134 research outputs found
Orientation bias of optically selected galaxy clusters and its impact on stacked weak-lensing analyses
Weak-lensing measurements of the averaged shear profiles of galaxy clusters binned by some proxy for cluster mass are commonly converted to cluster mass estimates under the assumption that these cluster stacks have spherical symmetry. In this paper, we test whether this assumption holds for optically selected clusters binned by estimated optical richness. Using mock catalogues created from N-body simulations populated realistically with galaxies, we ran a suite of optical cluster finders and estimated their optical richness. We binned galaxy clusters by true cluster mass and estimated optical richness and measure the ellipticity of these stacks. We find that the processes of optical cluster selection and richness estimation are biased, leading to stacked structures that are elongated along the line of sight. We show that weak-lensing alone cannot measure the size of this orientation bias. Weak-lensing masses of stacked optically selected clusters are overestimated by up to 3–6 per cent when clusters can be uniquely associated with haloes. This effect is large enough to lead to significant biases in the cosmological parameters derived from large surveys like the Dark Energy Survey, if not calibrated via simulations or fitted simultaneously. This bias probably also contributes to the observed discrepancy between the observed and predicted Sunyaev–Zel’dovich signal of optically selected clusters
Á nuestros amados hijos en Jesucristo los M. RR. PP. Provinciales, Maestros Priores, Rectores, Vicarios, Presidentes, y á las RR. MM. Prioras, ó Presidentas y demas Religiosos y Religiosas de la Orden de Predicadores. Nos Fray Joaquin Briz ... Maestro General ... Despues de trece años en los que nuestra Orden de Predicadores se ha visto gobernada por Vicarios Generales interinos, asi en las provincias de España como en las de Italia, sin que las ... circunstancias que nos han afligido hayan permitido el nombramiento de un General de toda la Orden ...
Contiene breve de León XIITít. tomado del principio del textoTexto fechado en "Madrid á 15 de octubre de 1825"Texto del breve a dos col
Planck 2013 results. XXII. Constraints on inflation
We analyse the implications of the Planck data for cosmic inflation. The Planck nominal mission temperature anisotropy measurements, combined with the WMAP large-angle polarization, constrain the scalar spectral index to be ns = 0:9603 _ 0:0073, ruling out exact scale invariance at over 5_: Planck establishes an upper bound on the tensor-to-scalar ratio of r < 0:11 (95% CL). The Planck data thus shrink the space of allowed standard inflationary models, preferring potentials with V00 < 0. Exponential potential models, the simplest hybrid inflationary models, and monomial potential models of degree n _ 2 do not provide a good fit to the data. Planck does not find statistically significant running of the scalar spectral index, obtaining dns=dln k = 0:0134 _ 0:0090. We verify these conclusions through a numerical analysis, which makes no slowroll approximation, and carry out a Bayesian parameter estimation and model-selection analysis for a number of inflationary models including monomial, natural, and hilltop potentials. For each model, we present the Planck constraints on the parameters of the potential and explore several possibilities for the post-inflationary entropy generation epoch, thus obtaining nontrivial data-driven constraints. We also present a direct reconstruction of the observable range of the inflaton potential. Unless a quartic term is allowed in the potential, we find results consistent with second-order slow-roll predictions. We also investigate whether the primordial power spectrum contains any features. We find that models with a parameterized oscillatory feature improve the fit by __2 e_ _ 10; however, Bayesian evidence does not prefer these models. We constrain several single-field inflation models with generalized Lagrangians by combining power spectrum data with Planck bounds on fNL. Planck constrains with unprecedented accuracy the amplitude and possible correlation (with the adiabatic mode) of non-decaying isocurvature fluctuations. The fractional primordial contributions of cold dark matter (CDM) isocurvature modes of the types expected in the curvaton and axion scenarios have upper bounds of 0.25% and 3.9% (95% CL), respectively. In models with arbitrarily correlated CDM or neutrino isocurvature modes, an anticorrelated isocurvature component can improve the _2 e_ by approximately 4 as a result of slightly lowering the theoretical prediction for the ` <_ 40 multipoles relative to the higher multipoles. Nonetheless, the data are consistent with adiabatic initial conditions
