Stereoselective Syntheses of 3’-Hydroxyamino- and 3’-Methoxyamino-2’,3’-Dideoxynucleosides

Aminonucleosides are used as key motifs in medicinal and bioconjugate chemistry; however, existing strategies toward 3′-hypernucleophilic amine systems do not readily deliver deoxyribo-configured products. We report diastereoselective syntheses of deoxyribo- and deoxyxylo-configured 3′-hydroxyamino- and 3′-methoxyamino-nucelosides from 3′-imine intermediates. The presence or absence of the 5′-hydroxyl-group protection dictates facial selectivity via inter- or intramolecular delivery of hydride from BH3 (borane). Protecting group screening gave one access to previously unknown 3′-methoxyamino-deoxyguanosine derivatives

Reactivities of electrophilic N–F fluorinating reagents

Electrophilic fluorination represents one of the most direct and useful methods available for the selective introduction of fluorine into organic compounds. Electrophilic fluorinating reagents of the N–F class have revolutionised the incorporation of fluorine atoms into both pharmaceutically- and agrochemically-important substrates. Since the earliest N–F reagents were commercialised in the 1990s, their reactivities have been investigated using qualitative and, more recently, quantitative methods. This review discusses the different experimental approaches employed to determine reactivities of N–F reagents, focussing on the kinetics studies reported in recent years. We make critical evaluations of the experimental approaches against each other, theoretical approaches, and their applicability towards practical problems. The opportunities for achieving more efficient synthetic electrophilic fluorination processes through kinetic understanding are highlighted

Graft copolymers of hydroxyethyl cellulose by a ‘grafting to’ method: 15N labelling as a powerful characterisation tool in ‘click’ polymer chemistry

We demonstrate how 15N labelling can be used to probe the success of ‘grafting to’ processes, through the preparation of well-defined graft copolymers of hydroxyethyl cellulose by combining RAFT polymerisation and copper-catalysed azide-alkyne cycloaddition (CuAAC). Using synthesised alkyne-functionalised chain transfer agents, short-chain (DP=10) poly(N-vinylpyrrolidone) (PVP) and poly(N-isopropyl acrylamide) (PNIPAAM) were prepared in high conversion in a controlled manner (ƉM of ~1.4 and 1.2 respectively). Separately, partially 15N-labelled N3-HEC was synthesised and characterised using solid state 13C, 15N CP-MAS NMR and FTIR spectroscopies. Alkyne-terminated PVP and PNIPAAM were grafted at different graft densities onto partially 15N-labelled N3-HEC using the click reaction. The hybrid HEC-g-polymer materials were fully characterised using solid state 13C and 15N CP-MAS NMR and FTIR spectroscopies. While 13C and FTIR spectroscopies gave indirect or weak evidence of CuAAC coupling, the cycloaddition of the alkyne-terminated polymers with N3-HEC was proven unambiguously by 15N solid state NMR spectroscopy. This indicates the utility of 15N labelling for probing the coupling efficiency of CuAAC reactions when employed in ‘grafting to’ processes with cellulosic substrates

Triazolium Salt Organocatalysis: Mechanistic Evaluation of Unusual Ortho-Substituent Effects on Deprotonation

Organocatalysis by N-heterocyclic carbenes is normally initiated by the deprotonation of precursor azolium ions to form active nucleophilic species. Substituent effects on deprotonation have an impact on catalytic efficiency and provide insight into general catalytic mechanisms by commonly used azolium systems. Using an NMR kinetic method for the analysis of C(3)-H/D exchange, we determined log kex–pD profiles for three ortho-substituted N-aryl triazolium salts, which enables a detailed analysis of ortho-substituent effects on deprotonation. This includes N-5-methoxypyrid-2-yl triazolium salt 7 and di-ortho-methoxy and di-ortho-isopropoxyphenyl triazolium salts 8 and 9, and we acquired additional kinetic data to supplement our previously published analysis of N-pyrid-2-yl triazolium salt 6. For 2-pyridyl triazoliums 6 and 7, novel acid catalysis of C(3)-H/D exchange is observed under acidic conditions. These kinetic data were supplemented by DFT analyses of the conformational preferences of 6 upon N-protonation. A C(3) deprotonation mechanism involving intramolecular general base deprotonation by the pyridyl nitrogen of the N(1)-deuterated dicationic triazolium salt is most consistent with the data. We also report kDO values (protofugalities) for deuteroxide-catalyzed exchange for 6–9. The protofugalities for 8 and 9 are the lowest values to date in the N-aryl triazolium series

The synthesis, conformation and hydrolytic stability of an N,S-bridging thiophosphoramidate analogue of thymidylyl-3 ',5 '-thymidine

A 3 ’ - N ,5 ’ - S -bridging thiophosphoramidate analogue of thymidylyl-3 ’ ,5 ’ -thymidine was synthesised underaqueous conditions.1H NMR conformational measurements show that the 3 ’ - N -substituted deoxyribosering is biased towards the ‘ north ’ , RNA-like conformation. Rate constants for hydrolysis of the analoguewere measured at 90 °C in the pH range 1.3 – 10.9. The pH-log k obs pro fi le displays a pH-independentregion between approximately pH 7 and 10 ( t 1/2 ∼ 13 days). Under acidic conditions, k obs displays a fi rstorder dependence on [H 3 O+]</p

Constraints on anomalous QGC's in e+e−e^{+}e^{-} interactions from 183 to 209 GeV

The acoplanar photon pairs produced in the reaction e(+) e(-) - → vvyy are analysed in the 700 pb(-1) of data collected by the ALEPH detector at centre-of-mass energies between 183 and 209 GeV. No deviation from the Standard Model predictions is seen in any of the distributions examined. The resulting 95% C.L. limits set on anomalous QGCs, a(0)(Z), a(c)(Z), a(0)(W) and a(c)(W), are -0.012 lt a(0)(Z)/Lambda(2) lt +0.019 GeV-2, -0.041 lt a(c)(Z)/Lambda(2) lt +0.044 GeV-2, -0.060 lt a(0)(W)/Lambda(2) lt +0.055 GeV-2, -0.099 lt a(c)(W)/Lambda(2) lt +0.093 GeV-2, where Lambda is the energy scale of the new physics responsible for the anomalous couplings

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements