Muscle Fatigue Analysis Using OpenSim

In this research, attempts are made to conduct concrete muscle fatigue analysis of arbitrary motions on OpenSim, a digital human modeling platform. A plug-in is written on the base of a muscle fatigue model, which makes it possible to calculate the decline of force-output capability of each muscle along time. The plug-in is tested on a three-dimensional, 29 degree-of-freedom human model. Motion data is obtained by motion capturing during an arbitrary running at a speed of 3.96 m/s. Ten muscles are selected for concrete analysis. As a result, the force-output capability of these muscles reduced to 60%-70% after 10 minutes' running, on a general basis. Erector spinae, which loses 39.2% of its maximal capability, is found to be more fatigue-exposed than the others. The influence of subject attributes (fatigability) is evaluated and discussed

Prevalence and Determinants of Obesity among Primary School Children in Dar es Salaam, Tanzania.

Childhood obesity has increased dramatically and has become a public health concern worldwide. Childhood obesity is likely to persist through adulthood and may lead to early onset of NCDs. However, there is paucity of data on obesity among primary school children in Tanzania. This study assessed the prevalence and determinants of obesity among primary school children in Dar es Salaam. A cross sectional study was conducted among school age children in randomly selected schools in Dar es Salaam. Anthropometric and blood pressure measurements were taken using standard procedures. Body Mass Index (BMI) was calculated as weight in kilograms divided by the square of height in meters (kg/m2). Child obesity was defined as BMI at or above 95th percentile for age and sex. Socio-demographic characteristics of children were determined using a structured questionnaire. Logistic regression was used to determine association between independent variables with obesity among primary school children in Dar es Salaam. A total of 446 children were included in the analysis. The mean age of the participants was 11.1±2.0 years and 53.1% were girls. The mean BMI, SBP and DBP were 16.6±4.0 kg/m2, 103.9±10.3mmHg and 65.6±8.2mmHg respectively. The overall prevalence of child obesity was 5.2% and was higher among girls (6.3%) compared to boys (3.8%). Obese children had significantly higher mean values for age (p=0.042), systolic and diastolic blood pressures (all p<0.001). Most obese children were from households with fewer children (p=0.019) and residing in urban areas (p=0.002). Controlling for other variables, age above 10 years (AOR=3.3, 95% CI=1.5-7.2), female sex (AOR=2.6, 95% CI=1.4-4.9), urban residence (AOR=2.5, 95% CI=1.2-5.3) and having money to spend at school (AOR=2.6, 95% CI=1.4-4.8) were significantly associated with child obesity. The prevalence of childhood obesity in this population was found to be low. However, children from urban schools and girls were proportionately more obese compared to their counterparts. Primary preventive measures for childhood obesity should start early in childhood and address socioeconomic factors of parents contributing to childhood obesity

How functional programming mattered

In 1989 when functional programming was still considered a niche topic, Hughes wrote a visionary paper arguing convincingly ‘why functional programming matters’. More than two decades have passed. Has functional programming really mattered? Our answer is a resounding ‘Yes!’. Functional programming is now at the forefront of a new generation of programming technologies, and enjoying increasing popularity and influence. In this paper, we review the impact of functional programming, focusing on how it has changed the way we may construct programs, the way we may verify programs, and fundamentally the way we may think about programs

Bio-inspired nanocatalysts for the oxygen reduction reaction

Electrochemical conversions at fuel cell electrodes are complex processes. In particular, the oxygen reduction reaction has substantial overpotential limiting the electrical power output efficiency. Effective and inexpensive catalytic interfaces are therefore essential for increased performance. Taking inspiration from enzymes, earth-abundant metal centres embedded in organic environments present remarkable catalytic active sites. Here we show that these enzyme-inspired centres can be effectively mimicked in two-dimensional metal-organic coordination networks self-assembled on electrode surfaces. Networks consisting of trimesic acid and bis-pyridyl-bispyrimidine coordinating to single iron and manganese atoms on Au(111) effectively catalyse the reduction and reveal distinctive catalytic activity in alkaline media. These results demonstrate the potential of surface-engineered metal-organic networks for electrocatalytic conversions. Specifically designed coordination complexes at surfaces inspired by enzyme cofactors represent a new class of nanocatalysts with promising applications in electrocatalysis.Fil: Grumelli, Doris Elda. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentina. Max Planck Institute for Solid State Research; AlemaniaFil: Wurtser, Benjamin. Max Planck Institute for Solid State Research; AlemaniaFil: Stepanow, Sabastian. Max Planck Institute for Solid State Research; AlemaniaFil: Kern, Klaus. Max Planck Institute for Solid State Research; Alemania. Ecole Polytechnique Federale de Lausanne; Suiz

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Chair based exercise in community settings: a cluster randomised feasibility study

