Techno-economic analysis of geopolymer production from the coal fly ash with high iron oxide and calcium oxide contents

In this work, we firstly examined the technical feasibility of geopolymer synthesis from the coal fly ash with high iron oxide (48.84 wt.%) and calcium oxide (22.15 wt.%) contents. The heat resistance of geopolymer was represented by the dry weight loss which ranged from 2.5 to 4.9% and was better than that (11.7%) of OPC. However, the high iron oxide content made the acid resistance (13–14%) of geopolymer inferior to OPC. The economics of geopolymer production changes significantly upon the variation in the arrangement of material use and geopolymer price. The costs of Na2SiO3 and NaOH and the benefit of geopolymer selling were the major factors affecting the economic feasibility of geopolymer production. When the Na2SiO3 price was around 400 USD/ton, the geopolymer production will be profitable even if the geopolymer price was as low as 50 USD/ton. It is possible to improve the economics of geopolymer production by varying the arrangement of material use while not impairing the performance of geopolymer

A catalytic hollow fibre membrane reactor for combined steam methane reforming and water gas shift reaction

A catalytic hollow fibre membrane reactor (CHFMR) was developed in this study for combined steam methane reforming (SMR) and water gas shift (WGS) reaction. This is achieved by incorporating a Ni/SBA-15 catalyst into a plurality of micro-channels with open entrance from inner surface of Al2O3 hollow fibres, followed by coating of a 3.3μm Pd membrane on the outer surface of the hollow fibre using an electroless plating method. In addition to systematic characterizations of each reactor component, i.e. Ni/SBA-15 catalyst, micro-structured ceramic hollow fibre and Pd separating layer, the effect of how the reactor was assembled or fabricated on the catalytic performance was evaluated. Electroless plating of the Pd membrane impaired the catalytic performance of the deposited Ni/SBA-15 catalyst. Also, the over-removal of hydrogen from the reaction zone was considered as the main reason for the deactivation of the Ni-based catalyst. Instead of mitigating such deactivation using "compensating" hydrogen, starting the reaction at higher temperatures was found more efficient in improving the reactor performance, due to a better match between hydrogen production (from the reaction) and hydrogen removal (from the Pd membrane). An effective methane conversion of approximately 53%, a CO2 selectivity of 94% and a H2 recovery of 43% can be achieved at 560°C. In order for a more significant "shift" phenomenon, alternative methodology of fabricating the reactor and more coke resistant catalysts are recommended

A Sweet Killer: Mesoporous Polysaccharide Confined Silver Nanoparticles for Antibacterial Applications

Silver nanoparticles (AgNP) confined within porous starch have been prepared in a simple, green and efficient manner, utilising the nanoporous structure of predominantly mesoporous starch (MS) to act as nanoparticle stabiliser, support and reducing surface. MS/AgNP materials present high surface areas (SBET > 150 m2 g−1) and mesopore volumes (Vmeso > 0.45 cm3 g−1). The interaction of the AgNP precursor and forming nanoparticle nuclei with the mesoporous domains of the porous polysaccharide, direct porosity to increasingly narrower and more defined pore size distributions, indicative of a degree of cooperative assembly. Transmission electron microscopy images indicated the presence of spherical AgNP of a size reflective of the porous polysaccharide mesopore diameter (e.g., 5–25 nm), whilst XPS analysis confirmed the metallic Ag0 state. Materials were prepared at relatively low Ag loadings (<0.18 mmol g−1), demonstrating excellent antimicrobial activity in solid and liquid phase testing against Gram negative (E. coli) and positive (S. aureus) model bacteria. The resulting materials are biocompatible and present a useful solid porous carbohydrate-based polymer vehicle to control the AgNP size regime and facilitate transference to a biological environment

Effect of particle size on silver nanoparticle deposition onto dielectric barrier discharge (DBD) plasma functionalized polyamide fabric

The effect on the deposition of three different size silver nanoparticles (AgNPs) onto a polyamide 6,6 (PA) fabric pre-treated using air dielectric barrier discharge (DBD) plasma was investigated. The SEM, EDS, and XPS analysis confirm that the smaller is the diameter of AgNPs, the higher the amount of adsorbed NPs on the PA. The DBD treatment on PA induces a threefold increase in Ag adsorption. The result confirms a dual effect on the wettability of the plasma treated PA substrate. AgNPs slightly enhance hydrophobicity of the PA surface and, at the same time, protect it against the plasma aging effect. The effect on the deposition of three different size silver nanoparticles (AgNPs) onto a Polyamide 6,6 (PA) fabric pre-treated using air dielectric barrier discharge (DBD) plasma was investigated. The smaller is the size, the higher the loaded AgNPs. The DBD treatment induces a threefold increase in Ag adsorption. AgNPs enhance hydrophobicity of the PA surface and reduce the plasma aging effect.Fundação para a Ciência e a Tecnologia (FCT

Scalable synthesis of robust and stretchable composite wound dressings by dispersing silver nanowires in continuous bacterial cellulose

"Available online 31 July 2020"While silver nanoparticles are widely used to endow materials with antibacterial activity, silver nanowires (AgNWs) have not attracted much attention. Herein, the composites of bacterial cellulose (BC) and AgNWs were prepared through a novel step-by-step in situ biosynthesis which retains the three-dimensional network of BC. The results of water vapor permeability, water uptake rate, and water retention rate showed that the BC/AgNW wound dressings could absorb wound skin exudates and maintain moisture environments. Furthermore, the BC/AgNW dressings were robust and stretchable. More importantly, the BC/AgNW dressings exhibited sustained release of Ag+. The results from animal tests indicated that the BC/AgNW dressing with 38.4 wt% AgNWs exhibited higher expression levels of cytokeratin-10 and integrin-β4, greater proliferation of keratinocytes and formation of epithelial tissues and greatly improved skin regeneration over the bare BC. We propose that the integrated nanofibrous structure and the excellent and sustained antibacterial activity of AgNWs are responsible for the excellent in vivo wound healing ability and biocompatibility. These results suggest that the BC/AgNW composites have promising application as wound dressings.Y. Wan, S. Yang, and J. Wang contributed equally to this work, which was funded by the National Natural Science Foundation of China (Grant nos. 31870963, 51973058) and the Provincial Key Research and Development Program of Jiangxi (No. 20192ACB80008).info:eu-repo/semantics/publishedVersio