Saint or Sinner?: A Reconsideration of the Career of Prince Alexandre de Merode, Chair of the International Olympic Committee’s Medical Commission, 1967-2002
This article explores the role of Prince Alexandre de Merode in heading the IOC’s fight against drugs from the 1960s to 2002. History has not served de Merode very well. He has been presented in simplistic ways that emerge from context rather than evidence – as either a saint or a sinner. IOC-sanctioned accounts cast him in the mould of the saint: a moral and intelligent man who saved sports from doping. In contrast, sports academics have tended to portray him as a sinner: an ineffectual leader who did not develop either the testing systems or the punishments required to prevent doping and who deliberately concealed evidence of high-profile doping cases. This article assesses both representations before presenting information to support a richer and more complicated interpretation
Planck 2015 results. V. LFI calibration
We present a description of the pipeline used to calibrate the Planck Low Frequency Instrument (LFI) timelines into thermodynamic temperatures for the Planck 2015 data release, covering four years of uninterrupted operations. As in the 2013 data release, our calibrator is provided by the spin-synchronous modulation of the cosmic microwave background dipole, but we now use the orbital component, rather than adopting the Wilkinson Microwave Anisotropy Probe (WMAP) solar dipole. This allows our 2015 LFI analysis to provide an independent Solar dipole estimate, which is in excellent agreement with that of HFI and within 1σ (0.3% in amplitude) of the WMAP value. This 0.3% shift in the peak-to-peak dipole temperature from WMAP and a general overhaul of the iterative calibration code increases the overall level of the LFI maps by 0.45% (30 GHz), 0.64% (44 GHz), and 0.82% (70 GHz) in temperature with respect to the 2013 Planck data release, thus reducing the discrepancy with the power spectrum measured by WMAP. We estimate that the LFI calibration uncertainty is now at the level of 0.20% for the 70 GHz map, 0.26% for the 44 GHz map, and 0.35% for the 30 GHz map. We provide a detailed description of the impact of all the changes implemented in the calibration since the previous data release
Planck 2015 results. VI. LFI mapmaking
This paper describes the mapmaking procedure applied to Planck Low Frequency Instrument (LFI) data. The mapmaking step takes as input the calibrated timelines and pointing information. The main products are sky maps of I, Q, and U Stokes components. For the first time, we present polarization maps at LFI frequencies. The mapmaking algorithm is based on a destriping technique, which is enhanced with a noise prior. The Galactic region is masked to reduce errors arising from bandpass mismatch and high signal gradients. We apply horn-uniform radiometer weights to reduce the effects of beam-shape mismatch. The algorithm is the same as used for the 2013 release, apart from small changes in parameter settings. We validate the procedure through simulations. Special emphasis is put on the control of systematics, which is particularly important for accurate polarization analysis. We also produce low-resolution versions of the maps and corresponding noise covariance matrices. These serve as input in later analysis steps and parameter estimation. The noise covariance matrices are validated through noise Monte Carlo simulations. The residual noise in the map products is characterized through analysis of half-ring maps, noise covariance matrices, and simulations
Planck 2015 results. IV. Low Frequency Instrument beams and window functions
This paper presents the characterization of the in-flight beams, the beam window functions, and the associated uncertainties for the Planck Low Frequency Instrument (LFI). The structure of the paper is similar to that presented in the 2013 Planck release; the main differences concern the beam normalization and the delivery of the window functions to be used for polarization analysis. The in-flight assessment of the LFI main beams relies on measurements performed during observations of Jupiter. By stacking data from seven Jupiter transits, the main beam profiles are measured down to –25 dB at 30 and 44 GHz, and down to –30 dB at 70 GHz. It has been confirmed that the agreement between the simulated beams and the measured beams is better than 1% at each LFI frequency band (within the 20 dB contour from the peak, the rms values are 0.1% at 30 and 70 GHz; 0.2% at 44 GHz). Simulated polarized beams are used for the computation of the effective beam window functions. The error budget for the window functions is estimated from both main beam and sidelobe contributions, and accounts for the radiometer band shapes. The total uncertainties in the effective beam window functions are 0.7% and 1% at 30 and 44 GHz, respectively (at ℓ ≈ 600); and 0.5% at 70 GHz (at ℓ ≈ 1000)
