Efficient labelling for efficient deep learning: the benefit of a multiple-image-ranking method to generate high volume training data applied to ventricular slice level classification in cardiac MRI

BACKGROUND: Getting the most value from expert clinicians' limited labelling time is a major challenge for artificial intelligence (AI) development in clinical imaging. We present a novel method for ground-truth labelling of cardiac magnetic resonance imaging (CMR) image data by leveraging multiple clinician experts ranking multiple images on a single ordinal axis, rather than manual labelling of one image at a time. We apply this strategy to train a deep learning (DL) model to classify the anatomical position of CMR images. This allows the automated removal of slices that do not contain the left ventricular (LV) myocardium. METHODS: Anonymised LV short-axis slices from 300 random scans (3,552 individual images) were extracted. Each image's anatomical position relative to the LV was labelled using two different strategies performed for 5 hours each: (I) 'one-image-at-a-time': each image labelled according to its position: 'too basal', 'LV', or 'too apical' individually by one of three experts; and (II) 'multiple-image-ranking': three independent experts ordered slices according to their relative position from 'most-basal' to 'most apical' in batches of eight until each image had been viewed at least 3 times. Two convolutional neural networks were trained for a three-way classification task (each model using data from one labelling strategy). The models' performance was evaluated by accuracy, F1-score, and area under the receiver operating characteristics curve (ROC AUC). RESULTS: After excluding images with artefact, 3,323 images were labelled by both strategies. The model trained using labels from the 'multiple-image-ranking strategy' performed better than the model using the 'one-image-at-a-time' labelling strategy (accuracy 86% vs. 72%, P=0.02; F1-score 0.86 vs. 0.75; ROC AUC 0.95 vs. 0.86). For expert clinicians performing this task manually the intra-observer variability was low (Cohen's κ=0.90), but the inter-observer variability was higher (Cohen's κ=0.77). CONCLUSIONS: We present proof of concept that, given the same clinician labelling effort, comparing multiple images side-by-side using a 'multiple-image-ranking' strategy achieves ground truth labels for DL more accurately than by classifying images individually. We demonstrate a potential clinical application: the automatic removal of unrequired CMR images. This leads to increased efficiency by focussing human and machine attention on images which are needed to answer clinical questions

Role of Potash Alum in Hepatitis C virus Transmission at Barber's Shop

Hepatitis C virus (HCV) is the main cause of severe liver disease, including hepatocellular carcinoma, cirrhosis and end stage liver disease. In Pakistan most of HCV positive patients have history of facial/armpit shaving from barbers. 79% of barbers are rubbing Potash Alum stone on facial shaving cuts. Dark blood spots are analyzed on Potash Alum stones being used at different barber shops. The aim of the study was to check the viability of hepatitis C virus on potash alum stone being used at barber shops. Blood samples from HCV positive patients were taken and treated with 0.1, 0.2, 0.3, 0.4 and 0.5 molar concentrations of Potash Alum for different periods of time. Blood was centrifuged to isolate the serum; HCV RNA was extracted from serum and subjected to first strand synthesis and PCR. PCR fragments were confirmed by sequencing. PCR amplification was observed in all the samples, treated with different concentrations of Potash Alum, indicated that the virus remains alive on Potash Alum stone for a long period of time. Potash Alum being used by barbers on facial shaving cuts has definite role in HCV transmission in Pakistani population. Therefore use of Potash Alum stone should be banned on facial shaving cuts at barber shops

Predictors of esophageal varices in patients with HBV-related cirrhosis: a retrospective study

