PD-1 blockade in recurrent or metastatic cervical cancer: Data from cemiplimab phase I expansion cohorts and characterization of PD-L1 expression in cervical cancer

Objectives: To characterize the safety, tolerability, and anti-tumor activity of cemiplimab as monotherapy or in combination with hypofractionated radiation therapy (hfRT) in patients with recurrent or metastatic cervical cancer. To determine the association between histology and programmed death-ligand 1 (PD-L1) expression. Methods: In non-randomized phase I expansion cohorts, patients (squamous or non-squamous histology) received cemiplimab 3 mg/kg intravenously every 2 weeks for 48 weeks, either alone (monotherapy cohort) or with hfRT during week 2 (combination cohort). Due to insufficient tissue material, PD-L1 protein expression was evaluated in commercially purchased samples and mRNA expression levels were analyzed from The Cancer Genome Atlas (TCGA). Results: Twenty patients enrolled in both cohorts in total; 10 had squamous histology. The most common adverse events of any grade were diarrhea, fatigue, and hypokalemia, occurring in 35%, 25%, and 25%, respectively. Objective response rate was 10% in each cohort; responders had squamous histology. Duration of response was 11.2 months and 6.4 months for the responder in the monotherapy and combination cohort, respectively. Irradiated lesions were not included in the response assessments. In separate archived specimens (N = 155), PD-L1 protein expression in tumor and immune cells was negative (<1%) more commonly in adenocarcinoma than in squamous tumors. PD-L1 mRNA levels were lower in adenocarcinoma than squamous cell tumors (1.2 vs 5.0 mean transcripts per million, respectively) in TCGA. Conclusions: Cemiplimab has activity in cervical squamous cell carcinoma. The phase I results, combined with results from other anti-PD-1 trials in cervical cancer and our biomarker analyses have informed the design of the ongoing phase III trial, with the primary overall survival hierarchical analyses being done first in patients with squamous histology

Editor's Choice - Infective Native Aortic Aneurysms: A Delphi Consensus Document on Terminology, Definition, Classification, Diagnosis, and Reporting Standards.

There is no consensus regarding the terminology, definition, classification, diagnostic criteria, and algorithm, or reporting standards for the disease of infective native aortic aneurysm (INAA), previously known as mycotic aneurysm. The aim of this study was to establish this by performing a consensus study. The Delphi methodology was used. Thirty-seven international experts were invited via mail to participate. Four two week Delphi rounds were performed, using an online questionnaire, initially with 22 statements and nine reporting items. The panellists rated the statements on a five point Likert scale. Comments on statements were analysed, statements revised, and results presented in iterative rounds. Consensus was defined as ≥ 75% of the panel selecting "strongly agree" or "agree" on the Likert scale, and consensus on the final assessment was defined as Cronbach's alpha coefficient &gt; .80. All 38 panellists completed all four rounds, resulting in 100% participation and agreement that this study was necessary, and the term INAA was agreed to be optimal. Three more statements were added based on the results and comments of the panel, resulting in a final 25 statements and nine reporting items. All 25 statements reached an agreement of ≥ 87%, and all nine reporting items reached an agreement of 100%. The Cronbach's alpha increased for each consecutive round (round 1 = .84, round 2 = .87, round 3 = .90, and round 4 = .92). Thus, consensus was reached for all statements and reporting items. This Delphi study established the first consensus document on INAA regarding terminology, definition, classification, diagnostic criteria, and algorithm, as well as reporting standards. The results of this study create essential conditions for scientific research on this disease. The presented consensus will need future amendments in accordance with newly acquired knowledge

TRY plant trait database – enhanced coverage and open access

Plant traits—the morphological, anatomical, physiological, biochemical and phenological characteristics of plants—determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait‐based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits—almost complete coverage for ‘plant growth form’. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait–environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives

Centrality Dependence Of The Pseudorapidity Density Distribution For Charged Particles In Pb-pb Collisions At √snn=2.76tev

7264/Mai61062

Combination of searches for Higgs boson pairs in pp collisions at \sqrts = 13 TeV with the ATLAS detector

