78 research outputs found

    Band structure of honeycomb photonic crystal slabs

    Full text link
    Two-dimensional (2D) honeycomb photonic crystals with cylinders and connecting walls have the potential to have a large full band gap. In experiments, 2D photonic crystals do not have an infinite height, and therefore, we investigate the effects of the thickness of the walls, the height of the slabs and the type of the substrates on the photonic bands and gap maps of 2D honeycomb photonic crystal slabs. The band structures are calculated by the plane wave expansion method and the supercell approach. We find that the slab thickness is a key parameter affecting the band gap size while on the other hand the wall thickness hardly affact the gap size. For symmetric photonic crystal slabs with lower dielectric claddings, the height of the slabs needs to be sufficiently large to maintain a band gap. For asymmetric claddings, the projected band diagrams are similar to that of symmetric slabs as long as the dielectric constants of the claddings do not differ greatly.Comment: Accepted for publication in Journal of Applied Physic

    Band structure of honeycomb photonic crystal slabs

    Get PDF
    Two-dimensional ͑2D͒ honeycomb photonic crystals with cylinders and connecting walls have the potential to have a large full band gap. In experiments, 2D photonic crystals do not have an infinite height, and therefore, we investigate the effects of the thickness of the walls, the height of the slabs, and the type of the substrates on the photonic bands and gap maps of 2D honeycomb photonic crystal slabs. The band structures are calculated by the plane wave expansion method and the supercell approach. We find that the slab thickness is a key parameter affecting the band gap size, while on the other hand the wall thickness hardly affects the gap size. For symmetric photonic crystal slabs with lower dielectric claddings, the height of the slabs needs to be sufficiently large to maintain a band gap. For asymmetric claddings, the projected band diagrams are similar to that of symmetric slabs as long as the dielectric constants of the claddings do not differ greatly

    Macrophages and Fc-receptor interactions contribute to the antitumour activities of the anti-CD40 antibody SGN-40

    Get PDF
    SGN-40 is a therapeutic antibody targeting CD40, which induces potent anti-lymphoma activities via direct apoptotic signalling cells and by cell-mediated cytotoxicity. Here we show antibody-dependent cellular phagocytosis (ADCP) by macrophages to contribute significantly to the therapeutic activities and that the antitumour effects of SGN-40 depend on Fc interactions

    Biomechanical comparison of a new stand-alone anterior lumbar interbody fusion cage with established fixation techniques – a three-dimensional finite element analysis

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Initial promise of a stand-alone interbody fusion cage to treat chronic back pain and restore disc height has not been realized. In some instances, a posterior spinal fixation has been used to enhance stability and increase fusion rate. In this manuscript, a new stand-alone cage is compared with conventional fixation methods based on the finite element analysis, with a focus on investigating cage-bone interface mechanics and stress distribution on the adjacent tissues.</p> <p>Methods</p> <p>Three trapezoid 8° interbody fusion cage models (dual paralleled cages, a single large cage, or a two-part cage consisting of a trapezoid box and threaded cylinder) were created with or without pedicle screws fixation to investigate the relative importance of the screws on the spinal segmental response. The contact stress on the facet joint, slip displacement of the cage on the endplate, and rotational angle of the upper vertebra were measured under different loading conditions.</p> <p>Results</p> <p>Simulation results demonstrated less facet stress and slip displacement with the maximal contact on the cage-bone interface. A stand-alone two-part cage had good slip behavior under compression, flexion, extension, lateral bending and torsion, as compared with the other two interbody cages, even with the additional posterior fixation. However, the two-part cage had the lowest rotational angles under flexion and torsion, but had no differences under extension and lateral bending.</p> <p>Conclusion</p> <p>The biomechanical benefit of a stand-alone two-part fusion cage can be justified. This device provided the stability required for interbody fusion, which supports clinical trials of the cage as an alternative to circumferential fixations.</p

    SPARC Overexpression Inhibits Cell Proliferation in Neuroblastoma and Is Partly Mediated by Tumor Suppressor Protein PTEN and AKT

    Get PDF
    Secreted protein acidic and rich in cysteine (SPARC) is also known as BM-40 or Osteonectin, a multi-functional protein modulating cell–cell and cell–matrix interactions. In cancer, SPARC is not only linked with a highly aggressive phenotype, but it also acts as a tumor suppressor. In the present study, we sought to characterize the function of SPARC and its role in sensitizing neuroblastoma cells to radio-therapy. SPARC overexpression in neuroblastoma cells inhibited cell proliferation in vitro. Additionally, SPARC overexpression significantly suppressed the activity of AKT and this suppression was accompanied by an increase in the tumor suppressor protein PTEN both in vitro and in vivo. Restoration of neuroblastoma cell radio-sensitivity was achieved by overexpression of SPARC in neuroblastoma cells in vitro and in vivo. To confirm the role of the AKT in proliferation inhibited by SPARC overexpression, we transfected neuroblastoma cells with a plasmid vector carrying myr-AKT. Myr-AKT overexpression reversed SPARC-mediated PTEN and increased proliferation of neuroblastoma cells in vitro. PTEN overexpression in parallel with SPARC siRNA resulted in decreased AKT phosphorylation and proliferation in vitro. Taken together, these results establish SPARC as an effector of AKT-PTEN-mediated inhibition of proliferation in neuroblastoma in vitro and in vivo

