Supersymmetry and a rationale for small CP violating phases

We analyse the CP problem in the context of a supersymmetric extension of the standard model with universal strength of Yukawa couplings. A salient feature of these models is that the CP phases are constrained to be very small by the hierarchy of the quark masses, and the pattern of CKM mixing angles. This leads to a small amount of CP violation from the usual KM mechanism and a significant contribution from supersymmetry is required. Due to the large generation mixing in some of the supersymmetric interactions, the electric dipole moments impose severe constraints on the parameter space, forcing the trilinear couplings to be factorizable in matrix form. We find that the LL mass insertions give the dominant gluino contribution to saturate epsilon_K. The chargino contributions to epsilon'/epsilon are significant and can accommodate the experimental results. In this framework, the standard model gives a negligible contribution to the CP asymmetry in B-meson decay, a_{J/\psi K_s}. However, due to supersymmetric contributions to B_d-\bar{B}_d mixing, the recent large value of a_{J/\psi K_s} can be accommodated.Comment: 30 pages, 5 figures. Version to appear in Nucl. Phys.

Effect of Direct Laser Deposition on Microstructure and Mechanical Properties of 316L Stainless Steel

Direct laser deposition (DLD) is a modern prototyping manufacturing technology, which can directly build full-density and high-performance complex metal parts This paper presents an investigation of the influence different scanning strategy on microstructure and mechanical properties of DLD 316L stainless steel sample. The results showed that formation of fine equiaxed austenitic structure with average grain size of the dendritic cells in 1.2-1.7 μm. Inter-track idle time has directly influence on cooling rate, grain size and mechanical properties. It was shown that the decreasing of inter-track idle time from 4.37 to 0.75 s decreases the ultimate tensile strength from 729 to 686 MPa. For obtaining high mechanical properties of samples or recovering surfaces it is necessary to choose scanning strategy along the largest dimension of the detail.     Keywords: X-ray analysis; Electron microscopy; Stress/Strain measurements; Iron alloys; Laser/Powder methods

Optimization of Key Parameters Towards High Performance Perovskite Solar Cells

Here, we report important findings regarding underestimated parameters for the synthesis and fabrication of high-performance perovskite solar cells. These parameters include the effect of Fluorine-doped Tin Oxide (FTO) etching, FTO cleaning, the number of compact TiO 2 (c-TiO 2 ) layer, the number of mesoporous TiO 2 (m-TiO 2 ) layers and the aging time before Ag deposition. Our results demonstrated that etching of FTO substrate with Zn/HCl is an essential step and has a major effect on the solar cell's open circuit voltage (Voc), fill factor (FF) and power conversion efficiency (PCE). Furthermore, we demonstrate new and improved protocols for the complete cleaning of FTO substrates. Despite the use of sonication and plasma etching in previous cleaning techniques, SEM images clearly show black clouds in the samples, which may be due to residual Zn particles in the FTO grooves. Thus, a soft toothbrush was used with detergent before sonication to detach the remaining Zn particles. In addition, the optimum number of spin coated layers of compact and mesoporous TiO 2 precursors was investigated. We found that one mesoporous and two compact TiO 2 layers were required to obtain a homogenous pinhole-free compact layer. Consequently, we demonstrate that using these optimized device fabrication procedures, a high efficiency of 17.96% for 6 mol% Co 3+ -doped TiO 2 solar cells can be obtained in comparison to 16.98% for pristine TiO 2 -based cells. Such cells are particularly important for wearable applications that require a small area and a high energy

Ball on a beam: stabilization under saturated input control with large basin of attraction

This article is devoted to the stabilization of two underactuated planar systems, the well-known straight beam-and-ball system and an original circular beam-and-ball system. The feedback control for each system is designed, using the Jordan form of its model, linearized near the unstable equilibrium. The limits on the voltage, fed to the motor, are taken into account explicitly. The straight beam-and-ball system has one unstable mode in the motion near the equilibrium point. The proposed control law ensures that the basin of attraction coincides with the controllability domain. The circular beam-and-ball system has two unstable modes near the equilibrium point. Therefore, this device, never considered in the past, is much more difficult to control than the straight beam-and-ball system. The main contribution is to propose a simple new control law, which ensures by adjusting its gain parameters that the basin of attraction arbitrarily can approach the controllability domain for the linear case. For both nonlinear systems, simulation results are presented to illustrate the efficiency of the designed nonlinear control laws and to determine the basin of attraction

Fermion Masses and Mixing in Intersecting Branes Scenarios

We study the structure of Yukawa couplings in intersecting D6-branes wrapping a factorizable 6-torus compact space T^6. Models with MSSM-like spectrum are analyzed and found to fail in predicting the quark mass spectrum because of the way in which the family structure for the left-handed, right-handed quarks and, eventually, the Higgses is `factorized' among the different tori. In order to circumvent this, we present a model with three supersymmetric Higgs doublets which satisfies the anomaly cancellation condition in a more natural way than the previous models, where quarks were not treated universally regarding their branes assignments, or some particular branes were singled out being invariant under orientifold projection. In our model, the family structures for the left, right quarks, left leptons and the Higgses arise from one of the tori and can naturally lead to universal strength Yukawa couplings which accommodate the quark mass hierarchy and the mixing angles.Comment: 21 pages, latex, matches the Phys. Rev. D versio

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio

Observation of a new chi_b state in radiative transitions to Upsilon(1S) and Upsilon(2S) at ATLAS

The chi_b(nP) quarkonium states are produced in proton-proton collisions at the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV and recorded by the ATLAS detector. Using a data sample corresponding to an integrated luminosity of 4.4 fb^-1, these states are reconstructed through their radiative decays to Upsilon(1S,2S) with Upsilon->mu+mu-. In addition to the mass peaks corresponding to the decay modes chi_b(1P,2P)->Upsilon(1S)gamma, a new structure centered at a mass of 10.530+/-0.005 (stat.)+/-0.009 (syst.) GeV is also observed, in both the Upsilon(1S)gamma and Upsilon(2S)gamma decay modes. This is interpreted as the chi_b(3P) system.Comment: 5 pages plus author list (18 pages total), 2 figures, 1 table, corrected author list, matches final version in Physical Review Letter

Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results