazards [3], namely toxicity and flammability. Refrigerants mix readily with air and if flammable, may reach flammable concentrations ready to be ignited by an ignition source. As diffusion may not take place rapidly enough to avoid the hazards in the event of leakage, fire or explosion may occur. With reference to a recent fire with explosion incident involving air conditioning control system in a restaurant in Hong Kong, this paper will outline and discuss the fire hazards of refrigerants in air conditioning control systems

Reliability and Validity of the Monitored Functional Task Evaluation (MFTE) for Patients with Chronic Obstructive Pulmonary Disease (COPD)

This article describes the development of a new functional measure — the Monitored Functional Task Evaluation (MFTE) — a symptom-limited evaluation that is used to measure the functional performance of an individual with chronic obstructive pulmonary disease (COPD), and to document a client's physiological changes through repeated testing. Stage I of the study included developing the content validity of the instrument. Stage II consisted of establishing the performance profile, test-retest and inter-rater reliability using a convenience sample of 27 inpatients and outpatients who had COPD. In stage III, the criterion-related and discriminative validity of the instrument was verified in a retrospective sample of 124 inpatients and day patients who had COPD. Results indicated that there was high intra- and inter-rater reliability for the total score of MFTE. Significant correlation of the MFTE was found with parameters such as Moser's Activities of Daily Living (ADL) class, COPD disability class, 6-minute walking distance, work capacity in terms the ratio of the metabolic rate associated with a given activity to the resting metabolic rate, and the fatigue dimension of the Chronic Respiratory Disease Questionnaire. In addition, prediction of group membership to Moser's ADL class revealed that 52.4% of the original grouped cases could be correctly classified by the MFTE alone. In conclusion, the MFTE is a useful measure to evaluate functional performance as well as document physiological changes in patients with moderate-to-severe COPD from both conceptual and empirical perspectives

Searches for lepton-flavour-violating decays of the Higgs boson in s=13\sqrt{s}=13 TeV pp\mathit{pp} collisions with the ATLAS detector

This Letter presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ , performed with the ATLAS detector at the LHC. The searches are based on a data sample of proton–proton collisions at a centre-of-mass energy √s = 13 TeV, corresponding to an integrated luminosity of 36.1 fb−1. No significant excess is observed above the expected background from Standard Model processes. The observed (median expected) 95% confidence-level upper limits on the leptonflavour-violating branching ratios are 0.47% (0.34+0.13−0.10%) and 0.28% (0.37+0.14−0.10%) for H → eτ and H → μτ , respectively.publishedVersio

Combination of searches for Higgs boson pairs in pp collisions at \sqrts = 13 TeV with the ATLAS detector

This letter presents a combination of searches for Higgs boson pair production using up to 36.1 fb(-1) of proton-proton collision data at a centre-of-mass energy root s = 13 TeV recorded with the ATLAS detector at the LHC. The combination is performed using six analyses searching for Higgs boson pairs decaying into the b (b) over barb (b) over bar, b (b) over barW(+)W(-), b (b) over bar tau(+)tau(-), W+W-W+W-, b (b) over bar gamma gamma and W+W-gamma gamma final states. Results are presented for non-resonant and resonant Higgs boson pair production modes. No statistically significant excess in data above the Standard Model predictions is found. The combined observed (expected) limit at 95% confidence level on the non-resonant Higgs boson pair production cross-section is 6.9 (10) times the predicted Standard Model cross-section. Limits are also set on the ratio (kappa(lambda)) of the Higgs boson self-coupling to its Standard Model value. This ratio is constrained at 95% confidence level in observation (expectation) to -5.0 &lt; kappa(lambda) &lt; 12.0 (-5.8 &lt; kappa(lambda) &lt; 12.0). In addition, limits are set on the production of narrow scalar resonances and spin-2 Kaluza-Klein Randall-Sundrum gravitons. Exclusion regions are also provided in the parameter space of the habemus Minimal Supersymmetric Standard Model and the Electroweak Singlet Model. For complete list of authors see http://dx.doi.org/10.1016/j.physletb.2019.135103</p

Search for flavour-changing neutral currents in processes with one top quark and a photon using 81 fb⁻¹ of pp collisions at \sqrts = 13 TeV with the ATLAS experiment

A search for flavour-changing neutral current (FCNC) events via the coupling of a top quark, a photon, and an up or charm quark is presented using 81 fb−1 of proton–proton collision data taken at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Events with a photon, an electron or muon, a b-tagged jet, and missing transverse momentum are selected. A neural network based on kinematic variables differentiates between events from signal and background processes. The data are consistent with the background-only hypothesis, and limits are set on the strength of the tqγ coupling in an effective field theory. These are also interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tuγ coupling of 36 fb (78 fb) and on the branching ratio for t→γu of 2.8×10−5 (6.1×10−5). In addition, they are interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tcγ coupling of 40 fb (33 fb) and on the branching ratio for t→γc of 22×10−5 (18×10−5). © 2019 The Author(s

