Properties and hydration behavior of blended clinker and portland-sediment cement pastes

In recent years, an increase of the interest in the use of secondary raw materials (sediment, sludge…) in construction has been observed.  This paper aims to contribute to the use of dredging sediments in the cement industry. Despite the literature on this subject, the available data on the aspects and phenomena related to the hydration process of such mixtures are incomplete. This paper aims to specify the calorimetric curves of hydration of mixtures made, from the sediment trapped at the site of Lyvet in the Brittany region of France. The mixtures are made ??using in one hand clinker and in the other hand Portland cement. Pastes with 8%, 16% and 33% of clinker or Portland cement substituted by sediment are used to determine the hydraulic properties of mixtures. The physico-chemical characterization of materials is made by different techniques to determine the chemical composition and physical properties. X-ray diffraction is used to determine the mineralogical compositions of samples before and after treatment. A  Tian-Calvet microcalorimeter is used to explore hydration behavior of the blended Sediment-Portland cement pastes. The addition of untreated sediment to both clinker or Portland cement increase the dormant period duration. On the contrary, this period becomes shorter when the sediment is thermally treated. The results show that 8% of treated sediment improve hydration of blended Sediment-Portland cement pastes. Mechanical properties of blended sediment-cements are also investigated. After 28 days of curing in water, the mortar containing 8% of treated sediment exhibits a compressive strength equal to 93.7% of the one of the reference mortar, maintaining it in the same cement class (52.5)

Electrochemical copper recovery from galvanic sludge

The feasibility of recovering copper from electronic industrial waste mud (galvanic sludge) using a combination of leaching and electrowinning has been examined. Leaching with sulfuric acid was found to be the most efficient and cost-effective way of extracting the copper from the sludge, and the optimum acid concentration and time were determined. The copper was then extracted by electrowinning in a batch recirculation electrochemical reactor (Porocell™) employing a three-dimensional carbon felt cathode. The influence of applied current, flow rate and the presence of other metal ion contaminates on the rate and current efficiency of copper electrowinning was investigated. An analysis of the experimental data showed that the current efficiency was lower than unity even though the limiting current for copper deposition was not exceeded. This low current efficiency was attributed to the occurrence of a side reaction, most likely the reduction of dissolved oxygen or oxygen-induced corrosion. The influence of this side reaction can be minimized by operating at relatively high currents and low flow rates

Collectivity Embedded in Complex Spectra of Finite Interacting Fermi Systems: Nuclear Example

The mechanism of collectivity coexisting with chaos in a finite system of strongly interacting fermions is investigated. The complex spectra are represented in the basis of two-particle two-hole states describing the nuclear double-charge exchange modes in $^{48}$Ca. An example of $J^{\pi}=0^-$ excitations shows that the residual interaction, which generically implies chaotic behavior, under certain specific and well identified conditions may create strong transitions, even much stronger than those corresponding to a pure mean-field picture. Such an effect results from correlations among the off-diagonal matrix elements, is connected with locally reduced density of states and a local minimum in the information entropy.Comment: 16 pages, LaTeX2e, REVTeX, 8 PostScript figures, to appear in Physical Review

Association between initial use of e-cigarettes and subsequent cigarette smoking among adolescents and young adults a systematic review and meta-analysis

