58 research outputs found

    Elevated-temperature impact toughness of Mg–(Gd, Y)–Zr alloy

    Get PDF
    The Charpy impact results for Mg–10Gd–3Y–0.5Zr and Mg–11Y–5Gd–2Zn–0.5Zr alloys at various temperatures showed that Mg–10Gd–3Y–0.5Zr was more sensitive to temperature. The increase in impact toughness with temperature was related to the blunt crack-tip at high temperatures. The delamination and local melt of matrix were responsible for the brittle-to-ductile transition of GW103 alloy. The branch and bridging of cracks resulting from ordered phases played an import role in the change in fracture mode from cleavage fracture to quasi-cleavage and dimple-fracture for WGZ1152 alloy

    The performance of the jet trigger for the ATLAS detector during 2011 data taking

    Get PDF
    The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

    Measurement of prompt photon production in sNN√=8.16 TeV p+Pb collisions with ATLAS

    Get PDF
    The inclusive production rates of isolated, prompt photons in p+Pb collisions at sNN√=8.16 TeV are studied with the ATLAS detector at the Large Hadron Collider using a dataset with an integrated luminosity of 165 nb−1 recorded in 2016. The cross-section and nuclear modification factor RpPb are measured as a function of photon transverse energy from 20 GeV to 550 GeV and in three nucleon-nucleon centre-of-mass pseudorapidity regions, (-2.83,-2.02), (-1.84,0.91), and (1.09,1.90). The cross-section and RpPb values are compared with the results of a next-to-leading-order perturbative QCD calculation, with and without nuclear parton distribution function modifications, and with expectations based on a model of the energy loss of partons prior to the hard scattering. The data disfavour a large amount of energy loss and provide new constraints on the parton densities in nuclei.We acknowledge the support of ANPCyT, Argentina; YerPhI, Ar-menia; ARC, Australia; BMWFW and FWF, Austria; ANAS, Azer-baijan; SSTC, Belarus; CNPq and FAPESP, Brazil; NSERC, NRC and CFI, Canada; CERN; CONICYT, Chile; CAS, MOST and NSFC, China; COLCIENCIAS, Colombia; MSMT CR, MPO CR and VSC CR, Czech Republic; DNRF and DNSRC, Denmark; IN2P3-CNRS, CEA-DRF/IRFU, France; SRNSFG, Georgia; BMBF, HGF, and MPG, Germany; GSRT, Greece; RGC, Hong Kong SAR, China; ISF and Benoziyo Center, Is-rael; INFN, Italy; MEXT and JSPS, Japan; CNRST, Morocco; NWO, Netherlands; RCN, Norway; MNiSW and NCN, Poland; FCT, Portu-gal; MNE/IFA, Romania; MES of Russia and NRC KI, Russian Fed-eration; JINR; MESTD, Serbia; MSSR, Slovakia; ARRS and MIZƠ, Slovenia; DST/NRF, South Africa; MINECO, Spain; SRC and Wallen-berg Foundation, Sweden; SERI, SNSF and Cantons of Bern and Geneva, Switzerland; MOST, Taiwan; TAEK, Turkey; STFC, United Kingdom; DOE and NSF, United States of America. In addition, in-dividual groups and members have received support from BCKDF, Canarie, CRC and Compute Canada, Canada; COST, ERC, ERDF, Hori-zon 2020, and Marie SkƂodowska-Curie Actions, European Union; Investissements d’ Avenir Labex and Idex, ANR, France; DFG and AvH Foundation, Germany; Herakleitos, Thales and Aristeia pro-grammes co-financed by EU-ESF and the Greek NSRF, Greece; BSF-NSF and GIF, Israel; CERCA Programme Generalitat de Catalunya, Spain; The Royal Society and Leverhulme Trust, United Kingdom

    Search for the Standard Model Higgs boson decaying into bb¯ produced in association with top quarks decaying hadronically in pp collisions at √s = 8 TeV with the ATLAS detector

    Get PDF
    A search for Higgs boson production in association with a pair of top quarks (ttÂŻ H) is performed, where the Higgs boson decays to bbÂŻ, and both top quarks decay hadronically. The data used correspond to an integrated luminosity of 20.3 fb−1 of pp collisions at √s = 8 TeV collected with the ATLAS detector at the Large Hadron Collider. The search selects events with at least six energetic jets and uses a boosted decision tree algorithm to discriminate between signal and Standard Model background. The dominant multijet background is estimated using a dedicated data-driven technique. For a Higgs boson mass of 125 GeV, an upper limit of 6.4 (5.4) times the Standard Model cross section is observed (expected) at 95% confidence level. The best-fit value for the signal strength is ÎŒ = 1.6 ± 2.6 times the Standard Model expectation for mH = 125 GeV. Combining all ttÂŻ H searches carried out by ATLAS at √s = 8 and 7 TeV, an observed (expected) upper limit of 3.1 (1.4) times the Standard Model expectation is obtained at 95% confidence level, with a signal strength ÎŒ = 1.7 ± 0.8

