Functional recovery after treatment of extra-articular distal radius fractures in the elderly using the IlluminOss® System (IO-Wrist); A multicenter prospective observational study

Background: Approximately 17 % of all fractures involve the distal radius. Two-thirds require reduction due to displacement. High redislocation rates and functional disability remain a significant problem after non-operative treatment, with up to 30 % of patients suffering long-term functional restrictions. Whether operative correction is superior to non-operative treatment with respect to functional outcome has not unequivocally been confirmed. The IlluminOss® System was introduced in 2009 as a novel, patient-specific, and minimally invasive intramedullary fracture fixation. This minimally invasive technique has a much lower risk of iatrogenic soft tissue complications. Because IlluminOss® allows for early mobilization, it may theoretically lead to earlier functional recovery and ADL independence than non-operative immobilization. The main aim of this study is to examine outcome in elderly patients who sustained a unilateral, displaced, extra-articular distal radius fracture that was treated with IlluminOss®. Methods/design: The design of the study will be a multicenter, prospective, observational study (case series). The study population comprises elderly (60 years or older; independent in activities of daily living) with a unilateral, displaced, extra-articular distal radius fracture (AO/OTA type 23-A2 and A3) that after successful closed reduction was fixed within 2 weeks after the injury with IlluminOss®. Critical elements of treatment will be registered, and outcome will be monitored until 1 year after surgery. The Disabilities of the Arm, Shoulder, and Hand score will serve as primary outcome measure. The Patient-Rated Wrist Evaluation score, level of pain, health-related quality of life (Short Form-36 and EuroQoL-5D), time to ADL independence, time to activities/work resumption, range of motion of the wrist, radiological outcome, and complications are secondary outcome measures. Health care consumption and lost productivity will be used for a cost analysis. The cost analysis will be performed from a societal perspective. Descriptive data will be r

Early mobilisation versus plaster immobilisation of simple elbow dislocations: Results of the FuncSiE multicentre randomised clinical trial

Background/aim To compare outcome of early mobilisation and plaster immobilisation in patients with a simple elbow dislocation. We hypothesised that early mobilisation would result in earlier functional recovery. Methods From August 2009 to September 2012, 100 adult patients with a simple elbow dislocation were enrolled in this multicentre randomised controlled trial. Patients were randomised to early mobilisation (n=48) or 3 weeks plaster immobilisation (n=52). Primary outcome measure was the Quick Disabilities of the Arm, Shoulder, and Hand (Quick-DASH) score. Secondary outcomes were the Oxford Elbow Score, Mayo Elbow Performance Index, pain, range of motion, complications and activity resumption. Patients were followed for 1 year. Results Quick-DASH scores at 1 year were 4.0 (95% CI 0.9 to 7.1) points in the early mobilisation group versus 4.2 (95% CI 1.2 to 7.2) in the plaster immobilisation group. At 6 weeks, early mobilised patients reported less disability (Quick-DASH 12 (95% CI 9 to 15) points vs 19 (95% CI 16 to 22); p<0.05) and had a larger arc of flexion and extension (121° (95% CI 115° to 127°) vs 102° (95% CI 96° to 108°); p<0.05). Patients returned to work sooner after early mobilisation (10 vs 18 days; p=0.020). Complications occurred in 12 patients; this was unrelated to treatment. No recurrent dislocations occurred. Conclusions Early active mobilisation is a safe and effective treatment for simple elbow dislocations. Patients recovered faster and returned to work earlier without increasing the complication rate. No evidence was found supporting treatment benefit at 1 year

HUMeral Shaft Fractures: MEasuring Recovery after Operative versus Non-operative Treatment (HUMMER): A multicenter comparative observational study

