Substrate conformal imprint fabrication process of synthetic antiferromagnetic nanoplatelets

Methods to fabricate and characterize monodisperse magnetic nanoplatelets for fluid/bio-based applications based on spintronic thin-film principles are a challenge. This is due to the required top-down approach where the transfer of optimized blanket films to free particles in a fluid while preserving the magnetic properties is an uncharted field. Here, we explore the use of substrate conformal imprint lithography (SCIL) as a fast and cost-effective fabrication route. We analyze the size distribution of nominal 1.8 um and 120 nm diameter platelets and show the effect of the fabrication steps on the magnetic properties which we explain through changes in the dominant magnetization reversal mechanism as the size decreases. We show that SCIL allows for efficient large-scale platelet fabrication and discuss how application-specific requirements can be solved via process and material engineering

Magnetotransport properties of iron microwires fabricated by focused electron beam induced autocatalytic growth

We have prepared iron microwires in a combination of focused electron beam induced deposition (FEBID) and autocatalytic growth from the iron pentacarbonyl, Fe(CO)5, precursor gas under UHV conditions. The electrical transport properties of the microwires were investigated and it was found that the temperature dependence of the longitudinal resistivity (rhoxx) shows a typical metallic behaviour with a room temperature value of about 88 micro{\Omega} cm. In order to investigate the magnetotransport properties we have measured the isothermal Hall-resistivities in the range between 4.2 K and 260 K. From these measurements positive values for the ordinary and the anomalous Hall coefficients were derived. The relation between anomalous Hall resistivity (rhoAN) and longitudinal resistivity is quadratic, rhoAN rho^2 xx, revealing an intrinsic origin of the anomalous Hall effect. Finally, at low temperature in the transversal geometry a negative magnetoresistance of about 0.2 % was measured

Do tonic itch and pain stimuli draw attention towards their location?

Background. Although itch and pain are distinct experiences, both are unpleasant, may demand attention, and interfere with daily activities. Research investigating the role of attention in tonic itch and pain stimuli, particularly whether attention is drawn to the stimulus location, is scarce. Methods. In the somatosensory attention task, fifty-three healthy participants were exposed to 35-second electrical itch or pain stimuli on either the left or right wrist. Participants responded as quickly as possible to visual targets appearing at the stimulated location (ipsilateral trials) or the arm without stimulation (contralateral trials). During control blocks, participants performed the visual task without stimulation. Attention allocation at the itch and pain location is inferred when responses are faster ipsilaterally than contralaterally. Results. Results did not indicate that attention was directed towards or away from the itch and pain location. Notwithstanding, participants were slower during itch and pain than during control blocks. Conclusions. In contrast with our hypotheses, no indications were found for spatial attention allocation towards the somatosensory stimuli. This may relate to dynamic shifts in attention over the time course of the tonic sensations. Our secondary finding that itch and pain interfere with task performance is in-line with attention theories of bodily perception

Aging and passivation of magnetic properties in Co/Gd bilayers

Synthetic ferrimagnets based on Co and Gd bear promise for directly bridging the gap between volatile information in the photonic domain and non-volatile information in the magnetic domain, without the need for any intermediary electronic conversion. Specifically, these systems exhibit strong spin-orbit torque effects, fast domain wall motion and single-pulse all-optical switching of the magnetization. An important open challenge to bring these materials to the brink of applications is to achieve long-term stability of their magnetic properties. In this work, we address the time-evolution of the magnetic moment and compensation temperature of magnetron sputter grown Pt/Co/Gd trilayers with various capping layers. Over the course of three months, the net magnetic moment and compensation temperature change significantly, which we attribute to quenching of the Gd magnetization. We identify that intermixing of the capping layer and Gd is primarily responsible for this effect, which can be alleviated by choosing nitrides for capping as long as reduction of nitride to oxide is properly addressed. In short, this work provides an overview of the relevant aging effects that should be taken into account when designing synthetic ferrimagnets based on Co and Gd for spintronic applications.Comment: 9 pages, 5 figure

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30