187 research outputs found

    Conditins for the Time Dissipative Structure Formation at Nonequilibrium Transitions

    Get PDF
    We discuss processes of the dissipative structure formation when the nonequilibrium phase transition takes place. The model is considered under assumptions that dispersion of the relaxation time of the order parameter and influence of the external force present. It was found that self-organization occurs through the Hopf bifurcation and results in the dissipative structure formation. Analysis was performed according to the Lyapunov and Floquet exponent investigation. It was found that the complex picture of ordering with two reentrant Hopf bifurcations occurs. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3025

    Multifractal spectrum of phase space related to generalized thermostatistics

    Full text link
    We consider a self-similar phase space with specific fractal dimension dd being distributed with spectrum function f(d)f(d). Related thermostatistics is shown to be governed by the Tsallis formalism of the non-extensive statistics, where the non-additivity parameter is equal to τˉ(q)1/τ(q)>1{\bar\tau}(q)\equiv 1/\tau(q)>1, and the multifractal function τ(q)=qdqf(dq)\tau(q)= qd_q-f(d_q) is the specific heat determined with multifractal parameter q[1,)q\in [1,\infty). In this way, the equipartition law is shown to take place. Optimization of the multifractal spectrum function f(d)f(d) derives the relation between the statistical weight and the system complexity. It is shown the statistical weight exponent τ(q)\tau(q) can be modeled by hyperbolic tangent deformed in accordance with both Tsallis and Kaniadakis exponentials to describe arbitrary multifractal phase space explicitly. The spectrum function f(d)f(d) is proved to increase monotonically from minimum value f=1f=-1 at d=0d=0 to maximum one f=1f=1 at d=1d=1. At the same time, the number of monofractals increases with growth of the phase space volume at small dimensions dd and falls down in the limit d1d\to 1.Comment: 16 pages, 7 figure

    Chaos in a generalized Lorenz system

    Full text link
    A three-component dynamic system with influence of pumping and nonlinear dissipation describing a quantum cavity electrodynamic device is studied. Different dynamical regimes are investigated in terms of divergent trajectories approaches and fractal statistics. It has been shown, that in such a system stable and unstable dissipative structures type of limit cycles can be formed with variation of pumping and nonlinear dissipation rate. Transitions to chaotic regime and the corresponding chaotic attractor are studied in details

    Multifractal spectrum of phase space related to generalized thermostatistics

    Get PDF
    We consider a self-similar phase space with specific fractal dimension d being distributed with spectrum function f(d). Related thermostatistics is shown to be governed by the Tsallis formalism of the non-extensive statistics,where the non-additivity parameter equals to τ(q)≡1/τ(q)> 1, and the multifractal function τ(q)=qdq−f(dq ) is the specific heat determined with multifractal parameter q є [1,∞]. At that,the equipartition law is shown to take place. Optimization of the multifractal spectrum function f(d) arrives at the relation between the statistical weight and the system complexity. It is shown that the statistical weight exponent τ(q) can be modeled by hyperbolic tangent deformed in accordance with both Tsallis and Kaniadakis exponential functions to describe arbitrary multifractal phase space explicitly. The spectrum function f(d) is proved to increase monotonically from minimum value f=-1 at d=0 to maximum one f=1 at d=1. At the same time, the number of monofractals increases with the growth of the phase-space volume at small dimensions d and falls down in the limit d->1. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/275