<p>Abstract</p> <p>Background</p> <p>All patients with liver cirrhosis are recommended to undergo an evaluation of esophageal varices (EV) to assess their risk of bleeding. Predicting the presence of EV through non-invasive means may reduce a large number of unnecessary endoscopies. This study was designed to develop a predictive model for varices in patients with Hepatitis B virus-related cirrhosis.</p> <p>Methods</p> <p>The retrospective analysis was performed in 146 patients with Hepatitis B virus-related cirrhosis. The data were assessed by univariate analysis and a multivariate logistic regression analysis. In addition, the receiver operating characteristic curves were also applied to calculate and compare the accuracy of the model and other single parameters for the diagnosis of esophageal varices.</p> <p>Results</p> <p>We found the prevalence of EV in patients with Hepatitis B virus-related cirrhosis to be 74.7%. In addition, platelet count, spleen width, portal vein diameter and platelet count/spleen width ratio were significantly associated with the presence of esophageal varices on univariate analysis. A multivariate analysis revealed that only the spleen width and portal vein diameter were independent risk factors. The area under the receiver operating characteristic curve of regression function (RF) model, which was composed of the spleen width and portal vein diameter, was higher than that of the platelet count. With a cut-off value of 0.3631, the RF model had an excellent sensitivity of 87.2% and an acceptable specificity of 59.5% with an overall accuracy of 80.1%.</p> <p>Conclusion</p> <p>Our data suggest that portal vein diameter and spleen width rather than platelet count may predict the presence of varices in patients with Hepatitis B virus-related cirrhosis, and that the RF model may help physicians to identify patients who would most likely benefit from screenings for EV.</p

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Tibial Loading Increases Osteogenic Gene Expression and Cortical Bone Volume in Mature and Middle-Aged Mice

There are conflicting data on whether age reduces the response of the skeleton to mechanical stimuli. We examined this question in female BALB/c mice of different ages, ranging from young to middle-aged (2, 4, 7, 12 months). We first assessed markers of bone turnover in control (non-loaded) mice. Serum osteocalcin and CTX declined significantly from 2 to 4 months (p<0.001). There were similar age-related declines in tibial mRNA expression of osteoblast- and osteoclast-related genes, most notably in late osteoblast/matrix genes. For example, Col1a1 expression declined 90% from 2 to 7 months (p<0.001). We then assessed tibial responses to mechanical loading using age-specific forces to produce similar peak strains (−1300 µε endocortical; −2350 µε periosteal). Axial tibial compression was applied to the right leg for 60 cycles/day on alternate days for 1 or 6 weeks. qPCR after 1 week revealed no effect of loading in young (2-month) mice, but significant increases in osteoblast/matrix genes in older mice. For example, in 12-month old mice Col1a1 was increased 6-fold in loaded tibias vs. controls (p = 0.001). In vivo microCT after 6 weeks revealed that loaded tibias in each age group had greater cortical bone volume (BV) than contralateral control tibias (p<0.05), due to relative periosteal expansion. The loading-induced increase in cortical BV was greatest in 4-month old mice (+13%; p<0.05 vs. other ages). In summary, non-loaded female BALB/c mice exhibit an age-related decline in measures related to bone formation. Yet when subjected to tibial compression, mice from 2–12 months have an increase in cortical bone volume. Older mice respond with an upregulation of osteoblast/matrix genes, which increase to levels comparable to young mice. We conclude that mechanical loading of the tibia is anabolic for cortical bone in young and middle-aged female BALB/c mice

The Role of Neighborhood Environment in Promoting Risk Factors of Cardiovascular Disease among Young Adults: Data from Middle to High Income Population in an Asian Megacity

Background: Modifiable risk factors of cardiovascular diseases (CVD) have their triggers in the neighborhood environments of communities. Studying the environmental triggers for CVD risk factors is important to understand the situation in a broader perspective. Young adults are influenced the most by the environment profile around them hence it is important to study this subset of the population.Methods: This was a descriptive study conducted using the EPOCH research tool designed by the authors of the PURE study. The study population consisted of young adults aged 18-25 in two areas of Karachi. The study setting was busy shopping malls frequented by young adults in the particular community being studied.Results: Our total sample size was 120 individuals, who consented to be interviewed by our interviewers. Less than 50% of the population recognized some form of restriction regarding smoking in their communities. The largest contributor to tobacco advertising was actors smoking in movies and TV shows with 89% responses from both communities. Only 11.9% of the individuals disapproved of smoking cigarettes among men with wide acceptance of \u27sheesha\u27 across all age groups. Advertising for smoking and junk food was more frequent as compared to smoking cessation, healthy diet and exercise in both the areas. Unhealthy food items were more easily available in contrast to healthier options. The cost of healthy snack food options including vegetables and fruits was higher than sugary drinks and foods.CONCLUSION: This assessment showed that both communities were exposed to environments that promote risk factors for cardiovascular diseases