    In situ detection of dopamine using nitrogen incorporated diamond nanowire electrode

    Get PDF
    [[abstract]]Significant difference was observed for the simultaneous detection of dopamine (DA), ascorbic acid (AA), and uric acid (UA) mixture using nitrogen incorporated diamond nanowire (DNW) film electrodes grown by microwave plasma enhanced chemical vapor deposition. For the simultaneous sensing of ternary mixtures of DA, AA, and UA, well-separated voltammetric peaks are obtained using DNW film electrodes in differential pulse voltammetry (DPV) measurements. Remarkable signals in cyclic voltammetry responses to DA, AA and UA (three well defined voltammetric peaks at potentials around 235, 30, 367 mV for DA, AA and UA respectively) and prominent enhancement of the voltammetric sensitivity are observed at the DNW electrodes. In comparison to the DPV results of graphite, glassy carbon and boron doped diamond electrodes, the high electrochemical potential difference is achieved via the use of the DNW film electrodes which is essential for distinguishing the aforementioned analytes. The enhancement in EC properties is accounted for by increase in sp2 content, new C–N bonds at the diamond grains, and increase in the electrical conductivity at the grain boundary, as revealed by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure measurements. Consequently, the DNW film electrodes provide a clear and efficient way for the selective detection of DA in the presence of AA and UA.[[booktype]]箙

    Reconstruction and identification of τ lepton decays to hadrons and Μτ at CMS

    Get PDF
    This paper describes the algorithms used by the CMS experiment to reconstruct and identify tau -> hadrons + nu(tau) decays during Run 1 of the LHC. The performance of the algorithms is studied in proton-proton collisions recorded at a centre-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 19.7 fb(-1). The algorithms achieve an identification efficiency of 50-60%, with misidentification rates for quark and gluon jets, electrons, and muons between per mille and per cent levels

    Reconstruction and identification of tau lepton decays to hadrons and tau neutrino at CMS

    Get PDF
    This paper describes the algorithms used by the CMS experiment to reconstruct and identify tau to hadrons + tau neutrino decays during Run 1 of the LHC. The performance of the algorithms is studied in proton-proton collisions recorded at a centre-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 19.7 inverse femtobarns. The algorithms achieve an identification efficiency of 50-60%, with misidentification rates for quark and gluon jets, electrons, and muons between per mille and per cent levels.Comment: Replaced with published version. Added journal referenc

    Measurement of the production cross section for Z gamma -> nu(nu)over-bar gamma in pp collisions at √s=7 TeV and limits on ZZ gamma and Z gamma gamma triple gauge boson couplings

    Get PDF
    This article is the pre-print version of the final published paper that is available from the link below.A measurement of the Z → vvÎł cross section in pp collisions at root s = 7TeV is presented, using data corresponding to an integrated luminosity of 5.0 fb-1 collected with the CMS detector. This measurement is based on the observation of events with an imbalance of transverse energy in excess of 130 GeV and a single photon in the absolute pseudorapidity range |n| < 1:4 with transverse energy above 145 GeV. The Z →vvÎł production cross section is measured to be 21.1±4.2 (stat:)±4.3 (syst:)±0.5 (lum:) fb, which agrees with the standard model prediction of 21.9±1.1 fb. The results are combined with the CMS measurement of Z production in the l+l- Îł final state (where l is an electron or a muon) to yield the most stringent limits to date on triple gauge boson couplings: |hZ3|< 2.7 x 10-3, |hZ4| < 1,3 x 10-5 for ZZÎł and |hÎł3| < 2.9 x10-3, |hÎł4| < 1.5 x 10-5 for Zγγ couplings

    A Genome-Wide Association Study of Diabetic Kidney Disease in Subjects With Type 2 Diabetes

    Get PDF
    dentification of sequence variants robustly associated with predisposition to diabetic kidney disease (DKD) has the potential to provide insights into the pathophysiological mechanisms responsible. We conducted a genome-wide association study (GWAS) of DKD in type 2 diabetes (T2D) using eight complementary dichotomous and quantitative DKD phenotypes: the principal dichotomous analysis involved 5,717 T2D subjects, 3,345 with DKD. Promising association signals were evaluated in up to 26,827 subjects with T2D (12,710 with DKD). A combined T1D+T2D GWAS was performed using complementary data available for subjects with T1D, which, with replication samples, involved up to 40,340 subjects with diabetes (18,582 with DKD). Analysis of specific DKD phenotypes identified a novel signal near GABRR1 (rs9942471, P = 4.5 x 10(-8)) associated with microalbuminuria in European T2D case subjects. However, no replication of this signal was observed in Asian subjects with T2D or in the equivalent T1D analysis. There was only limited support, in this substantially enlarged analysis, for association at previously reported DKD signals, except for those at UMOD and PRKAG2, both associated with estimated glomerular filtration rate. We conclude that, despite challenges in addressing phenotypic heterogeneity, access to increased sample sizes will continue to provide more robust inference regarding risk variant discovery for DKD.Peer reviewe
    • 

    corecore