    Розрахунок схеми електронного навантаження для тестування низьковольтних джерел

    Get PDF
    Purpose. The introduction of electronic load for testing high-precision low-voltage sources (solar panels) requires careful review not only of the circuit design, but also thermal and mechanical design. The article considers the principle of creating and calculating the optimal solution for the implementation of electronic load. Methodology. To achieve this goal, methods of analysis of modern electronic database, calculations of basic physical and electrical parameters and their modeling are used. Findings. Based on the considered physical and circuit solutions for the implementation of the electronic load unit, a corresponding electrical circuit was developed. The transistors are controlled by four unipolar operational amplifiers integrated into the LM324 chip. Control of the electronic load unit is implemented by controlling the voltage at the positive feedback terminals, which is further stabilized by the TL431 chip. The device is powered by a source of DC stabilized current of 12 V (provides additional filtering from voltage fluctuations). Originality. Modern advances in the development of solar cells and other low-voltage energy sources have led to the need to create compact and express systems for testing them, which cannot be implemented on existing solutions. Practical value. Adherence to the indications and principles set out in this article will provide the load with the ability to work at high power, while maintaining good performance and reliability. The developed scheme allows to create a compass device for express testing of solar panels.Цель работы. Внедрение электронной нагрузки для испытания высокоточных низковольтных источников (солнечных батарей) требует тщательного просмотра не только схемотехнической конструкции, но и теплотехнической и механической конструкции. В статье рассматривается принцип создания и расчета оптимального решения для реализации электронной нагрузки. Методы исследования. Для достижения цели используются методы анализа современной электронной базы, расчет основных физических и электрических параметров и их моделирование. Полученные результаты. На основе рассмотренных физико-схемных решений для реализации электронного блока нагрузки была разработана соответствующая электрическая схема. Транзисторы управляются четырьмя униполярными операционными усилителями, интегрированными в микросхему LM324. Управление электронным блоком нагрузки реализуется путем управления напряжением на клеммах положительной обратной связи, дополнительно стабилизируемой микросхемой TL431. Устройство питается от источника постоянного стабилизированного тока напряжением 12 В (обеспечивает дополнительную фильтрацию от колебаний напряжения). Научна новизна. Современные достижения в разработке солнечных элементов и других низковольтных источников энергии привели к необходимости создания компактных и экспрессных систем их тестирования, которые нельзя реализовать на существующих решениях. Практическая ценность. Соблюдение показаний и принципов, изложенных в этой статье, обеспечит нагрузке возможность работать на большой мощности, и при этом сохранить хорошие характеристики и надежность. Разработанная схема позволяет создать компасное устройство для экспрессного тестирования солнечных батарей.Мета роботи. Впровадження електронного навантаження для випробування високоточних низьковольтних джерел (сонячних батарей) вимагає ретельного перегляду не тільки схемотехнічної конструкції, а й теплотехнічної та механічної конструкції. У статті розглядається принцип створення та розрахунку оптимального рішення для реалізації електронного навантаження. Методологія. Для досягнення мети використовуються методи аналіза сучасної електронної бази, розрахунки основних фізичних та електричних параметрів та їх моделювання. Висновки. На основі розглянутих фізико-схемних рішень для реалізації електронного блоку навантаження була розроблена відповідна електрична схема. Транзистори керуються чотирма уніполярними операційними підсилювачами, інтегрованими в мікросхему LM324. Управління електронним блоком навантаження реалізується шляхом управління напругою на клемах позитивного зворотного зв'язку, яка додатково стабілізується мікросхемою TL431. Пристрій живиться від джерела постійного стабілізованого струму напругою 12 В (забезпечує додаткову фільтрацію від коливань напруги). Оригінальність.  Сучасні досягнення у розробці сонячних елементів та інших низьковольтних джерел енергії призвели до необхідності створення компактних та експресних систем їх тестування, котрі не можна реалізувати на існуючих рішеннях. Практичне значення. Дотримання показань і принципів, які викладені в цій статті, забезпечить навантаженню можливість працювати на великій потужності, і при цьому зберегти хороші характеристики і надійність. Розроблена схема дозволяє створити компасний пристрій експресного тестування сонячних батарей

    Ретроспективный алгоритм и ранние клинические результаты неотложной гемостатической хирургии для больных с верхним желудочно-кишечным кровотечением

