Repeatability of reclaimed asphalt pavement as related to properties of bitumen

Material recycling is one of the best solution that support sustainability aspect and at the same time reduce the construction and material cost. One of the common method in bituminous recycling is using reclaimed asphalt pavement (RAP). Although usage of RAP in the pavement has been established, properties of bitumen after repeated recycling process is unclear. Bitumen was extracted from recommended recycled mixtures that had undergone through repeated recycling process. In this study, bitumen was assessed in three different ageing stages namely 0 Cycle, 1st Cycle and 2nd Cycle. 0 Cycle is the sample which extracted from fresh mixture (represents 100% fresh materials). 1st and 2nd Cycles represent the number of recycling process. Penetration, softening point and viscosity test were used to evaluate the properties of extracted bitumen. From the tests, the results indicate that repeated recycling process generally increased hardness of the bitumen. This result was proven with the reduction in penetration value and increased in softening point temperature. Furthermore, it was also discovered that multiple recycling stages reduced the mixture workability, which was demonstrated by the increment of viscosity value. Hence, recycling process without any rejuvenator is applicable up to certain levels only

Performance evaluation of asphalt micro surfacing - A review

In spite the fact that micro surfacing receives accolades by researchers of being the most cost-effective, environmentally friendly, and functionally viable pavement preventive maintenance amongst the various asphalt surface treatments (AST). However, there has not been a universally standardised mix design, acceptable material type, compatible polymer-binder combination, laboratory-field correlational performance tests, and its field dependency performance indicators. The requirements set by the International Slurry Surfacing Association (ISSA), Malaysian Jabatan Kerja Raya (JKR-public works department) and American Society for Testing and Materials (ASTM) are stated to be guides. This study brings to fore the challenges, methodologies adopted and successes recorded towards solving the aforementioned concerns by various researches globally from existing literatures with emphasis on material-type effects, mix design methodology, serviceability/environmental performance, incorporation of industrial wastes and emulsion-polymer compatibility amongst others in micro surfacing. Hence, the contents of relevant published journal articles, theses, academic and industrial reports published within the last two decades (1979 - 2019) that met the selection criteria aforementioned were critiqued. Result indicated improvement in key pavement surface functional performance parameters as a function of enhanced polymer(s) used in improving desired performance, type of aggregate and its gradation, pre-treatment condition and ultimately emulsion type. However, there is a lack of total consensus on the mix design, even though polymers are unanimously agreed by researchers to improve performance. Future advances in micro surfacing should focus on the use of industrial wastes, synthetic material and especially by-products from industrial processes

Acceptance of shari?ah-compliant precious metal-backed cryptocurrency as an alternative currency: an empirical validation of adoption of innovation theory

In the crypto world, there is a proverbial (and literal) gold rush now occurring. Currently, more than 37 gold-backed cryptocurrency companies have now emerged. Interestingly, some of them also claim to be Sharīʿah-compliant. Introducing precious metal-backed cryptocurrencies is perceived to be an innovation among global payment systems, hampered in part by lack of supporting empirical evidence. Therefore, this research investigates potential users' tendency to adopt a Sharīʿah-compliant precious metal-backed cryptocurrency. As such, this study adopts an extended adoption model, which consists of eight factors. Partial least squares structural equation modeling (PLS-SEM) analysis was conducted on data elicited from economic active residents in Klang Valley from questionnaires. Overall, it was found six out of the eight constructs specified to influence the adoption of precious metal-backed cryptocurrency were statistically significant where 54.5% of the variation in adoption of PMBC can be explained by the structure model provided by this research. It was also found 63.55% of the respondents are willing to adopt precious metal-backed cryptocurrency in their future transactions

Anticancer activity of a sub-fraction of dichloromethane extract of Strobilanthes crispus on human breast and prostate cancer cells in vitro