IMPORTANCE The public health implications of e-cigarettes depend, in part, on whether e-cigarette use affects the risk of cigarette smoking. OBJECTIVE To perform a systematic review and meta-analysis of longitudinal studies that assessed initial use of e-cigarettes and subsequent cigarette smoking. DATA SOURCES PubMed, EMBASE, Cochrane Library,Web of Science, the 2016 Society for Research on Nicotine and Tobacco 22nd Annual Meeting abstracts, the 2016 Society of Behavioral Medicine 37th Annual Meeting & Scientific Sessions abstracts, and the 2016 National Institutes of Health Tobacco Regulatory Science Program Conference were searched between February 7 and February 17, 2017. The search included indexed terms and text words to capture concepts associated with e-cigarettes and traditional cigarettes in articles published from database inception to the date of the search. STUDY SELECTION Longitudinal studies reporting odds ratios for cigarette smoking initiation associated with ever use of e-cigarettes or past 30-day cigarette smoking associated with past 30-day e-cigarette use. Searches yielded 6959 unique studies, of which 9met inclusion criteria (comprising 17 389 adolescents and young adults). DATA EXTRACTION AND SYNTHESIS Study quality and risk of biaswere assessed using the Newcastle-Ottawa Scale and the Risk of Bias in Non-randomized Studies of Interventions tool, respectively. Data and estimates were pooled using random-effects meta-analysis. MAIN OUTCOMES AND MEASURES Among baseline never cigarette smokers, cigarette smoking initiation between baseline and follow-up. Among baseline non-past 30-day cigarette smokers who were past 30-day e-cigarette users, past 30-day cigarette smoking at follow-up. RESULTS Among 17 389 adolescents and young adults, the ages ranged between 14 and 30 years at baseline, and 56.0%were female. The pooled probabilities of cigarette smoking initiationwere 30.4%for baseline ever e-cigarette users and 7.9%for baseline never e-cigarette users. The pooled probabilities of past 30-day cigarette smoking at follow-upwere 21.5%for baseline past 30-day e-cigarette users and 4.6%for baseline non-past 30-day e-cigarette users. Adjusting for knowndemographic, psychosocial, and behavioral risk factors for cigarette smoking, the pooled odds ratio for subsequent cigarette smoking initiationwas 3.62 (95%CI, 2.42-5.41) for ever vs never e-cigarette users, and the pooled odds ratio for past 30-day cigarette smoking at follow-up was 4.28 (95%CI, 2.52-7.27) for past 30-day e-cigarette vs non-past 30-day e-cigarette users at baseline.Amoderate level of heterogeneitywas observed among studies (I2 = 60.1%). CONCLUSIONS AND RELEVANCE e-Cigarette use was associated with greater risk for subsequent cigarette smoking initiation and past 30-day cigarette smoking. Strong e-cigarette regulation could potentially curb use among youth and possibly limit the future population-level burden of cigarette smoking

Anisotropy studies around the galactic centre at EeV energies with the Auger Observatory

Data from the Pierre Auger Observatory are analyzed to search for anisotropies near the direction of the Galactic Centre at EeV energies. The exposure of the surface array in this part of the sky is already significantly larger than that of the fore-runner experiments. Our results do not support previous findings of localized excesses in the AGASA and SUGAR data. We set an upper bound on a point-like flux of cosmic rays arriving from the Galactic Centre which excludes several scenarios predicting sources of EeV neutrons from Sagittarius $A$. Also the events detected simultaneously by the surface and fluorescence detectors (the `hybrid' data set), which have better pointing accuracy but are less numerous than those of the surface array alone, do not show any significant localized excess from this direction.Comment: Matches published versio

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC

A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions

Search for resonances in the mass distribution of jet pairs with one or two jets identified as b-jets in proton–proton collisions at √s=13TeV with the ATLAS detector

Searches for high-mass resonances in the dijet invariant mass spectrum with one or two jets identi-fied as b-jets are performed using an integrated luminosity of 3.2fb−1of proton–proton collisions with a centre-of-mass energy of √s=13TeVrecorded by the ATLAS detector at the Large Hadron Collider. Noevidence of anomalous phenomena is observed in the data, which are used to exclude, at 95%credibility level, excited b∗quarks with masses from 1.1TeVto 2.1TeVand leptophobic Z bosons with masses from 1.1TeVto 1.5TeV. Contributions of a Gaussian signal shape with effective cross sections ranging from approximately 0.4 to 0.001pb are also excluded in the mass range 1.5–5.0TeV

Measurements of fiducial cross-sections for t\bart production with one or two additional b-jets in pp collisions at √s =8 TeVusing the ATLAS detector

Fiducial cross-sections for $t\bar{t}$ production with one or two additional $b$-jets are reported, using an integrated luminosity of 20.3 fb$^{-1}$ of proton--proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for $t\bar{t}$ events with at least one additional $b$-jet is measured to be 950 $\pm$ 70 (stat.) $^{+240}_{-190}$ (syst.) fb in the lepton-plus-jets channel and 50 $\pm$ 10 (stat.) $^{+15}_{-10}$ (syst.) fb in the $e \mu$ channel. The cross-section times branching ratio for events with at least two additional $b$-jets is measured to be 19.3 $\pm$ 3.5 (stat.) $\pm$ 5.7 (syst.) fb in the dilepton channel ($e \mu$,\,$\mu\mu$, and \,$ee$) using a method based on tight selection criteria, and 13.5 $\pm$ 3.3 (stat.) $\pm$ 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 $\pm$ 0.33 (stat.) $\pm$ 0.28 (syst.)\% for the ratio of $t\bar{t}$ production with two additional $b$-jets to $t\bar{t}$ production with any two additional jets. All measurements are in good agreement with recent theory predictions.Comment: 41 pages plus author list + cover page (58 total), 9 Figures, 16 tables, submitted to EPJC, all figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2014-10