Synthesis of poly (3-hydroxybutyrate-co-4 hydroxybutyrate)/chitosan/silver nanocomposite material with enhanced antimicrobial activity

This work aims to shed light in the fabrication of poly(3-hydroxybutyrate-co-44%-4-hydroxybutyrate)[P(3HB-co-44%4HB)]/chitosan-based silver nanocomposite material using different contents of silver nanoparticle (SNP); 1-9 wt%. Two approaches were applied in the fabrication; namely solvent casting and chemical crosslinking via glutaraldehyde (GA). A detailed characterization was conducted in order to yield information regarding the nanocomposite material. X-ray diffraction analysis exhibited the nature of the three components that exist in the nanocomposite films: P(3HB-co-4HB), chitosan, and SNP. In term of mechanical properties, tensile strength, and elongation at break were significantly improved up to 125% and 22%, respectively with the impregnation of the SNP. The melting temperature of the nanocomposite materials was increased whereas their thermal stability was slightly changed. Scanning electron microscopy images revealed that incorporation of 9 wt% of SNP caused agglomeration but the surface roughness of the material was significantly improved with the loading. Staphylococcus aureus and Escherichia coli were completely inhibited by the nanocomposite films with 7 and 9 wt% of SNP, respectively. On the other hand, degradation of the nanocomposite materials outweighed the degradation of the pure copolymer. These bioactive and biodegradable materials stand a good chance to serve the vast need of biomedical applications namely management and care of wound as wound dressing

Plasma treatment in textile industry

Plasma technology applied to textiles is a dry, environmentally- and worker-friendly method to achieve surface alteration without modifying the bulk properties of different materials. In particular, atmospheric non-thermal plasmas are suited because most textile materials are heat sensitive polymers and applicable in a continuous processes. In the last years plasma technology has become a very active, high growth research field, assuming a great importance among all available material surface modifications in textile industry. The main objective of this review is to provide a critical update on the current state of art relating plasma technologies applied to textile industryFernando Oliveira (SFRH/BD/65254/2009) acknowledges Fundacao para a Cioncia e Tecnologia, Portugal, for its doctoral grant financial support. Andrea Zille (C2011-UMINHO-2C2T-01) acknowledges funding from Programa Compromisso para a Cioncia 2008, Portugal

The Production and Application of Hydrogels for Wound Management: A Review

Wound treatment has increased in importance in the wound care sector due to the pervasiveness of chronic wounds in the high-risk population including, but not limited to, geriatric population, immunocompromised and obese patients. Furthermore, the number of people diagnosed with diabetes is rapidly growing. According to the World Health Organization (WHO), the global diabetic occurrence has increased from 4.7 in 1980 to 8.5 in 2014. As diabetes becomes a common medical condition, it has also become one of the major causes of chronic wounds which require specialised care to address patients’ unique needs. Wound dressings play a vital role in the wound healing process as they protect the wound site from the external environment. They are also capable of interacting with the wound bed in order to facilitate and accelerate the healing process. Advanced dressings such as hydrogels are designed to maintain a moist environment at the site of application and due to high water content are ideal candidates for wound management. Hydrogels can be used for both exudating or dry necrotic wounds. Additionally, hydrogels also demonstrate other unique features such as softness, malleability and biocompatibility. Nowadays, advanced wound care products make up around 7.1 billion of the global market and their production is growing at an annual rate of 8.3 with the market projected to be worth 12.5 billion by 2022. The presented review focuses on novel hydrogel wound dressings, their main characteristics and their wound management applications. It also describes recent methodologies used for their production and the future potential developments

Paper pulp-based adsorbents for the removal of pharmaceuticals from wastewater: A novel approach towards diversification

In this work, two pulps, bleached (BP) and raw pulp (RP), derived from the paper production process, were used as precursors of non-activated and activated carbons (ACs). In the case of non-ACs, the production involved either pyrolysis or pyrolysis followed by acid washing. For ACs production, the pulps were impregnated with K2CO3 or H3PO4, and then pyrolysed and acid washed. After production, the materials were physically and chemically characterized. Then, batch adsorption tests on the removal of two pharmaceuticals (the anti-epileptic carbamazepine (CBZ) and the antibiotic sulfamethoxazole (SMX)) from ultra-pure water and from Waste Water Treatment Plant (WWTP) effluents were performed. In ultra-pure water, non-ACs were not able to adsorb CBZ or SMX while ACs showed good adsorption capacities. In WWTP effluents, although ACs satisfactorily adsorbed CBZ and SMX, they showed lower adsorption capacities for the latter. Tests with WWTP effluents revealed that the best adsorption capacities were achieved by carbons produced from BP and activated with H3PO4: 92±19mgg-1 for CBZ and 13.0±0.6mgg-1 for SMX. These results indicate the potential of paper pulps as precursors for ACs that can be applied in wastewater treatment.publishe

DEVELOPMENT OF CATALYTIC MEMBRANE REACTOR FOR PURE HYDROGEN PRODUCTION VIA CATALYTIC DECOMPOSITION OF METHANE

Ph.DDOCTOR OF PHILOSOPH