<p>Abstract</p> <p>Background</p> <p>The leaves of <it>Strobilanthes crispus </it>(<it>S. crispus</it>) which is native to the regions of Madagascar to the Malay Archipelago, are used in folk medicine for their antidiabetic, diuretic, anticancer and blood pressure lowering properties. Crude extracts of this plant have been found to be cytotoxic to human cancer cell lines and protective against chemically-induced hepatocarcinogenesis in rats. In this study, the cytotoxicity of various sub-fractions of dichloromethane extract isolated from the leaves of <it>S. crispus </it>was determined and the anticancer activity of one of the bioactive sub-fractions, SC/D-F9, was further analysed in breast and prostate cancer cell lines.</p> <p>Methods</p> <p>The dichloromethane extract of <it>S. crispus </it>was chromatographed on silica gel by flash column chromatography. The ability of the various sub-fractions obtained to induce cell death of MCF-7, MDA-MB-231, PC-3 and DU-145 cell lines was determined using the LDH assay. The dose-response effect and the EC₅₀values of the active sub-fraction, SC/D-F9, were determined. Apoptosis was detected using Annexin V antibody and propidium iodide staining and analysed by fluorescence microscopy and flow cytometry, while caspase 3/7 activity was detected using FLICA caspase inhibitor and analysed by fluorescence microscopy.</p> <p>Results</p> <p>Selected sub-fractions of the dichloromethane extract induced death of MCF-7, MDA-MB-231, PC-3 and DU-145 cells. The sub-fraction SC/D-F9, consistently killed breast and prostate cancer cell lines with low EC₅₀values but is non-cytotoxic to the normal breast epithelial cell line, MCF-10A. SC/D-F9 displayed relatively higher cytotoxicity compared to tamoxifen, paclitaxel, docetaxel and doxorubicin. Cell death induced by SC/D-F9 occurred via apoptosis with the involvement of caspase 3 and/or 7.</p> <p>Conclusions</p> <p>A dichloromethane sub-fraction of <it>S. crispus </it>displayed potent anticancer activities <it>in vitro </it>that can be further exploited for the development of a potential therapeutic anticancer agent.</p

Diminishing benefits of urban living for children and adolescents’ growth and development

Optimal growth and development in childhood and adolescence is crucial for lifelong health and well-being1–6. Here we used data from 2,325 population-based studies, with measurements of height and weight from 71 million participants, to report the height and body-mass index (BMI) of children and adolescents aged 5–19 years on the basis of rural and urban place of residence in 200 countries and territories from 1990 to 2020. In 1990, children and adolescents residing in cities were taller than their rural counterparts in all but a few high-income&nbsp;countries. By 2020, the urban height advantage became smaller in most countries, and in many high-income western countries it reversed into a small urban-based disadvantage. The exception was for boys in most countries in sub-Saharan Africa and in some countries in Oceania, south Asia and the region of central Asia, Middle East and north Africa. In these countries, successive cohorts of boys from rural places either did not gain height or possibly became shorter, and hence fell further behind their urban peers. The difference between the age-standardized mean BMI of children in urban and rural areas was &lt;1.1 kg m–2 in the vast majority of&nbsp;countries. Within this small range, BMI increased slightly more in cities than in rural areas, except in south Asia, sub-Saharan Africa and some countries in central and eastern Europe. Our results show that in much of the world, the growth and developmental advantages of living in cities have diminished in the twenty-first century, whereas in much of sub-Saharan Africa they have amplified

Height and body-mass index trajectories of school-aged children and adolescents from 1985 to 2019 in 200 countries and territories: a pooled analysis of 2181 population-based studies with 65 million participants

