757 research outputs found

    Fitting multilevel models in complex survey data with design weights: Recommendations

    Get PDF
    Abstract Background Multilevel models (MLM) offer complex survey data analysts a unique approach to understanding individual and contextual determinants of public health. However, little summarized guidance exists with regard to fitting MLM in complex survey data with design weights. Simulation work suggests that analysts should scale design weights using two methods and fit the MLM using unweighted and scaled-weighted data. This article examines the performance of scaled-weighted and unweighted analyses across a variety of MLM and software programs. Methods Using data from the 2005–2006 National Survey of Children with Special Health Care Needs (NS-CSHCN: n = 40,723) that collected data from children clustered within states, I examine the performance of scaling methods across outcome type (categorical vs. continuous), model type (level-1, level-2, or combined), and software (Mplus, MLwiN, and GLLAMM). Results Scaled weighted estimates and standard errors differed slightly from unweighted analyses, agreeing more with each other than with unweighted analyses. However, observed differences were minimal and did not lead to different inferential conclusions. Likewise, results demonstrated minimal differences across software programs, increasing confidence in results and inferential conclusions independent of software choice. Conclusion If including design weights in MLM, analysts should scale the weights and use software that properly includes the scaled weights in the estimation.</p

    Distinguishing Asthma Phenotypes Using Machine Learning Approaches.

    Get PDF
    Asthma is not a single disease, but an umbrella term for a number of distinct diseases, each of which are caused by a distinct underlying pathophysiological mechanism. These discrete disease entities are often labelled as asthma endotypes. The discovery of different asthma subtypes has moved from subjective approaches in which putative phenotypes are assigned by experts to data-driven ones which incorporate machine learning. This review focuses on the methodological developments of one such machine learning technique-latent class analysis-and how it has contributed to distinguishing asthma and wheezing subtypes in childhood. It also gives a clinical perspective, presenting the findings of studies from the past 5 years that used this approach. The identification of true asthma endotypes may be a crucial step towards understanding their distinct pathophysiological mechanisms, which could ultimately lead to more precise prevention strategies, identification of novel therapeutic targets and the development of effective personalized therapies

    A re-randomisation design for clinical trials

    Get PDF
    Background: Recruitment to clinical trials is often problematic, with many trials failing to recruit to their target sample size. As a result, patient care may be based on suboptimal evidence from underpowered trials or non-randomised studies. Methods: For many conditions patients will require treatment on several occasions, for example, to treat symptoms of an underlying chronic condition (such as migraines, where treatment is required each time a new episode occurs), or until they achieve treatment success (such as fertility, where patients undergo treatment on multiple occasions until they become pregnant). We describe a re-randomisation design for these scenarios, which allows each patient to be independently randomised on multiple occasions. We discuss the circumstances in which this design can be used. Results: The re-randomisation design will give asymptotically unbiased estimates of treatment effect and correct type I error rates under the following conditions: (a) patients are only re-randomised after the follow-up period from their previous randomisation is complete; (b) randomisations for the same patient are performed independently; and (c) the treatment effect is constant across all randomisations. Provided the analysis accounts for correlation between observations from the same patient, this design will typically have higher power than a parallel group trial with an equivalent number of observations. Conclusions: If used appropriately, the re-randomisation design can increase the recruitment rate for clinical trials while still providing an unbiased estimate of treatment effect and correct type I error rates. In many situations, it can increase the power compared to a parallel group design with an equivalent number of observations

    Pattern and determinants of hospitalization during heat waves: an ecologic study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Numerous studies have investigated mortality during a heatwave, while few have quantified heat associated morbidity. Our aim was to investigate the relationship between hospital admissions and intensity, duration and timing of heatwave across the summer months.</p> <p>Methods</p> <p>The study area (Veneto Region, Italy) holds 4577408 inhabitants (on January 1<sup>st</sup>, 2003), and is subdivided in seven provinces with 60 hospitals and about 20000 beds for acute care. Five consecutive heatwaves (three or more consecutive days with Humidex above 40°C) occurred during summer 2002 and 2003 in the region. From the regional computerized archive of hospital discharge records, we extracted the daily count of hospital admissions for people aged ≥75, from June 1 through August 31 in 2002 and 2003. Among people aged over 74 years, daily hospital admissions for disorders of fluid and electrolyte balance, acute renal failure, and heat stroke (grouped in a single nosologic entity, heat diseases, HD), respiratory diseases (RD), circulatory diseases (CD), and a reference category chosen a priori (fractures of the femur, FF) were independently analyzed by Generalized Estimating Equations.</p> <p>Results</p> <p>Heatwave duration, not intensity, increased the risk of hospital admissions for HD and RD by, respectively, 16% (p < .0001) and 5% (p < .0001) with each additional day of heatwave duration. At least four consecutive hot humid days were required to observe a major increase in hospital admissions, the excesses being more than twofold for HD (p < .0001) and about 50% for RD (p < .0001). Hospital admissions for HD peaked equally at the first heatwave (early June) and last heatwave (August) in 2004 as did RD. No correlation was found for FF or CD admissions.</p> <p>Conclusion</p> <p>The first four days of an heatwave had only minor effects, thus supporting heat health systems where alerts are based on duration of hot humid days. Although the finding is based on a single late summer heatwave, adaptations to extreme temperature in late summer seem to be unlikely.</p

    Observation of associated near-side and away-side long-range correlations in √sNN=5.02  TeV proton-lead collisions with the ATLAS detector

    Get PDF
    Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

    Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

    Get PDF
    Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

    Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

    Get PDF
    This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}andcorrespondtoanintegratedluminosityof and correspond to an integrated luminosity of 4.6\;{\rm f}{{{\rm b}}^{-1}}.ThemeasurementisperformedbyreconstructingtheboostedWorZbosonsinsinglejets.ThereconstructedjetmassisusedtoidentifytheWandZbosons,andajetsubstructuremethodbasedonenergyclusterinformationinthejetcentreofmassframeisusedtosuppressthelargemultijetbackground.ThecrosssectionforeventswithahadronicallydecayingWorZboson,withtransversemomentum. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum {{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}andpseudorapidity and pseudorapidity |\eta |\lt 1.9,ismeasuredtobe, is measured to be {{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

    Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

    Get PDF
    The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV
    corecore