History Dependence in a Chemical Reaction Network Enables Dynamic Switching

This work describes an enzymatic autocatalytic network capable of dynamic switching under out-of-equilibrium conditions. The network, wherein a molecular fuel (trypsinogen) and an inhibitor (soybean trypsin inhibitor) compete for a catalyst (trypsin), is kept from reaching equilibria using a continuous flow stirred tank reactor. A so-called ‘linear inhibition sweep’ is developed (i.e., a molecular analogue of linear sweep voltammetry) to intentionally perturb the competition between autocatalysis and inhibition, and used to demonstrate that a simple molecular system, comprising only three components, is already capable of a variety of essential neuromorphic behaviors (hysteresis, synchronization, resonance, and adaptation). This research provides the first steps in the development of a strategy that uses the principles in systems chemistry to transform chemical reaction networks into platforms capable of neural network computing.</p

Polylysine-Coated Surfaces Drive Competition in Chemical Reaction Networks to Enable Molecular Information Processing

This work describes a competing activation network, which is regulated by chemical feedback at the liquid-surface interface. Feedback loops dynamically tune the concentration of chemical components in living systems, thereby controlling regulatory processes in neural, genetic, and metabolic networks. Advances in systems chemistry demonstrate that chemical feedback could be designed based on similar concepts of using activation and inhibition processes. Most efforts, however, are focused on temporal feedback whereas biological networks are maintained by the interplay between temporal and spatial organization. Here, we designed a feedback system comprising a simple acid-base equilibrium that can be perturbed by two opposing activation processes. Crucially, one of the processes is immobilized on the surface of a microfluidic channel using poly-l-lysine (PLL). We measured the capacity of the PLL-coated channels to resist changes in pH in flow using a pH-sensitive indicator, phenol red, and showed that this capacity can be increased by employing polyelectrolyte multilayers. Specifically, we found that the rate of local activation (i. e., the deprotonation of the immobilized lysine residues) could be significantly increased to delay the otherwise fast equilibrium. This effect allowed for encoding read and write operations, providing the potential to bestow CRNs with the capacity of molecular information processing.</p

Conceptual Modeling Enables Systems Thinking in Sustainable Chemistry and Chemical Engineering

This study aims to equip students with conceptual modeling skills to address compelling 21st-century challenges in chemistry and chemical engineering education. System-based concept mapping is a critical competence for analyzing global, often complex, problems. We examined how conceptual modeling could scaffold practical experimental design, transitioning from problem identification to testable hypotheses. We set up a project in which first-year undergraduates in chemical engineering work in groups of 5–6 students. Their task was to develop concrete hypotheses for assignments that center on finding sustainable solutions for polluted environments. A set of educational roles (i.e., lecturers, tutors, learning assistants, educational specialist, and project coordinator) were implemented to ensure that students could accomplish their main learning outcome; that is, to become familiar with the academic way of thinking and apply critical thinking skills as a team. Interviews were conducted after the project was finished and revealed that, while conceptual modeling helped students to structure their ideas (i.e., to learn how to design research questions, incorporate interventions, and test models), developing hypotheses remains a challenging task. Our findings brought us to the recommendations for teaching conceptual modeling in the curriculum rather than at the project level, allowing students to progressively transition from understanding and applying concept mapping in their first year into creating solutions within the context of solving complex real-world problems in the final year of their bachelor’s degree. The collaborative learning environment and project format employed in this work could spark new ways to teach science that facilitates systems thinking in chemistr

Operation and performance of the ATLAS semiconductor tracker

The semiconductor tracker is a silicon microstrip detector forming part of the inner tracking system of the ATLAS experiment at the LHC. The operation and performance of the semiconductor tracker during the first years of LHC running are described. More than 99% of the detector modules were operational during this period, with an average intrinsic hit efficiency of (99.74±0.04)%. The evolution of the noise occupancy is discussed, and measurements of the Lorentz angle, δ-ray production and energy loss presented. The alignment of the detector is found to be stable at the few-micron level over long periods of time. Radiation damage measurements, which include the evolution of detector leakage currents, are found to be consistent with predictions and are used in the verification of radiation background simulations

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Measurements of fiducial cross-sections for t\bart production with one or two additional b-jets in pp collisions at √s =8 TeVusing the ATLAS detector

