High throughput genomic sequencing of bioaerosols in broiler chicken production facilities

Chronic inhalation exposure to agricultural dust promotes the development of chronic respiratory diseases among poultry workers. Poultry dust is composed of dander, chicken feed, litter bedding and microbes. However, the microbial composition and abundance has not been fully elucidated. Genomic DNA was extracted from settled dust and personal inhalable dust collected while performing litter sampling or mortality collection tasks. DNA libraries were sequenced using a paired-end sequencing-by-synthesis approach on an Illumina HiSeq 2500. Sequencing data showed that poultry dust is predominantly composed of bacteria (64–67%) with a small quantity of avian, human and feed DNA (\u3c 2% of total reads). Staphylococcus sp. AL1, Salinicoccus carnicancri and Lactobacillus crispatus were the most abundant bacterial species in personal exposure samples of inhalable dust. Settled dust had a moderate relative abundance of these species as well as Staphylococcus lentus and Lactobacillus salivarius. There was a statistical difference between the microbial composition of aerosolized and settled dust. Unlike settled dust composition, aerosolized dust composition had little variance between samples. These data provide an extensive analysis of the microbial composition and relative abundance in personal inhalable poultry dust and settled poultry dust

Effectiveness of telephone-based interventions for managing osteoarthritis and spinal pain: a systematic review and meta-analysis

Background Osteoarthritis and spinal pain are common and burdensome conditions; however, the majority of patients with these conditions do not receive care that is consistent with clinical practice guidelines. Telehealth models of care have the potential to improve care for osteoarthritis and spinal pain patients. The aim of this review was to assess the effectiveness of verbal real-time telehealth interventions, including telephone-based and videoconferencing interventions to reduce pain intensity and disability in patients with osteoarthritis of the knee or hip and spinal pain (back or neck pain). Methods We searched seven electronic databases from inception to May 2018. Randomised controlled trials (RCTs), cluster-RCTs, and non-randomised controlled trials were included. Two review authors independently extracted data for each included study. Primary outcomes were pain intensity and disability. We conducted primary meta-analyses combining all conditions with similar interventions and comparators. Standardised mean difference (SMD) and 95% confidence intervals (CIs) were calculated using random effects models. We used the Cochrane Risk of Bias tool to assess risk of bias, and GRADE to evaluate the quality of evidence. Results We included 23 studies with 56 trial arms and 4,994 participants. All studies utilised telephone-based interventions. Only two studies used a telephone only approach and the remainder included educational materials and/or face-to-face components. We found no studies utilising videoconferencing. Meta-analysis showed telephone-based interventions (with educational materials) for osteoarthritis and spinal pain improved pain intensity (n = 5 trials, n = 1,357 participants, SMD −0.27, 95% CI [−0.53, −0.01], Tau2 = 0.06, I2 = 74%; moderate-quality evidence) and disability (n = 7 trials, n = 1,537 participants, SMD −0.21, 95% CI [−0.40, −0.02], Tau2 = 0.03, I2 = 56%; moderate-quality evidence) compared to usual care. Meta-analyses found telephone with face-to-face interventions does not improve pain and disability compared to usual care or face-to-face care alone. Discussion We are moderately confident that telephone-based interventions reduce pain intensity and disability in patients with osteoarthritis and spinal pain compared to usual care, but telephone plus face-to-face interventions are no more effective than usual care or face-to-face interventions alone

Impact of fly ash content and fly ash transportation distance on embodied greenhouse gas emissions and water consumption in concrete

Background, aim and scope Fly ash, a by-product of coal-fired power stations, is substituted for Portland cement to improve the properties of concrete and reduce the embodied greenhouse gas (GHG) emissions. Much of the world's fly ash is currently disposed of as a waste product. While replacing some Portland cement with fly ash can reduce production costs and the embodied emissions of concrete, the relationship between fly ash content and embodied GHG emissions in concrete has not been quantified. The impact of fly ash content on embodied water is also unknown. Furthermore, it is not known whether a global trade in fly ash for use in concrete is feasible from a carbon balance perspective, or if transport over long distances would eliminate any CO(2) savings. This paper aims to quantify GHG emissions and water embodied in concrete (f'(c)= 32 MPa) as a function of fly ash content and to determine the critical fly ash transportation distance, beyond which use of fly ash in concrete increases embodied GHG emissions

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Measurement of the flavour composition of dijet events in pp collisions at root s=7 TeV with the ATLAS detector

This paper describes a measurement of the flavour composition of dijet events produced in pp collisions at √s=7 TeV using the ATLAS detector. The measurement uses the full 2010 data sample, corresponding to an integrated luminosity of 39 pb−1. Six possible combinations of light, charm and bottom jets are identified in the dijet events, where the jet flavour is defined by the presence of bottom, charm or solely light flavour hadrons in the jet. Kinematic variables, based on the properties of displaced decay vertices and optimised for jet flavour identification, are used in a multidimensional template fit to measure the fractions of these dijet flavour states as functions of the leading jet transverse momentum in the range 40 GeV to 500 GeV and jet rapidity |y|<2.1. The fit results agree with the predictions of leading- and next-to-leading-order calculations, with the exception of the dijet fraction composed of bottom and light flavour jets, which is underestimated by all models at large transverse jet momenta. The ability to identify jets containing two b-hadrons, originating from e.g. gluon splitting, is demonstrated. The difference between bottom jet production rates in leading and subleading jets is consistent with the next-to-leading-order predictions

Evidence for the Higgs-boson Yukawa coupling to tau leptons with the ATLAS detector

Results of a search for H → τ τ decays are presented, based on the full set of proton-proton collision data recorded by the ATLAS experiment at the LHC during 2011 and 2012. The data correspond to integrated luminosities of 4.5 fb−1 and 20.3 fb−1 at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV respectively. All combinations of leptonic (τ → `νν¯ with ` = e, µ) and hadronic (τ → hadrons ν) tau decays are considered. An excess of events over the expected background from other Standard Model processes is found with an observed (expected) significance of 4.5 (3.4) standard deviations. This excess provides evidence for the direct coupling of the recently discovered Higgs boson to fermions. The measured signal strength, normalised to the Standard Model expectation, of µ = 1.43 +0.43 −0.37 is consistent with the predicted Yukawa coupling strength in the Standard Model