Ligand-Free Palladium-Catalyzed Oxyarylation of Dihydronaphthal­enes and Chromenequinone with o-Iodophenols and 3-Iodolawsone in PEG-400: An Efficient Synthesis of 5-Carbapterocarpans and Pterocarpanquinones

Dihydronaphthalenes were oxyarylated with o-iodophenols, in PEG-400 at 140 or 170 °C, leading regio- and stereoselectively to 5-carbapterocarpans. By using Pd(OAc)2 (5–10 mol%) as precatalyst and Ag2CO3 (1.1 equiv) as base (conditions A), products were obtained in good to excellent chemical yields, in 5–30 minutes, irrespective of the pattern of substitution the starting materials. Alternatively, when p-hydroxyacetophenone oxime derived palladacycle (1 mol%) was used as precatalyst, and dicyclohexylamine (2 equiv) was used as base (silver-free, conditions B), the corresponding adducts were obtained in moderate to good yields, in 0.5 to 4 hours. Finally, the oxyarylation of dihydronaphthalenes­ and chromenquinone with o-iodophenols and 3-iodolawsone in PEG-400 under conditions A led regio- and stereoselectively to the formation of carbapterocarpanquinones and pterocarpanquinones in moderate yield.Financial support from Brazilian agencies CAPES-DGU (Project 200/09), CNPq, FAPERJ and UFRJ are acknowledged. Spanish MICINN (Projects PHB2008-0037-PC, CTQ2007-62771/BQU, CTQ2010-20387, Consolider INGENIO 2010 CSD2007-00006), FEDER, Generalitat Valenciana (Project PROMETEO/2009/038), and the University of Alicante are acknowledged

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Small-scale gold mining and the COVID-19 pandemic: Conflict and cooperation in the Brazilian Amazon

The COVID-19 pandemic exposes both conflict and cooperation in artisanal and small-scale gold mining in the Brazilian Amazon. Reporting on the experiences of artisanal and small-scale gold miners (garimpeiros, in Brazilian Portuguese), we show how, on the one hand, the pandemic challenges an already precarious working system that could lead garimpeiros, often invisible to public policies, to positions of further vulnerability; and, on the other hand, highlights the capacity of garimpeiros to self-organize and navigate the difficulties by finding alternative solutions to cope with the crisis. This leads us to argue that emerging strategies of cooperation, related to self-organization and communication channels have the potential to provide experiences useful for processes of conflict transformation in the post-crisis. We acknowledge that much depends on the severity of the crisis and its manifestations in the region; nevertheless, the potential for constructive outcomes from the crisis should not be disregarded

Optical And Esr Study Of Er3+ In Linbo3

We report laser-excited optical transitions between the 4S3/2 and 4I15/2 multiplets of Er3+ as an impurity in the LiNbO3 host, together with the optical-absorption spectra at liquid-helium and liquid-nitrogen temperatures. The optical data allow us to determine the crystal-field splittings of those levels and the spin-Hamiltonian parameters for the 4I15/2 lower multiplet. The observed electron-spin resonance and the angular variation of this spectrum agree with the parameters obtained by optical techniques. Both techniques show that only one of the three possible trigonal sites in LiNbO3 is occupied by Er3+ within the experimental sensitivity, in agreement with recent x-ray standing-wave measurements. © 1995 The American Physical Society.5153206320

Effect Of Etching Time And Light Source On The Bond Strength Of Metallic Brackets To Ceramic