Background: Fractures of the humeral shaft are associated with a profound temporary (and in the elderly sometimes even permanent) impairment of independence and quality of life. These fractures can be treated operatively or non-operatively, but the optimal tailored treatment is an unresolved problem. As no high-quality comparative randomized or observational studies are available, a recent Cochrane review concluded there is no evidence of sufficient scientific quality available to inform the decision to operate or not. Since randomized controlled trials for this injury have shown feasibility issues, this study is designed to provide the best achievable evidence to answer this unresolved problem. The primary aim of this study is to evaluate functional recovery after operative versus non-operative treatment in adult patients who sustained a humeral shaft fracture. Secondary aims include the effect of treatment on pain, complications, generic health-related quality of life, time to resumption of activities of daily living and work, and cost-effectiveness. The main hypothesis is that operative treatment will result in faster recovery. Methods/design. The design of the study will be a multicenter prospective observational study of 400 patients who have sustained a humeral shaft fracture, AO type 12A or 12B. Treatment decision (i.e., operative or non-operative) will be left to the discretion of the treating surgeon. Critical elements of treatment will be registered and outcome will be monitored at regular intervals over the subsequent 12 months. The primary outcome measure is the Disabilities of the Arm, Shoulder, and Hand score. Secondary outcome measures are the Constant score, pain level at both sides, range of motion of the elbow and shoulder joint at both sides, radiographic healing, rate of complications and (secondary) interventions, health-related quality of life (Short-Form 36 and EuroQol-5D), time to resumption of ADL/work, and cost-effectiveness. Data will be analyzed using univariate and multivariable analyses (including mixed effects regression analysis). The cost-effectiveness analysis will be performed from a societal perspective. Discussion. Successful completion of this trial will provide evidence on the effectiveness of operative versus non-operative treatment of patients with a humeral shaft fracture. Trial registration. The trial is registered at the Netherlands Trial Register (NTR3617)

Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC

A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions

Search for H→γγ produced in association with top quarks and constraints on the Yukawa coupling between the top quark and the Higgs boson using data taken at 7 TeV and 8 TeV with the ATLAS detector

A search is performed for Higgs bosons produced in association with top quarks using the diphoton decay mode of the Higgs boson. Selection requirements are optimized separately for leptonic and fully hadronic final states from the top quark decays. The dataset used corresponds to an integrated luminosity of 4.5 fb−14.5 fb−1 of proton–proton collisions at a center-of-mass energy of 7 TeV and 20.3 fb−1 at 8 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No significant excess over the background prediction is observed and upper limits are set on the tt¯H production cross section. The observed exclusion upper limit at 95% confidence level is 6.7 times the predicted Standard Model cross section value. In addition, limits are set on the strength of the Yukawa coupling between the top quark and the Higgs boson, taking into account the dependence of the tt¯H and tH cross sections as well as the H→γγ branching fraction on the Yukawa coupling. Lower and upper limits at 95% confidence level are set at −1.3 and +8.0 times the Yukawa coupling strength in the Standard Model

Measurement of the correlation between flow harmonics of different order in lead-lead collisions at √sNN = 2.76 TeV with the ATLAS detector

Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using √sNN=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated luminosity of 7 μb−1. The vm−vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities, ε2 and ε3. However, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm−vn correlations for n=4 and 5 are found to disagree with εm−εn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations

Search for vectorlike B quarks in events with one isolated lepton, missing transverse momentum, and jets at √s = 8 TeV with the ATLAS detector

A search has been performed for pair production of heavy vectorlike down-type (B) quarks. The analysis explores the lepton-plus-jets final state, characterized by events with one isolated charged lepton (electron or muon), significant missing transverse momentum, and multiple jets. One or more jets are required to be tagged as arising from b quarks, and at least one pair of jets must be tagged as arising from the hadronic decay of an electroweak boson. The analysis uses the full data sample of pp collisions recorded in 2012 by the ATLAS detector at the LHC, operating at a center-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 20.3 fb −1 . No significant excess of events is observed above the expected background. Limits are set on vectorlike B production, as a function of the B branching ratios, assuming the allowable decay modes are B → Wt/Zb/Hb. In the chiral limit with a branching ratio of 100% for the decay B → Wt, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 810 GeV (760 GeV). In the case where the vectorlike B quark has branching ratio values corresponding to those of an SU(2) singlet state, the observed (expected) 95% C.L. lower limit on the vectorlike B mass is 640 GeV (505 GeV). The same analysis, when used to investigate pair production of a colored, charge 5/3 exotic fermion T 5/3 , with subsequent decay T 5/3 → Wt, sets an observed (expected) 95% C.L. lower limit on the T 5/3 mass of 840 GeV (780 GeV)