Background: Some older people who find standard exercise programmes too strenuous may be encouraged to exercise while remaining seated - chair based exercises (CBE). We previously developed a consensus CBE programme (CCBE) following a modified Delphi process. We firstly needed to test the feasibility and acceptability of this treatment approach and explore how best to evaluate it before undertaking a definitive trial. Methods: A feasibility study with a cluster randomised controlled trial component was undertaken to 1. Examine the acceptability, feasibility and tolerability of the intervention and 2. Assess the feasibility of running a trial across 12 community settings (4 day centres, 4 care homes, 4 community groups). Centres were randomised to either CCBE, group reminiscence or usual care. Outcomes were collected to assess the feasibility of the trial parameters: level of recruitment interest and eligibility, randomisation, adverse events, retention, completion of health outcomes, missing data and delivery of the CCBE. Semi- structured interviews were conducted with participants and care staff following the intervention to explore acceptability. Results: 48% (89 out of 184 contacted) of eligible centres were interested in participating with 12 recruited purposively. 73% (94) of the 128 older people screened consented to take part with 83 older people then randomised following mobility testing. Recruitment required greater staffing levels and resources due to 49% of participants requiring a consultee declaration. There was a high dropout rate (40%) primarily due to participants no longer attending the centres. The CCBE intervention was delivered once a week in day centres and community groups and twice a week in care homes. Older people and care staff found the CCBE intervention largely acceptable. Conclusion: There was a good level of interest from centres and older people and the CCBE intervention was largely welcomed. The trial design and governance procedures would need to be revised to maximise recruitment and retention. If the motivation for a future trial is physical health then this study has identified that further work to develop the CCBE delivery model is warranted to ensure it can be delivered at a frequency to elicit physiological change. If the motivation for a future trial is psychological outcomes then this study has identified that the current delivery model is feasible

Interplay of LFV and slepton mass splittings at the LHC as a probe of the SUSY seesaw

We study the impact of a type-I SUSY seesaw concerning lepton flavour violation (LFV) both at low-energies and at the LHC. The study of the di-lepton invariant mass distribution at the LHC allows to reconstruct some of the masses of the different sparticles involved in a decay chain. In particular, the combination with other observables renders feasible the reconstruction of the masses of the intermediate sleptons involved in $\chi_2^0\to \tilde \ell \,\ell \to \ell \,\ell\,\chi_1^0$ decays. Slepton mass splittings can be either interpreted as a signal of non-universality in the SUSY soft breaking-terms (signalling a deviation from constrained scenarios as the cMSSM) or as being due to the violation of lepton flavour. In the latter case, in addition to these high-energy processes, one expects further low-energy manifestations of LFV such as radiative and three-body lepton decays. Under the assumption of a type-I seesaw as the source of neutrino masses and mixings, all these LFV observables are related. Working in the framework of the cMSSM extended by three right-handed neutrino superfields, we conduct a systematic analysis addressing the simultaneous implications of the SUSY seesaw for both high- and low-energy lepton flavour violation. We discuss how the confrontation of slepton mass splittings as observed at the LHC and low-energy LFV observables may provide important information about the underlying mechanism of LFV.Comment: 50 pages, 42 eps Figures, typos correcte

The Long Term Response of Birds to Climate Change: New Results from a Cold Stage Avifauna in Northern England

The early MIS 3 (55–40 Kyr BP associated with Middle Palaeolithic archaeology) bird remains from Pin Hole, Creswell Crags, Derbyshire, England are analysed in the context of the new dating of the site’s stratigraphy. The analysis is restricted to the material from the early MIS 3 level of the cave because the upper fauna is now known to include Holocene material as well as that from the Late Glacial. The results of the analysis confirm the presence of the taxa, possibly unexpected for a Late Pleistocene glacial deposit including records such as Alpine swift, demoiselle crane and long-legged buzzard with southern and/or eastern distributions today. These taxa are accompanied by more expected ones such as willow ptarmigan /red grouse and rock ptarmigan living today in northern and montane areas. Finally, there are temperate taxa normally requiring trees for nesting such as wood pigeon and grey heron. Therefore, the result of the analysis is that the avifauna of early MIS 3 in England included taxa whose ranges today do not overlap making it a non-analogue community similar to the many steppe-tundra mammalian faunas of the time. The inclusion of more temperate and woodland taxa is discussed in the light that parts of northern Europe may have acted as cryptic northern refugia for some such taxa during the last glacial. These records showing former ranges of taxa are considered in the light of modern phylogeographic studies as these often assume former ranges without considering the fossil record of those taxa. In addition to the anomalous combination of taxa during MIS 3 living in Derbyshire, the individuals of a number of the taxa are different in size and shape to members of the species today probably due to the high carrying capacity of the steppe-tundra