This study evaluated the bond strength of brackets to ceramic testing different etching times and light sources for photo-activation of the bonding agent. Cylinders of feldspathic ceramic were etched with 10% hydrofluoric acid for 20 or 60 s. After application of silane on the ceramic surface, metallic brackets were bonded to the cylinders using Transbond XT (3M Unitek). The specimens for each etching time were assigned to 4 groups (n=15), according to the light source: XL2500 halogen light, UltraLume 5 LED, AccuCure 3000 argon laser, and Apollo 95E plasma arc. Light-activation was carried out with total exposure times of 40, 40, 20 and 12 s, respectively. Shear strength testing was carried out after 24 h. The adhesive remnant index (ARI) was evaluated under magnification. Data were subjected to two-way ANOVA and Tukey's test (α=0.05). Specimens etched for 20 s presented significantly lower bond strength (p0.05) were detected among the light sources. The ARI showed a predominance of scores 0 in all groups, with an increase in scores 1, 2 and 3 for the 60 s time. In conclusion, only the etching time had significant influence on the bond strength of brackets to ceramic.223245248Barghi, N., Fischer, D.E., Vatani, L., Effects of porcelain leucite content, types of etchants, and etching time on porcelaincomposite bond (2006) J Esthet Restor Dent, 18, pp. 47-52Nagayassu, M.P., Shintome, L.K., Uemura, E.S., Araújo, J.E., Effect of surface treatment on the shear bond strength of a resin-based cement to porcelain (2006) Braz Dent J, 17, pp. 290-295Shimada, Y., Yamaguchi, S., Tagami, J., Micro-shear bond strength of dual-cured resin cement to glass ceramics (2002) Dent Mater, 18, pp. 380-388Chen, J.H., Matsumura, H., Atsuta, M., Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain (1998) J Dent, 26, pp. 53-58Guler, A.U., Yilmaz, F., Yenisey, M., Guler, E., Ural, C., Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain (2006) J Adhes Dent, 8, pp. 21-25Kasuya, K., Miyazaki, Y., Ogawa, N., Maki, K., Manabe, A., Itoh, K., Efficacy of experimental dual-cure resin cement for orthodontic direct bond system (2006) Orthod Waves, 65, pp. 107-111Meguro, D., Hayakawa, T., Kasai, K., Efficacy of using orthodontic adhesive resin in bonding and debonding characteristics of a calcium phosphate ceramic bracket (2006) Orthod Waves, 65, pp. 148-154Dall'igna, C.M., Marchioro, E.M., Spohr, A.M., Mota, E.G., Effect of curing time on the bond strength of a bracket-bonding system cured with a light-emitting diode or plasma arc light (2011) Eur J Orthod, 33, pp. 55-59Correr, A.B., Sinhoreti, M.A., Sobrinho, L.C., Tango, R.N., Schneider, L.F., Consani, S., Effect of the increase of energy density on Knoop hardness of dental composites light-cured by conventional QTH, LED and xenon plasma arc (2005) Braz Dent J, 16, pp. 218-224Cekic-Nagas, I., Egilmez, F., Ergun, G., The effect of irradiation distance on microhardness of resin composites cured with different light curing units (2010) Eur J Dent, 4, pp. 440-446Thind, B.S., Stirrups, D.R., Lloyd, C.H., A comparison of tungstenquartz- halogen, plasma arc and light-emitting diode light sources for the polymerization of an orthodontic adhesive (2006) Eur J Orthod, 28, pp. 78-82Filipov, I.A., Vladimirov, S.B., Residual monomer in a composite resin after light-curing with different sources, light intensities and spectra of radiation (2006) Braz Dent J, 17, pp. 34-38Park, J.K., Hur, B., Ko, C.C., García-Godoy, F., Kim, H.I., Kwon, Y.H., Effect of light-curing units on the thermal expansion of resin nanocomposites (2010) Am J Dent, 23, pp. 331-334Price, R.B., Labrie, D., Rueggeberg, F.A., Felix, C.M., Irraciance differences in the violet (405 nm) and blue (460 nm) spectral ranges among dental light-curing units (2010) J Esthet Restor Dent, 22, pp. 363-377Yen, T.W., Blackman, R.B., Baez, R.J., Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic (1993) J Prosthet Dent, 70, pp. 224-233Reynolds, I.R., Composite filling materials as adhesives in orthodontics (1975) Br Dent J, 138, p. 83Rueggeberg, F., Contemporary issues in photocuring (1999) Compend Contin Educ Dent, (SUPPL.), pp. 4-15Olsen, M.E., Bishara, S.E., Boyer, D.B., Jakobsen, J.R., Effect of varying etching times on the bond strength of ceramic brackets (1996) Am J Orthod Dentofacial Orthop, 109, pp. 403-409Sant'anna, E.F., Monnerat, M.E., Chevitarese, O., Stuani, M.B., Bonding brackets to porcelain - in vitro study (2002) Braz Dent J, 3, pp. 191-196Canay, S., Hersek, N., Ertan, A., Effect of different acid treatments on a porcelain surface (2001) J Oral Rehabil, 28, pp. 95-10

Search for supersymmetry in final states with jets, missing transverse momentum and one isolated lepton in sqrt{s} = 7 TeV pp collisions using 1 fb-1 of ATLAS data

We present an update of a search for supersymmetry in final states containing jets, missing transverse momentum, and one isolated electron or muon, using 1.04 fb^-1 of proton-proton collision data at sqrt{s} = 7 TeV recorded by the ATLAS experiment at the LHC in the first half of 2011. The analysis is carried out in four distinct signal regions with either three or four jets and variations on the (missing) transverse momentum cuts, resulting in optimized limits for various supersymmetry models. No excess above the standard model background expectation is observed. Limits are set on the visible cross-section of new physics within the kinematic requirements of the search. The results are interpreted as limits on the parameters of the minimal supergravity framework, limits on cross-sections of simplified models with specific squark and gluino decay modes, and limits on parameters of a model with bilinear R-parity violation.Comment: 18 pages plus author list (30 pages total), 9 figures, 4 tables, final version to appear in Physical Review

Reducing heterotic M-theory to five dimensional supergravity on a manifold with boundary

This paper constructs the reduction of heterotic $M$-theory in eleven dimensions to a supergravity model on a manifold with boundary in five dimensions using a Calabi-Yau three-fold. New results are presented for the boundary terms in the action and for the boundary conditions on the bulk fields. Some general features of dualisation on a manifold with boundary are used to explain the origin of some topological terms in the action. The effect of gaugino condensation on the fermion boundary conditions leads to a `twist' in the chirality of the gravitino which can provide an uplifting mechanism in the vacuum energy to cancel the cosmological constant after moduli stabilisation.Comment: 16 pages, RevTe

Measurement of tau polarization in W->taunu decays with the ATLAS detector in pp collisions at sqrt(s) = 7 TeV

In this paper, a measurement of tau polarization in W->taunu decays is presented. It is measured from the energies of the decay products in hadronic tau decays with a single final state charged particle. The data, corresponding to an integrated luminosity of 24 pb^-1, were collected by the ATLAS experiment at the Large Hadron Collider in 2010. The measured value of the tau polarization is Ptau = -1.06 +/- 0.04 (stat) + 0.05 (syst) - 0.07 (syst), in agreement with the Standard Model prediction, and is consistent with a physically allowed 95% CL interval [-1,-0.91]. Measurements of tau polarization have not previously been made at hadron colliders.Comment: 10 pages plus author list (25 pages total), 4 figures, 4 tables, revised author list, matches published EPJC versio