Production of carbon nanotubes by PECVD and their applications to supercapacitors

Màster en Nanociència i NanotecnologiaPlasma enhanced chemical vapor deposition (PECVD) is a versatile technique to obtain vertically dense-aligned carbon nanotubes (CNTs) at lower temperatures than chemical vapor deposition (CVD). In this work, we used magnetron sputtering to deposit iron layer as a catalyst on silicon wafers. After that, radio frequency (rf) assisted PECVD reactor was used to grow CNTs. They were treated with water plasma and finally covered by MnO2 as dielectric layer in order to use CNTs as electrode for supercapacitors. Optimization of annealing time, reaction time and temperature, water plasma time and MnO2 deposition time were performed to find appropriate conditions to improve the characteristics of supercapacitors. SEM (Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), AFM (Atomic Force Microscopy) and Raman spectroscopy were used to characterize obtained electrodes

Tunable Resonant Raman Scattering from Singly Resonant Single Wall Carbon Nanotubes

We perform tunable resonant Raman scattering on 17 semiconducting and 7 metallic singly resonant single wall carbon nanotubes. The measured scattering cross-section as a function laser energy provides information about a tube's electronic structure, the lifetime of intermediate states involved in the scattering process and also energies of zone center optical phonons. Recording the scattered Raman signal as a function of tube location in the microscope focal plane allows us to construct two-dimensional spatial maps of singly resonant tubes. We also describe a spectral nanoscale artifact we have coined the "nano-slit effect"

Separation of specific single-enantiomer single-wall carbon nanotubes in the large-diameter regime

The enantiomer-level isolation of single-walled carbon nanotubes (SWCNTs) in high concentration and with high purity for nanotubes greater than 1.1 nm in diameter is demonstrated using a two-stage aqueous two-phase extraction (ATPE) technique. In total, five different nanotube species of ∼1.41 nm diameter are isolated, including both metallics and semiconductors. We characterize these populations by absorbance spectroscopy, circular dichroism spectroscopy, resonance Raman spectroscopy, and photoluminescence mapping, revealing and substantiating mod-dependent optical dependencies. Using knowledge of the competitive adsorption of surfactants to the SWCNTs that controls partitioning within the ATPE separation, we describe an advanced acid addition methodology that enables the fine control of the separation of these select nanotubes. Furthermore, we show that endohedral filling is a previously unrecognized but important factor to ensure a homogeneous starting material and further enhance the separation yield, with the best results for alkane-filled SWCNTs, followed by empty SWCNTs, with the intrinsic inhomogeneity of water-filled SWCNTs causing them to be worse for separations. Lastly, we demonstrate the potential use of these nanotubes in field-effect transistors

Systematic Determination of Absolute Absorption Cross-section of Individual Carbon Nanotubes

Determination of optical absorption cross-section is always among the central importance of understanding a material. However its realization on individual nanostructures, such as carbon nanotubes, is experimentally challenging due to the small extinction signal using conventional transmission measurements. Here we develop a technique based on polarization manipulation to enhance the sensitivity of single-nanotube absorption spectroscopy by two-orders of magnitude. We systematically determine absorption cross-section over broad spectral range at single-tube level for more than 50 chirality-defined single-walled nanotubes. Our data reveals chirality-dependent one-dimensional photo-physics through the behaviours of exciton oscillator strength and lifetime. We also establish an empirical formula to predict absorption spectrum of any nanotube, which provides the foundation to determine quantum efficiencies in important photoluminescence and photovoltaic processes

Thermal Conductivity of Carbon Nanotubes and their Polymer Nanocomposites: A Review

Thermally conductive polymer composites offer new possibilities for replacing metal parts in several applications, including power electronics, electric motors and generators, heat exchangers, etc., thanks to the polymer advantages such as light weight, corrosion resistance and ease of processing. Current interest to improve the thermal conductivity of polymers is focused on the selective addition of nanofillers with high thermal conductivity. Unusually high thermal conductivity makes carbon nanotube (CNT) the best promising candidate material for thermally conductive composites. However, the thermal conductivities of polymer/CNT nanocomposites are relatively low compared with expectations from the intrinsic thermal conductivity of CNTs. The challenge primarily comes from the large interfacial thermal resistance between the CNT and the surrounding polymer matrix, which hinders the transfer of phonon dominating heat conduction in polymer and CNT. This article reviews the status of worldwide research in the thermal conductivity of CNTs and their polymer nanocomposites. The dependence of thermal conductivity of nanotubes on the atomic structure, the tube size, the morphology, the defect and the purification is reviewed. The roles of particle/polymer and particle/particle interfaces on the thermal conductivity of polymer/CNT nanocomposites are discussed in detail, as well as the relationship between the thermal conductivity and the micro- and nano-structure of the composite

Influence of nanotube length and density on the plasmonic terahertz response of single-walled carbon nanotubes

We measure the conductivity spectra of thin films comprising bundled single-walled carbon nanotubes (CNTs) of different average lengths in the frequency range 0.3-1000 THz and temperature interval 10-530 K. The observed temperature-induced changes in the terahertz conductivity spectra are shown to depend strongly on the average CNT length, with a conductivity around 1 THz that increases/decreases as the temperature increases for short/long tubes. This behaviour originates from the temperature dependence of the electron scattering rate, which we obtain from Drude fits of the measured conductivity in the range 0.3-2 THz for 10 $\mu$m length CNTs. This increasing scattering rate with temperature results in a subsequent broadening of the observed THz conductivity peak at higher temperatures and a shift to lower frequencies for increasing CNT length. Finally, we show that the change in conductivity with temperature depends not only on tube length, but also varies with tube density. We record the effective conductivities of composite films comprising mixtures of WS$_2$ nanotubes and CNTs vs CNT density for frequencies in the range 0.3-1 THz, finding that the conductivity increases/decreases for low/high density films as the temperature increases. This effect arises due to the density dependence of the effective length of conducting pathways in the composite films, which again leads to a shift and temperature dependent broadening of the THz conductivity peak.Comment: Submitted to Journal of Physics D. Main manuscript: 9 pages, 8 figures. Supplementary material: 5 pages, 6 figure