1,251 research outputs found

    Carbon Monoxide Diffusion Capacity as a Severity Marker in Pulmonary Hypertension.

    Get PDF
    Carbon monoxide diffusion capacity (DLCO) is negatively associated with patient survival in idiopathic pulmonary hypertension (PH), but is not included in the risk stratification score proposed by the 2015 European guidelines. Since 2015, several new stratification scores based on a 3- or 4-severity scale have been explored. This retrospective cohort single-center study sought to investigate the association between DLCO and PH severity and survival. We included 85 treatment-naive patients with precapillary PH and DLCO measurement at diagnosis. DLCO status, based on lower and upper quartiles ranges, was added to a 3- and a 4-strata modified-risk assessment. DLCO was strongly associated with transplant-free survival (HR 0.939, 95% CI: 0.908-0.971, p < 0.001). In the intermediate and high-risk categories, DLCO was associated with transplant-free survival, irrespective of the risk category (HR 0.934, 95% CI: 0.880-0.980, p = 0.005). The correlation between modified-risk category and transplant-free survival was significant (HR 4.60, 95% CI: 1.294-16.352, p = 0.018). Based on the Akaike information criterion (AIC) levels, the 3- and 4-strata modified-risk stratification fits our results better than the conventional stratification. Low DLCO is associated with patient transplant-free survival, independently of the risk category. Inclusion of DLCO into a PH risk stratification score seems promising and needs further investigation

    Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

    Search for direct stau production in events with two hadronic tau-leptons in root s=13 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for the direct production of the supersymmetric partners ofτ-leptons (staus) in final stateswith two hadronically decayingτ-leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of139fb−1, recorded with the ATLAS detector at the LargeHadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected StandardModel background is observed. Limits are derived in scenarios of direct production of stau pairs with eachstau decaying into the stable lightest neutralino and oneτ-lepton in simplified models where the two staumass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidencelevel for a massless lightest neutralino

    Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

    Get PDF
    Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

    Wind-driven ventilation improvement with plan typology alteration: a CFD case study of traditional Turkish architecture

    Get PDF
    Aligned with achieving the goal of net-zero buildings, the implementation of energy-saving techniques in minimizing energy demands is proving more vital than at any time. As practical and economic options, passive strategies in ventilation developed over thousands of years have shown great potential for the reduction of residential energy demands, which are often underestimated in modern building’s construction. In particular, as a cost-effective passive strategy, wind-driven ventilation via windows has huge potential in the enhancement of the indoor air quality (IAQ) of buildings while simultaneously reducing their cooling load. This study aims to investigate the functionality and applicability of a common historical Turkish architectural element called “Cumba” to improve the wind-driven ventilation in modern buildings. A case study building with an archetypal plan and parameters was defined as a result of a survey over 111 existing traditional samples across Turkey. Buildings with and without Cumba were compared in different scenarios by the development of a validated CFD microclimate model. The results of simulations clearly demonstrate that Cumba can enhance the room’s ventilation rate by more than two times while harvesting wind from different directions. It was also found that a flexible window opening strategy can help to increase the mean ventilation rate by 276%. Moreover, the room’s mean air velocity and ventilation rate could be adjusted to a broad range of values with the existence of Cumba. Thus, this study presents important findings about the importance of plan typology in the effectiveness of wind-driven ventilation strategies in modern dwellings

    Potencial de economia de energia elétrica através do uso da luz natural e da ventilação híbrida em edifícios comerciais em Florianópolis

    Get PDF
    O objetivo deste estudo é estimar o potencial de economia de energia elétrica com o uso da luz natural integrada ao sistema de iluminação artificial e a utilização da ventilação híbrida em edifícios comerciais localizados em Florianópolis, SC. O trabalho foi baseado em simulações computacionais nos programas EnergyPlus e Daysim. Foram simulados modelos de ambientes de edificações comerciais, com três geometrias, três dimensões de sala por geometria, dez áreas de janela por modelo e quatro orientações. Os modelos foram examinados por meio de quatro estudos de caso. No Caso 1 (referência), a edificação opera com sistemas de iluminação e de condicionamento artificiais; no Caso 2, ocorre a integração da iluminação natural com a artificial, com condicionamento artificial; já no Caso 3, utilizam-se a ventilação híbrida e a iluminação artificial; no Caso 4, adotam-se a iluminação natural integrada com a artificial e a ventilação híbrida. Os consumos de eletricidade do Caso 1 foram comparados com os demais casos. Assim, foi estimado o potencial de economia de energia elétrica gerado pelo uso da luz natural e ventilação híbrida. Conclui-se que a utilização da iluminação natural e da ventilação híbrida em edificações comerciais localizadas em Florianópolis apresenta potencial de economia de energia elétrica de até 64,9% e que essas estratégias podem ser utilizadas para aumentar a eficiência energética desse tipo de edificação

    Measurement of exclusive pion pair production in proton–proton collisions at √s=7 TeV with the ATLAS detector

    Get PDF

    Constraints on Higgs boson properties using WW∗(→ eνμν) jj production in 36.1fb-1 of √s=13 TeV pp collisions with the ATLAS detector

    Get PDF
    This article presents the results of two studies of Higgs boson properties using the WW∗(→ eνμν) jj final state, based on a dataset corresponding to 36.1 fb - 1 of s=13 TeV proton–proton collisions recorded by the ATLAS experiment at the Large Hadron Collider. The first study targets Higgs boson production via gluon–gluon fusion and constrains the CP properties of the effective Higgs–gluon interaction. Using angular distributions and the overall rate, a value of tan (α) = 0.0 ± 0.4 (stat.) ± 0.3 (syst.) is obtained for the tangent of the mixing angle for CP-even and CP-odd contributions. The second study exploits the vector-boson fusion production mechanism to probe the Higgs boson couplings to longitudinally and transversely polarised W and Z bosons in both the production and the decay of the Higgs boson; these couplings have not been directly constrained previously. The polarisation-dependent coupling-strength scale factors are defined as the ratios of the measured polarisation-dependent coupling strengths to those predicted by the Standard Model, and are determined using rate and kinematic information to be aL=0.91-0.18+0.10(stat.)-0.17+0.09(syst.) and aT= 1.2 ± 0.4 (stat.)-0.3+0.2(syst.). These coupling strengths are translated into pseudo-observables, resulting in κVV=0.91-0.18+0.10(stat.)-0.17+0.09(syst.) and ϵVV=0.13-0.20+0.28 (stat.)-0.10+0.08(syst.). All results are consistent with the Standard Model predictions

    Measurements of top-quark pair differential and double-differential cross-sections in the \u2113 +jets channel with pp collisions at 1as=13 TeV using the ATLAS detector

    Get PDF
    corecore