Fiducial and differential cross sections of Higgs boson production measured in the four-lepton decay channel in pp collisions at √s = 8 TeV with the ATLAS detector

Measurements of fiducial and differential cross sections of Higgs boson production in the H→ZZ∗ → 4ℓ decay channel are presented. The cross sections are determined within a fiducial phase space and corrected for detection efficiency and resolution effects. They are based on 20.3 fb−¹ of pp collision data, produced at √s = 8 TeV centre-of-mass energy at the LHC and recorded by the ATLAS detector. The differential measurements are performed in bins of transverse momentum and rapidity of the four-lepton system, the invariant mass of the subleading lepton pair and the decay angle of the leading lepton pair with respect to the beam line in the four-lepton rest frame, as well as the number of jets and the transverse momentum of the leading jet. The measured cross sections are compared to selected theoretical calculations of the Standard Model expectations. No significant deviation from any of the tested predictions is found

Measurements of fiducial cross-sections for t\bart production with one or two additional b-jets in pp collisions at √s =8 TeVusing the ATLAS detector

Fiducial cross-sections for $t\bar{t}$ production with one or two additional $b$-jets are reported, using an integrated luminosity of 20.3 fb$^{-1}$ of proton--proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for $t\bar{t}$ events with at least one additional $b$-jet is measured to be 950 $\pm$ 70 (stat.) $^{+240}_{-190}$ (syst.) fb in the lepton-plus-jets channel and 50 $\pm$ 10 (stat.) $^{+15}_{-10}$ (syst.) fb in the $e \mu$ channel. The cross-section times branching ratio for events with at least two additional $b$-jets is measured to be 19.3 $\pm$ 3.5 (stat.) $\pm$ 5.7 (syst.) fb in the dilepton channel ($e \mu$,\,$\mu\mu$, and \,$ee$) using a method based on tight selection criteria, and 13.5 $\pm$ 3.3 (stat.) $\pm$ 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 $\pm$ 0.33 (stat.) $\pm$ 0.28 (syst.)\% for the ratio of $t\bar{t}$ production with two additional $b$-jets to $t\bar{t}$ production with any two additional jets. All measurements are in good agreement with recent theory predictions.Comment: 41 pages plus author list + cover page (58 total), 9 Figures, 16 tables, submitted to EPJC, all figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2014-10

Measurement of the branching ratio Γ(Λb⁰ → ψ(2S)Λ0)/Γ(Λb⁰ → J/ψΛ0) with the ATLAS detector

An observation of the $\Lambda_b^0 \rightarrow \psi(2S) \Lambda^0$ decay and a comparison of its branching fraction with that of the $\Lambda_b^0 \rightarrow J/\psi \Lambda^0$ decay has been made with the ATLAS detector in proton--proton collisions at $\sqrt{s}=8\,$TeV at the LHC using an integrated luminosity of $20.6\,$fb$^{-1}$. The $J/\psi$ and $\psi(2S)$ mesons are reconstructed in their decays to a muon pair, while the $\Lambda^0\rightarrow p\pi^-$ decay is exploited for the $\Lambda^0$ baryon reconstruction. The $\Lambda_b^0$ baryons are reconstructed with transverse momentum $p_{\rm T}>10\,$GeV and pseudorapidity $|\eta|<2.1$. The measured branching ratio of the $\Lambda_b^0 \rightarrow \psi(2S) \Lambda^0$ and $\Lambda_b^0 \rightarrow J/\psi \Lambda^0$ decays is $\Gamma(\Lambda_b^0 \rightarrow \psi(2S)\Lambda^0)/\Gamma(\Lambda_b^0 \rightarrow J/\psi\Lambda^0) = 0.501\pm 0.033 ({\rm stat})\pm 0.019({\rm syst})$, lower than the expectation from the covariant quark model.Comment: 12 pages plus author list (28 pages total), 5 figures, 1 table, published on Physics Letters B 751 (2015) 63-80. All figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/BPHY-2013-08