    Helium identification with LHCb

    Get PDF
    The identification of helium nuclei at LHCb is achieved using a method based on measurements of ionisation losses in the silicon sensors and timing measurements in the Outer Tracker drift tubes. The background from photon conversions is reduced using the RICH detectors and an isolation requirement. The method is developed using pp collision data at √(s) = 13 TeV recorded by the LHCb experiment in the years 2016 to 2018, corresponding to an integrated luminosity of 5.5 fb-1. A total of around 105 helium and antihelium candidates are identified with negligible background contamination. The helium identification efficiency is estimated to be approximately 50% with a corresponding background rejection rate of up to O(10^12). These results demonstrate the feasibility of a rich programme of measurements of QCD and astrophysics interest involving light nuclei

    Momentum scale calibration of the LHCb spectrometer

    Get PDF
    For accurate determination of particle masses accurate knowledge of the momentum scale of the detectors is crucial. The procedure used to calibrate the momentum scale of the LHCb spectrometer is described and illustrated using the performance obtained with an integrated luminosity of 1.6 fb-1 collected during 2016 in pp running. The procedure uses large samples of J/ψ → ÎŒ + ÎŒ - and B+ → J/ψ K + decays and leads to a relative accuracy of 3 × 10-4 on the momentum scale

    Curvature-bias corrections using a pseudomass method

    Get PDF
    Momentum measurements for very high momentum charged particles, such as muons from electroweak vector boson decays, are particularly susceptible to charge-dependent curvature biases that arise from misalignments of tracking detectors. Low momentum charged particles used in alignment procedures have limited sensitivity to coherent displacements of such detectors, and therefore are unable to fully constrain these misalignments to the precision necessary for studies of electroweak physics. Additional approaches are therefore required to understand and correct for these effects. In this paper the curvature biases present at the LHCb detector are studied using the pseudomass method in proton-proton collision data recorded at centre of mass energy √(s)=13 TeV during 2016, 2017 and 2018. The biases are determined using Z→Ό + ÎŒ - decays in intervals defined by the data-taking period, magnet polarity and muon direction. Correcting for these biases, which are typically at the 10-4 GeV-1 level, improves the Z→Ό + ÎŒ - mass resolution by roughly 18% and eliminates several pathological trends in the kinematic-dependence of the mean dimuon invariant mass

    Search for the Higgs boson produced in association with a W boson and decaying to four b-quarks via two spin-zero particles in pp collisions at 13 TeV with the ATLAS detector

    Get PDF
    This paper presents a dedicated search for exotic decays of the Higgs boson to a pair of new spin-zero particles, H → aa, where the particle a decays to b-quarks and has a mass in the range of 20–60 GeV. The search is performed in events where the Higgs boson is produced in association with a W boson, giving rise to a signature of a lepton (electron or muon), missing transverse momentum, and multiple jets from b-quark decays. The analysis is based on the full dataset of pp collisions at √s = 13 TeV recorded in 2015 by the ATLAS detector at the CERN Large Hadron Collider, corresponding to an integrated luminosity of 3.2 fb−1. No significant excess of events above the Standard Model prediction is observed, and a 95% confidence-level upper limit is derived for the product of the production cross section for pp → W H times the branching ratio for the decay H → aa → 4b. The upper limit ranges from 6.2 pb for an a-boson mass ma = 20 GeV to 1.5 pb for ma = 60 GeV

    High Tensile Stress with Minimal Dopant Diffusion by Low Temperature Microwave Anneal

    No full text
    In this letter, rapid thermal annealing (RTA) and microwave annealing (MA) are compared to demonstrate the dopant activation. Using microwave annealing, the dopant in the Si was well-activated and showed suppressed dopant diffusion, as compared to traditional high temperature RTA. In addition, SiN(x) films after low temperature MA treatment presented higher tensile stress than the films annealed by RTA. Therefore, this MA approach could potentially be applied to these behaviors of I distribution and higher tensile stress SiNx film may be useful in contact etch-stop layer or stress memorization technique in the fabrication of small pitch nanoscaled n-channel Metal-Oxide-Semiconductor Field Effect Transistors. (C) 2011 The Electrochemical Society. [DOI: 10.1149/1.3536462] All rights reserved
    • 

    corecore