HIL-validation of an extremum seeking-based controller for advanced der management

Paradigm shifts in electricity generation are leading to more renewable and distributed energy resources (DER) on the grid. There is a strong interest to utilize these resources for various grid services, but the practicality of commanding multiple DER is often an obstacle to such approaches. In this article, we seek to validate through Hardware-in-the-Loop (HIL) simulation an extremum seeking (ES) based control scheme proposed in previous work. The method aggregates and coordinates multiple distributed controllers to offer transmission grid level services. The HIL validation uses a prototype real-time implementation of the controller's logic on distributed devices and photovoltaic (PV) inverters operating on a simulated utility distribution feeder. Several grid services, including load following and voltage regulation, were validated to demonstrate the deployment feasibility of the ES control approach on equipment already installed on the grid

Preliminary development and validation of a new endof-life patient-reported outcome measure assessing the ability of patients to finalise their affairs at the end of life

Introduction:The ability of patients to finalise their affairs at the end of life is an often neglected aspect of quality of life (QOL) measurement in palliative care effectiveness research despite compelling evidence of the high value patients place on this domain. Objective: This paper describes the preliminary development and evaluation of a new, single-item, end-of-life patientreported outcome measure (EOLPRO) designed to capture changes in the ability of patients to finalise their affairs at the end of life. Methods: Cognitive interviews with purposively sampled Australian palliative care patients (N = 9) were analysed thematically to explore content validity. Simultaneously, secondary analysis of data from a randomised controlled trial comparing ketamine and placebo for the management of cancer pain (N = 185) evaluated: construct validity; test-retest reliability; and responsiveness. Results:Preliminary findings suggest patients interpret the new measure consistently. The EOLPRO captures the ability to complete physical tasks and finalise practical matters although it is unclear whether emotional tasks or resolution of relationship issues are considered. Personal and financial affairs should be separated to allow for differences in ability for these two types of affairs. The significant correlation between performance status and EOLPRO scores (r = 0.41, p,<.01, n = 137) and expected relationships between EOLPRO and proximity to death and constipation demonstrated construct validity. Pre-and post-treatment EOLPRO scores moderately agreed (n = 14, k = 0.52 [95% CI 0.19, 0.84]) supporting reliability. The measure's apparent lack of sensitivity to discriminate between treatment responders and non-responders may be confounded. Conclusion:Based on the preliminary findings, the EOLPRO should be separated into 'personal' and 'financial' affairs with further testing suggested, particularly to verify coverage and responsiveness. Initial evaluation suggests that the single-item EOLPRO is a useful addition to QOL outcome measurement in palliative care effectiveness research because common palliative care specific QOL questionnaires do not include or explicitly capture this domain. © 2014 McCaffrey et al

Exploring older adult needs and preferences for technology-assisted group music-making. A qualitative analysis of data collected during the participatory user-centred design process

Purpose: Engagement with arts, recreation and leisure is highly valued by older adults, with positive links to their continued wellbeing. Despite an availability of new music technology, these devices are rarely designed with older adults in mind. This project explores the needs and preferences of older adults in residential care as they interact with digital music interfaces in a group music-making context. Materials and methods: Twenty participants at an Australian residential aged-care facility were involved in a user-centred design process (20 sessions across six months) to develop digital music interfaces suitable for group music-making. Participants’ verbal comments were audio-recorded and transcribed, supported by further written observation notes made by the activity facilitators. Results: A hybrid inductive and deductive approach to thematic analysis revealed three main themes: individual music-making, ensemble music-making and social engagement. Our results suggest that when interfaces are designed with older adults in mind, technology-assisted group music-making can facilitate bringing together residents with different experiences and abilities. Conclusions: These findings suggest implications for rehabilitation in developing a range of musical devices for older adults to account for required flexibility, whilst maintaining an appropriate and satisfyingly “rich” musical outcome.Implications for rehabilitation Older adults positively engage with music technology, showing distinct personal preferences for aspects of physical interaction, balance and quality of sound. Rehabilitation and/or wellbeing-based musical activities for older adults in residential care may benefit from considering tools that allow for personal adaptations such as these to be made. Preferences for musical interaction can be influenced by previous musical experiences, as well as physical and/or cognitive abilities. However, on any given day musical preferences can also be subject to change. Within a group music-making context, there is a significant capacity for older adults to feel agency in contributing to the overall sound; rehabilitation activities and/or technologies could be designed where this individual contribution to the group can be enhanced. Group music-making using new digital music interfaces has the potential to encourage interpersonal social connections that are most likely made over repeated sessions

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Searches for exclusive Higgs and Z boson decays into J/ψγ,ψ(2S)γ,and Υ(nS)γ at √s=13 TeV with the ATLAS detector