This letter presents a combination of searches for Higgs boson pair production using up to 36.1 fb(-1) of proton-proton collision data at a centre-of-mass energy root s = 13 TeV recorded with the ATLAS detector at the LHC. The combination is performed using six analyses searching for Higgs boson pairs decaying into the b (b) over barb (b) over bar, b (b) over barW(+)W(-), b (b) over bar tau(+)tau(-), W+W-W+W-, b (b) over bar gamma gamma and W+W-gamma gamma final states. Results are presented for non-resonant and resonant Higgs boson pair production modes. No statistically significant excess in data above the Standard Model predictions is found. The combined observed (expected) limit at 95% confidence level on the non-resonant Higgs boson pair production cross-section is 6.9 (10) times the predicted Standard Model cross-section. Limits are also set on the ratio (kappa(lambda)) of the Higgs boson self-coupling to its Standard Model value. This ratio is constrained at 95% confidence level in observation (expectation) to -5.0 &lt; kappa(lambda) &lt; 12.0 (-5.8 &lt; kappa(lambda) &lt; 12.0). In addition, limits are set on the production of narrow scalar resonances and spin-2 Kaluza-Klein Randall-Sundrum gravitons. Exclusion regions are also provided in the parameter space of the habemus Minimal Supersymmetric Standard Model and the Electroweak Singlet Model. For complete list of authors see http://dx.doi.org/10.1016/j.physletb.2019.135103</p

Searches for lepton-flavour-violating decays of the Higgs boson in s=13\sqrt{s}=13 TeV pp\mathit{pp} collisions with the ATLAS detector

This Letter presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ , performed with the ATLAS detector at the LHC. The searches are based on a data sample of proton–proton collisions at a centre-of-mass energy √s = 13 TeV, corresponding to an integrated luminosity of 36.1 fb−1. No significant excess is observed above the expected background from Standard Model processes. The observed (median expected) 95% confidence-level upper limits on the leptonflavour-violating branching ratios are 0.47% (0.34+0.13−0.10%) and 0.28% (0.37+0.14−0.10%) for H → eτ and H → μτ , respectively.publishedVersio

Search for flavour-changing neutral currents in processes with one top quark and a photon using 81 fb⁻¹ of pp collisions at \sqrts = 13 TeV with the ATLAS experiment

A search for flavour-changing neutral current (FCNC) events via the coupling of a top quark, a photon, and an up or charm quark is presented using 81 fb−1 of proton–proton collision data taken at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Events with a photon, an electron or muon, a b-tagged jet, and missing transverse momentum are selected. A neural network based on kinematic variables differentiates between events from signal and background processes. The data are consistent with the background-only hypothesis, and limits are set on the strength of the tqγ coupling in an effective field theory. These are also interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tuγ coupling of 36 fb (78 fb) and on the branching ratio for t→γu of 2.8×10−5 (6.1×10−5). In addition, they are interpreted as 95% CL upper limits on the cross section for FCNC tγ production via a left-handed (right-handed) tcγ coupling of 40 fb (33 fb) and on the branching ratio for t→γc of 22×10−5 (18×10−5). © 2019 The Author(s

Elliptic flow of identified hadrons in Pb-Pb collisions at 1asNN = 2.76 TeV

The elliptic flow coefficient (v2) of identified particles in Pb-Pb collisions at 1asNN = 2.76 TeV was measured with the ALICE detector at the Large Hadron Collider (LHC). The results were obtained with the Scalar Product method, a two-particle corre- lation technique, using a pseudo-rapidity gap of | 06\u3b7| > 0.9 between the identified hadron under study and the reference particles. The v2 is reported for \u3c0\ub1, K\ub1, K0S, p+p, \u3c6, \u39b+\u39b, \u39e 12+\u39e+ and \u3a9 12+\u3a9+ in several collision centralities. In the low transverse momentum (pT) region, pT 3 GeV/c

ROLE OF SOLVENT DEASPHALTING IN PROCESSING PETROLEUM RESIDUES IN REFINERIES

Solvent Oeasphalting (SOA) is basically a liquid-liquid extraction process. The conventional applications are in producing extra heavy viscosity grade lube oils called bright stock/cylinder oils and in upgrading bottom of barrel by recovering incremental/ additional feedstocks from vacuum residues for secondary conversion units like Fluid CatalyticCracking/Hydrocracking. Some newer applicationsinclude making of quality bitumen from waxy crudes, low sulpher fuel oils etc. Industrially,propane, butane and pentane (C3-CJ solvents, either alone or there combinationsfor greater flexibility,are being used widely. To improve the process economics, novel features like supercritical solvent recovery, better counter current columns, etc. are being incorporatedin existing and new grass-root deasphalting plants. The SOA process in combination with thermal cracking processes etc. is further contributing in reducing the availabilityof short/vacuum residues in refinerie

Some Furfural Group of Solvents for the Extraction of Aromatics

Three furfural group of solvents have been tried for the separation of aromatics from non-aromatics by extraction. The performance of the solvents has been compared in respect of their selectivities, capacities and phase equilbrium diagrams