Fiducial cross-sections for $t\bar{t}$ production with one or two additional $b$-jets are reported, using an integrated luminosity of 20.3 fb$^{-1}$ of proton--proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for $t\bar{t}$ events with at least one additional $b$-jet is measured to be 950 $\pm$ 70 (stat.) $^{+240}_{-190}$ (syst.) fb in the lepton-plus-jets channel and 50 $\pm$ 10 (stat.) $^{+15}_{-10}$ (syst.) fb in the $e \mu$ channel. The cross-section times branching ratio for events with at least two additional $b$-jets is measured to be 19.3 $\pm$ 3.5 (stat.) $\pm$ 5.7 (syst.) fb in the dilepton channel ($e \mu$,\,$\mu\mu$, and \,$ee$) using a method based on tight selection criteria, and 13.5 $\pm$ 3.3 (stat.) $\pm$ 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 $\pm$ 0.33 (stat.) $\pm$ 0.28 (syst.)\% for the ratio of $t\bar{t}$ production with two additional $b$-jets to $t\bar{t}$ production with any two additional jets. All measurements are in good agreement with recent theory predictions.Comment: 41 pages plus author list + cover page (58 total), 9 Figures, 16 tables, submitted to EPJC, all figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2014-10

Search for W′→tb→qqbb decays in pp collisions at √s=8 TeV with the ATLAS detector

A search for a massive W′ gauge boson decaying to a top quark and a bottom quark is performed with the ATLAS detector in pp collisions at the LHC. The dataset was taken at a centre-of-mass energy of √s=8 TeV and corresponds to 20.3 fb−1 of integrated luminosity. This analysis is done in the hadronic decay mode of the top quark, where novel jet substructure techniques are used to identify jets from high-momentum top quarks. This allows for a search for high-mass W′ bosons in the range 1.5–3.0 TeV. b-tagging is used to identify jets originating from b-quarks. The data are consistent with Standard Model background-only expectations, and upper limits at 95 % confidence level are set on the W′→tb cross section times branching ratio ranging from 0.16pb to 0.33pb for left-handed W′ bosons, and ranging from 0.10pb to 0.21pb for W′ bosons with purely right-handed couplings. Upper limits at 95 % confidence level are set on the W′-boson coupling to tb as a function of the W′ mass using an effective field theory approach, which is independent of details of particular models predicting a W′boson

Measurement of event-shape observables in Z→ℓ+ℓ− events in pp collisions at √ s=7 TeV with the ATLAS detector at the LHC

Event-shape observables measured using charged particles in inclusive $Z$-boson events are presented, using the electron and muon decay modes of the $Z$ bosons. The measurements are based on an integrated luminosity of $1.1 {\rm fb}^{-1}$ of proton--proton collisions recorded by the ATLAS detector at the LHC at a centre-of-mass energy $\sqrt{s}=7$ TeV. Charged-particle distributions, excluding the lepton--antilepton pair from the $Z$-boson decay, are measured in different ranges of transverse momentum of the $Z$ boson. Distributions include multiplicity, scalar sum of transverse momenta, beam thrust, transverse thrust, spherocity, and $\mathcal{F}$-parameter, which are in particular sensitive to properties of the underlying event at small values of the $Z$-boson transverse momentum. The Sherpa event generator shows larger deviations from the measured observables than Pythia8 and Herwig7. Typically, all three Monte Carlo generators provide predictions that are in better agreement with the data at high $Z$-boson transverse momenta than at low $Z$-boson transverse momenta and for the observables that are less sensitive to the number of charged particles in the event.Comment: 36 pages plus author list + cover page (54 pages total), 14 figures, 4 tables, submitted to EPJC, All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2014-0

Measurement of the azimuthal anisotropy of Y(1S) and Y(2S) mesons in PbPb collisions at √S^{S}NN = 5.02 TeV

The second-order Fourier coefficients (υ$_{2}$) characterizing the azimuthal distributions of Υ(1S) and Υ(2S) mesons produced in PbPb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV are studied. The Υmesons are reconstructed in their dimuon decay channel, as measured by the CMS detector. The collected data set corresponds to an integrated luminosity of 1.7 nb$^{-1}$. The scalar product method is used to extract the υ$_{2}$ coefficients of the azimuthal distributions. Results are reported for the rapidity range |y| < 2.4, in the transverse momentum interval 0 < p$_{T}$ < 50 GeV/c, and in three centrality ranges of 10–30%, 30–50% and 50–90%. In contrast to the J/ψ mesons, the measured υ$_{2}$ values for the Υ mesons are found to be consistent with zero