Searches for the exclusive decays of the Higgs and Z bosons into a J/ψ,ψ(2S), or Υ(nS)(n=1,2,3) meson and a photon are performed with a pp collision data sample corresponding to an integrated luminosity of 36.1 fb −1 collected at √s =13 TeV with the ATLAS detector at the CERN Large Hadron Collider. No significant excess of events is observed above the expected backgrounds, and 95% confidence-level upper limits on the branching fractions of the Higgs boson decays to J/ψγ, ψ(2S)γ,and Υ(nS)γ of 3.5×10 −4, 2.0×10−3,and(4.9,5.9,5.7)×10 −4,respectively, are obtained assuming Standard Model production. The corresponding 95% confidence-level upper limits for the branching fractions of the Z boson decays are 2.3×10 −6, 4.5×10 −6 and (2.8,1.7,4.8)×10 −6, respectively

Measurements of long-range azimuthal anisotropies and associated Fourier coefficients for pp collisions at √s=5.02 and 13 TeV and p+Pb collisions at √sNN=5.02 TeV with the ATLAS detector

ATLAS measurements of two-particle correlations are presented for √s=5.02 and 13 TeV ppcollisions and for √sNN=5.02 TeV p+Pb collisions at the LHC. The correlation functions are measured as a function of relative azimuthal angle Δϕ, and pseudorapidity separation Δη, using charged particles detected within the pseudorapidity interval |η|2, is studied using a template fitting procedure to remove a “back-to-back” contribution to the correlation function that primarily arises from hard-scattering processes. In addition to the elliptic, cos (2Δϕ), modulation observed in a previous measurement, the pp correlation functions exhibit significant cos (3Δϕ) and cos (4Δϕ) modulation. The Fourier coefficients vn, n associated with the cos (nΔϕ) modulation of the correlation functions for n=2–4 are measured as a function of charged-particle multiplicity and charged-particle transverse momentum. The Fourier coefficients are observed to be compatible with cos (nϕ) modulation of per-event single-particle azimuthal angle distributions. The single-particle Fourier coefficients vn are measured as a function of charged-particle multiplicity, and charged-particle transverse momentum for n=2–4. The integrated luminosities used in this analysis are, 64nb−1 for the √s=13 TeV pp data, 170 nb−1 for the √ s = 5.02 TeV pp data, and 28 nb−1 for the √sNN = 5.02 TeV p+Pb data

Search for Higgs bosons produced via vector-boson fusion and decaying into bottom quark pairs in √s =13 TeV pp collisions with the ATLAS detector

A search for the bb ¯ decay of the Standard Model Higgs boson produced through vector-boson fusion is presented. Three mutually exclusive channels are considered: two all-hadronic channels and a photon-associated channel. Results are reported from the analysis of up to 30.6 fb −1 of pp data at s √ =13 TeV collected with the ATLAS detector at the LHC. The measured signal strength relative to the Standard Model prediction from the combined analysis is 2.5 +1.4 −1.3 for inclusive Higgs boson production and 3.0 +1.7 −1.6 for vector-boson fusion production only

Measurement of jet fragmentation in Pb+Pb and pp collisions at √s NN =5.02 TeV with the ATLAS detector

This paper presents a measurement of jet fragmentation functions in 0.49 nb −1 of Pb+Pb collisions and 25 pb −1 of pp collisions at √ sNN =5.02 TeV collected in 2015 with the ATLAS detector at the LHC. These measurements provide insight into the jet quenching process in the quark-gluon plasma created in the aftermath of ultra-relativistic collisions between two nuclei. The modifications to the jet fragmentation functions are quantified by dividing the measurements in Pb+Pb collisions by baseline measurements in pp collisions. This ratio is studied as a function of the transverse momentum of the jet, the jet rapidity, and the centrality of the collision. In both collision systems, the jet fragmentation functions are measured for jets with transverse momentum between 126 GeV and 398 GeV and with an absolute value of jet rapidity less than 2.1. An enhancement of particles carrying a small fraction of the jet momentum is observed, which increases with centrality and with increasing jet transverse momentum. Yields of particles carrying a very large fraction of the jet momentum are also observed to be enhanced. Between these two enhancements of the fragmentation functions a suppression of particles carrying an intermediate fraction of the jet momentum is observed in Pb+Pb collisions. A small dependence of the modifications on jet rapidity is observed

Search for pair production of heavy vector-like quarks decaying into high-pT W bosons and top quarks in the lepton-plus-jets final state in pp collisions at √s = 13 TeV with the ATLAS detector

A search is presented for the pair production of heavy vector-like B quarks, primarily targeting B quark decays into a W boson and a top quark. The search is based on 36.1 fb −1 of pp collisions at √s = 13 TeV recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Data are analysed in the lepton-plus-jets final state, characterised by a high-transverse-momentum isolated electron or muon, large missing transverse momentum, and multiple jets, of which at least one is b -tagged. No significant deviation from the Standard Model expectation is observed. The 95% confidence level lower limit on the B mass is 1350 GeV assuming a 100% branching ratio to Wt. In the SU(2) singlet scenario, the lower mass limit is 1170 GeV. This search is also sensitive to a heavy vector-like B quark decaying into other final states (Zb and Hb ) and thus mass limits on B production are set as a function of the decay branching ratios. The 100% branching ratio limits are found to be also applicable to heavy vector-like X production, with charge +5/3, that decay into Wt