Summary Background Comparable global data on health and nutrition of school-aged children and adolescents are scarce. We aimed to estimate age trajectories and time trends in mean height and mean body-mass index (BMI), which measures weight gain beyond what is expected from height gain, for school-aged children and adolescents. Methods For this pooled analysis, we used a database of cardiometabolic risk factors collated by the Non-Communicable Disease Risk Factor Collaboration. We applied a Bayesian hierarchical model to estimate trends from 1985 to 2019 in mean height and mean BMI in 1-year age groups for ages 5–19 years. The model allowed for non-linear changes over time in mean height and mean BMI and for non-linear changes with age of children and adolescents, including periods of rapid growth during adolescence. Findings We pooled data from 2181 population-based studies, with measurements of height and weight in 65 million participants in 200 countries and territories. In 2019, we estimated a difference of 20 cm or higher in mean height of 19-year-old adolescents between countries with the tallest populations (the Netherlands, Montenegro, Estonia, and Bosnia and Herzegovina for boys; and the Netherlands, Montenegro, Denmark, and Iceland for girls) and those with the shortest populations (Timor-Leste, Laos, Solomon Islands, and Papua New Guinea for boys; and Guatemala, Bangladesh, Nepal, and Timor-Leste for girls). In the same year, the difference between the highest mean BMI (in Pacific island countries, Kuwait, Bahrain, The Bahamas, Chile, the USA, and New Zealand for both boys and girls and in South Africa for girls) and lowest mean BMI (in India, Bangladesh, Timor-Leste, Ethiopia, and Chad for boys and girls; and in Japan and Romania for girls) was approximately 9–10 kg/m2. In some countries, children aged 5 years started with healthier height or BMI than the global median and, in some cases, as healthy as the best performing countries, but they became progressively less healthy compared with their comparators as they grew older by not growing as tall (eg, boys in Austria and Barbados, and girls in Belgium and Puerto Rico) or gaining too much weight for their height (eg, girls and boys in Kuwait, Bahrain, Fiji, Jamaica, and Mexico; and girls in South Africa and New Zealand). In other countries, growing children overtook the height of their comparators (eg, Latvia, Czech Republic, Morocco, and Iran) or curbed their weight gain (eg, Italy, France, and Croatia) in late childhood and adolescence. When changes in both height and BMI were considered, girls in South Korea, Vietnam, Saudi Arabia, Turkey, and some central Asian countries (eg, Armenia and Azerbaijan), and boys in central and western Europe (eg, Portugal, Denmark, Poland, and Montenegro) had the healthiest changes in anthropometric status over the past 3·5 decades because, compared with children and adolescents in other countries, they had a much larger gain in height than they did in BMI. The unhealthiest changes—gaining too little height, too much weight for their height compared with children in other countries, or both—occurred in many countries in sub-Saharan Africa, New Zealand, and the USA for boys and girls; in Malaysia and some Pacific island nations for boys; and in Mexico for girls. Interpretation The height and BMI trajectories over age and time of school-aged children and adolescents are highly variable across countries, which indicates heterogeneous nutritional quality and lifelong health advantages and risks

Global variation in diabetes diagnosis and prevalence based on fasting glucose and hemoglobin A1c

Fasting plasma glucose (FPG) and hemoglobin A1c (HbA1c) are both used to diagnose diabetes, but these measurements can identify different people as having diabetes. We used data from 117 population-based studies and quantified, in different world regions, the prevalence of diagnosed diabetes, and whether those who were previously undiagnosed and detected as having diabetes in survey screening, had elevated FPG, HbA1c or both. We developed prediction equations for estimating the probability that a person without previously diagnosed diabetes, and at a specific level of FPG, had elevated HbA1c, and vice versa. The age-standardized proportion of diabetes that was previously undiagnosed and detected in survey screening ranged from 30% in the high-income western region to 66% in south Asia. Among those with screen-detected diabetes with either test, the age-standardized proportion who had elevated levels of both FPG and HbA1c was 29-39% across regions; the remainder had discordant elevation of FPG or HbA1c. In most low- and middle-income regions, isolated elevated HbA1c was more common than isolated elevated FPG. In these regions, the use of FPG alone may delay diabetes diagnosis and underestimate diabetes prevalence. Our prediction equations help allocate finite resources for measuring HbA1c to reduce the global shortfall in diabetes diagnosis and surveillance