Comparison between simulated and observed LHC beam backgrounds in the ATLAS experiment at Ebeam =4 TeV

Results of dedicated Monte Carlo simulations of beam-induced background (BIB) in the ATLAS experiment at the Large Hadron Collider (LHC) are presented and compared with data recorded in 2012. During normal physics operation this background arises mainly from scattering of the 4 TeV protons on residual gas in the beam pipe. Methods of reconstructing the BIB signals in the ATLAS detector, developed and implemented in the simulation chain based on the \textscFluka Monte Carlo simulation package, are described. The interaction rates are determined from the residual gas pressure distribution in the LHC ring in order to set an absolute scale on the predicted rates of BIB so that they can be compared quantitatively with data. Through these comparisons the origins of the BIB leading to different observables in the ATLAS detectors are analysed. The level of agreement between simulation results and BIB measurements by ATLAS in 2012 demonstrates that a good understanding of the origin of BIB has been reached

Search for pair production of boosted Higgs bosons via vector-boson fusion in the bb¯bb¯ final state using pp collisions at √s = 13 TeV with the ATLAS detector

A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at √s = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, K2V . This study constrains K2V to 0.55 &lt; K2V &lt; 1.49 at the 95% confidence level. The value K2V = 0 is excluded with a significance of 3.8 standard deviations with other Higgs boson couplings fixed to their Standard Model values. A search for new heavy spin-0 resonances that would mediate Higgs boson pair production via vector-boson fusion is carried out in the mass range of 1–5 TeV for the first time under several model and decay-width assumptions. No significant deviation from the Standard Model hypothesis is observed and exclusion limits at the 95% confidence level are derived

Simultaneous energy and mass calibration of large-radius jets with the ATLAS detector using a deep neural network

The energy and mass measurements of jets are crucial tasks for the Large Hadron Collider experiments. This paper presents a new calibration method to simultaneously calibrate these quantities for large-radius jets measured with the ATLAS detector using a deep neural network (DNN). To address the specificities of the calibration problem, special loss functions and training procedures are employed, and a complex network architecture, which includes feature annotation and residual connection layers, is used. The DNN-based calibration is compared to the standard numerical approach in an extensive series of tests. The DNN approach is found to perform significantly better in almost all of the tests and over most of the relevant kinematic phase space. In particular, it consistently improves the energy and mass resolutions, with a 30% better energy resolution obtained for transverse momenta pT > 500 GeV

Search for boosted diphoton resonances in the 10 to 70 GeV mass range using 138 fb−1 of 13 TeV pp collisions with the ATLAS detector

A search for diphoton resonances in the mass range between 10 and 70 GeV with the ATLAS experiment at the Large Hadron Collider (LHC) is presented. The analysis is based on pp collision data corresponding to an integrated luminosity of 138 fb−1 at a centre-of-mass energy of 13 TeV recorded from 2015 to 2018. Previous searches for diphoton resonances at the LHC have explored masses down to 65 GeV, finding no evidence of new particles. This search exploits the particular kinematics of events with pairs of closely spaced photons reconstructed in the detector, allowing examination of invariant masses down to 10 GeV. The presented strategy covers a region previously unexplored at hadron colliders because of the experimental challenges of recording low-energy photons and estimating the backgrounds. No significant excess is observed and the reported limits provide the strongest bound on promptly decaying axion-like particles coupling to gluons and photons for masses between 10 and 70 GeV

Evidence for the charge asymmetry in pp → tt¯ production at s√ = 13 TeV with the ATLAS detector

Inclusive and differential measurements of the top–antitop (tt¯) charge asymmetry Att¯C and the leptonic asymmetry Aℓℓ¯C are presented in proton–proton collisions at s√ = 13 TeV recorded by the ATLAS experiment at the CERN Large Hadron Collider. The measurement uses the complete Run 2 dataset, corresponding to an integrated luminosity of 139 fb−1, combines data in the single-lepton and dilepton channels, and employs reconstruction techniques adapted to both the resolved and boosted topologies. A Bayesian unfolding procedure is performed to correct for detector resolution and acceptance effects. The combined inclusive tt¯ charge asymmetry is measured to be Att¯C = 0.0068 ± 0.0015, which differs from zero by 4.7 standard deviations. Differential measurements are performed as a function of the invariant mass, transverse momentum and longitudinal boost of the tt¯ system. Both the inclusive and differential measurements are found to be compatible with the Standard Model predictions, at next-to-next-to-leading order in quantum chromodynamics perturbation theory with next-to-leading-order electroweak corrections. The measurements are interpreted in the framework of the Standard Model effective field theory, placing competitive bounds on several Wilson coefficients