Planck 2013 results. IX. HFI spectral response
The Planck High Frequency Instrument (HFI) spectral response was determined
through a series of ground based tests conducted with the HFI focal plane in a
cryogenic environment prior to launch. The main goal of the spectral
transmission tests was to measure the relative spectral response (including
out-of-band signal rejection) of all HFI detectors. This was determined by
measuring the output of a continuously scanned Fourier transform spectrometer
coupled with all HFI detectors. As there is no on-board spectrometer within
HFI, the ground-based spectral response experiments provide the definitive data
set for the relative spectral calibration of the HFI. The spectral response of
the HFI is used in Planck data analysis and component separation, this includes
extraction of CO emission observed within Planck bands, dust emission,
Sunyaev-Zeldovich sources, and intensity to polarization leakage. The HFI
spectral response data have also been used to provide unit conversion and
colour correction analysis tools. Verifications of the HFI spectral response
data are provided through comparisons with photometric HFI flight data. This
validation includes use of HFI zodiacal emission observations to demonstrate
out-of-band spectral signal rejection better than 10^8. The accuracy of the HFI
relative spectral response data is verified through comparison with
complementary flight-data based unit conversion coefficients and colour
correction coefficients. These coefficients include those based upon HFI
observations of CO, dust, and Sunyaev-Zeldovich emission. General agreement is
observed between the ground-based spectral characterization of HFI and
corresponding in-flight observations, within the quoted uncertainty of each;
explanations are provided for any discrepancies.Comment: 27 pages, 28 figures, one of the papers associated with the 2013
Planck data releas
Planck 2013 results. III. LFI systematic uncertainties
We present the current estimate of instrumental and systematic effect
uncertainties for the Planck-Low Frequency Instrument relevant to the first
release of the Planck cosmological results. We give an overview of the main
effects and of the tools and methods applied to assess residuals in maps and
power spectra. We also present an overall budget of known systematic effect
uncertainties, which are dominated sidelobe straylight pick-up and imperfect
calibration. However, even these two effects are at least two orders of
magnitude weaker than the cosmic microwave background (CMB) fluctuations as
measured in terms of the angular temperature power spectrum. A residual signal
above the noise level is present in the multipole range , most notably
at 30 GHz, and is likely caused by residual Galactic straylight contamination.
Current analysis aims to further reduce the level of spurious signals in the
data and to improve the systematic effects modelling, in particular with
respect to straylight and calibration uncertainties.Comment: Accepted for publication by A&
Planck 2013 results. XX. Cosmology from Sunyaev-Zeldovich cluster counts
We present constraints on cosmological parameters using number counts as a
function of redshift for a sub-sample of 189 galaxy clusters from the Planck SZ
(PSZ) catalogue. The PSZ is selected through the signature of the
Sunyaev--Zeldovich (SZ) effect, and the sub-sample used here has a
signal-to-noise threshold of seven, with each object confirmed as a cluster and
all but one with a redshift estimate. We discuss the completeness of the sample
and our construction of a likelihood analysis. Using a relation between mass
and SZ signal calibrated to X-ray measurements, we derive constraints
on the power spectrum amplitude and matter density parameter
in a flat CDM model. We test the robustness of
our estimates and find that possible biases in the -- relation and the
halo mass function are larger than the statistical uncertainties from the
cluster sample. Assuming the X-ray determined mass to be biased low relative to
the true mass by between zero and 30%, motivated by comparison of the observed
mass scaling relations to those from a set of numerical simulations, we find
that , , and
. The value of
is degenerate with the mass bias; if the latter is fixed to a value
of 20% we find and a
tighter one-dimensional range . We find that the larger
values of and preferred by Planck's
measurements of the primary CMB anisotropies can be accommodated by a mass bias
of about 40%. Alternatively, consistency with the primary CMB constraints can
be achieved by inclusion of processes that suppress power on small scales
relative to the CDM model, such as a component of massive neutrinos
(abridged).Comment: 20 pages, accepted for publication by A&
- …