    Get PDF
    Вступ. Жоден з лікувальних методів не гарантує ідеального гемостазу для хворого на шлунково-кишкову кровотечу. Оперативне втручання завжди вимушений шлях для деяких тяжких випадків. Дана робота презентує одноцентрове ретроспективне дослідження клінічних наслідків хірургічного гемостазу для хворих на верхню шлунково-кишкову кровотечу різної природи, також розроблено півформальний ретроспективний алгоритм (граф-схема зі словесним змістом). Пацієнти і методи. Ми спостерігали шістдесят одного хворого, прооперованого невідкладно з приводу неконтрольованої нетравматичної верхньої шлунково-кишкової кровотечі у Сумській обласній клінічній лікарні з 2009/01 по 2014/02. У заключний аналіз включено 58 осіб: «загальна» група (n = 58; усі верхні шлунково-кишкові кровотечі), «виразкова» група (n = 35; гастродуоденальні кровотечі з виразок і ерозій, в т.ч. оперованого шлунка) і «невиразкова» група (n = 23; рак шлунка, синдром Мелорі–Вейса, циротичний варикоз, перфоративна виразка, кровотеча зі стенозом). Результати. Клінічна ефективність хірургічного гемостазу була у 45 (78 %) осіб «загальної» групи, 28 (80 %) осіб з «Виразкової» групи та 17 (74 %) осіб з «невиразкової» групи. Післяопераційна летальність згідно груп була 22 %, 20 % та 26 %, відповідно. Показаннями до реоперації (n = 5; 9 % від усіх оперованих) стали рецидиви кровотечі (3 хворих) і перитоніт (2 хворих). Висновки. Застосований алгоритм дає спрощену схему клінічного сприйняття ранніх результатів оперативного лікування з прошивання та резекціями. Він слугуватиме аналітично-освітнім засобом для дизайну нових одно- та багатоцентрових високодоказових досліджень.Вступление. Ни один из лечебных методов не гарантирует идеальный гемостаз для больного с желудочно-кишечным кровотечением. Оперативное вмешательство всегда вынужденный путь в некоторых тяжелых случаях. Данная работа представляет одноцентровое ретроспективное исследование клинических результатов хирургического гемостаза для больных с верхним желудочнокишечным кровотечением разной природы, также разработан полуформальный ретроспективный алгоритм (граф-схема со словесным содержанием). Пациенты и методы. Шестьдесят один больной был прооперирован неотложно в связи с неконтролированным нетравматическим верхним желудочно-кишечным кровотечением в Сумской областной клинической больнице с 2009/01 по 2014/02. Для заключительного анализа включено 58 больных: «общая» группа (n = 58; все верхние желудочно-кишечные кровотечения), «язвенная» группа (n = 35; гастродуоденальные кровотечения из язв и эрозий, в т.ч. оперированного желудка) и «неязвенная» группа (n = 23; рак желудка, синдром Мелори–Вейса, циротический варикоз, перфоративная язва, кровотечение со стенозом). Результаты. Клиническая эффективность хирургического гемостаза была у 45 (78 %) больных «общей» группы, 28 (80 %) больных из «язвенной» группы и 17 (74 %) больных из «неязвенной» группы. Послеоперационная летальность согласно группам была 22 %, 20 % и 26 %, соответственно. Показаниями для реоперации (n = 5; 9 % всех оперированных) стали рецидивы кровотечения (3 больных) и перитонит (2 больных). Выводы. Использованный алгоритм дает упрощенную схему клинического восприятия ранних результатов оперативного лечения с прошиванием и резекциями. Он будет служит аналитикообразовательным средством для дизайна новых одно- и многоцен- тровых высокодоказательных исследований.Background. None of the therapeutic methods guarantee ideal haemostasis for a patient with gastrointestinal bleeding. An open surgical intervention is always recommended in certain difficult cases. This work presents a single-center retrospective study of clinical outcomes for surgical haemostasis in patients with upper gastrointestinal bleeding of a different nature, also with a development of the semi-formal nature’s retrospective algorithm (graph-scheme with word content). Patients and Methods. Sixty one patients were operated urgently for uncontrolled nontraumatic upper gastrointestinal bleedings in Sumy Regional Clinical Hospital between 2009/01 and 2014/02. In a final analysis included 58 persons: a «General» group (n = 58; all upper gastrointestinal bleedings), an «Ulcer bleedings» group (n = 35; gastroduodenal bleedings from ulcers or erosions, operated stomach’s ulcerserosions) and a «Nonulcer bleedings» group (n = 23; gastric cancer, Mallory –Weiss syndrome, cirrhotic varice, perforated ulcer, bleeding with obstruction). Results. The clinical effectiveness in the surgical haemostasis was in 45 (78 %) persons of the «general» group, among the «Ulcer bleedings » group in 28 (80 %) persons and the «Nonulcer bleedings» group in 17 (74 %) persons. The postoperative mortality according to the three groups occurred in 22 %, 20 % and 26 %, respectively. The indications for reoperation (9 % of total) were bleeding recurrences (3 patients) and peritonitis (2 patients)

    Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

    Jet size dependence of single jet suppression in lead-lead collisions at sqrt(s(NN)) = 2.76 TeV with the ATLAS detector at the LHC

    Get PDF
    Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at sqrt(s) = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |eta| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-kt algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," Rcp. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. Rcp varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.Comment: 15 pages plus author list (30 pages total), 8 figures, 2 tables, submitted to Physics Letters B. All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HION-2011-02

    Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

    Get PDF
    We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

    Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

    Get PDF
    This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio
    corecore