2,449 research outputs found
Efecto del tipo tinta y de las propiedades del papel estucado de alta gama en la calidad de impresión
En los últimos años, el gran desarrollo tecnológico experimentado por el sector de la impresión offset, unido a que cada vez los costes de producción son más ajustados, ha producido un aumento de la exigencia de la calidad del papel. La calidad de impresión de un papel estucado se evalúa mediante la densidad, las coordenadas colorimétricas y el brillo de la impresión. El objetivo del estudio fue determinar la influencia de las propiedades del papel estucado y de la tinta sobre las propiedades que definen la calidad de la impresión. Para ello se seleccionaron ocho papeles estucados (5 brillantes y 3 mates) y se determinaron la rugosidad y la energía libre de superficie de los mismos. Posteriormente se imprimieron con cantidades crecientes de tinta en un IGT, con dos tintas de color negro y dos cian. Por último se determinaron la densidad, el brillo y las coordenadas CIELAB de la impresión. La variación de densidad, brillo, L* a* y b* de la impresión con la tinta transferida presenta tendencias similares en todos los papeles, existiendo diferencias en la impresión en función del tipo de tinta. Las propiedades de impresión dependen principalmente de la lisura Bekk y de la componente polar de la energía de superficie
Obstructive Sleep Apnoea Syndrome, Endothelial Function and Markers of Endothelialization. Changes after CPAP
STUDY OBJECTIVES: This study tries to assess the endothelial function in vivo using flow-mediated dilatation (FMD) and several biomarkers of endothelium formation/restoration and damage in patients with obstructive sleep apnoea (OSA) syndrome at baseline and after three months with CPAP therapy. DESIGN: Observational study, before and after CPAP therapy. SETTING AND PATIENTS: We studied 30 patients with apnoea/hypopnoea index (AHI) >15/h that were compared with themselves after three months of CPAP therapy. FMD was assessed non-invasively in vivo using the Laser-Doppler flowmetry. Circulating cell-free DNA (cf-DNA) and microparticles (MPs) were measured as markers of endothelial damage and the vascular endothelial growth factor (VEGF) was determined as a marker of endothelial restoration process. MEASUREMENTS AND RESULTS: After three month with CPAP, FMD significantly increased (1072.26 ± 483.21 vs. 1604.38 ± 915.69 PU, p< 0.005) cf-DNA and MPs significantly decreased (187.93 ± 115.81 vs. 121.28 ± 78.98 pg/ml, p<0.01, and 69.60 ± 62.60 vs. 39.82 ± 22.14 U/μL, p<0.05, respectively) and VEGF levels increased (585.02 ± 246.06 vs. 641.11 ± 212.69 pg/ml, p<0.05). These changes were higher in patients with more severe disease. There was a relationship between markers of damage (r = -0.53, p<0.005) but not between markers of damage and restoration, thus suggesting that both types of markers should be measured together. CONCLUSIONS: CPAP therapy improves FMD. This improvement may be related to an increase of endothelial restoration process and a decrease of endothelial damage
Influencia de la composición fibrosa y las propiedades estructurales del papel prensa en la densidad de la de impresión y la capacidad de secado.
En los últimos años, el papel prensa se fabrica mayoritariamente con fibra reciclada y las rotativas coldset se han convertido en unas instalaciones altamente tecnológicas. En esta nueva situación, los impresores son cada vez más exigentes con el papel que emplean. La calidad de impresión en el papel prensa se evalúa mediante la densidad y la capacidad de secado. El objetivo de este trabajo es establecer cómo influyen la composición fibrosa y las características estructurales del papel en la calidad de impresión. Se seleccionaron diversos papeles prensa, fabricados con fibra virgen y reciclada. Se determinaron las propiedades físicas del papel por métodos clásicos de laboratorio, la absorción de aceite mediante la medición de ángulos de contacto dinámicos y la estructura porosa empleando la porosimetría de intrusión de mercurio. Posteriormente los papeles se imprimieron en el equipo de laboratorio IGT con tinta negra y se evaluó la densidad óptica de la impresión y el repintado. Los resultados de los ensayos clásicos de laboratorio no aportan información sobre el comportamiento del papel durante la impresión. Sin embargo, el tamaño de los poros superficiales y la absorción de aceite explican la densidad de la impresión y la capacidad de secado
Dashboard for the VISIR remote lab
The VISIR dashboard (VISIR-DB) is a learning analytics tool connected with the VISIR remote lab. In VISIR, every action performed by a student from the interface over the remote laboratory and back is logged and recorded. VISIR-DB helps visualizing, in a fast and deep way, the recorded logs from this communication. Using this tool, a teacher can analyze and understand better how the students are using the remote lab during their learning process on analog electronics. With this information, the VISIR platform can be improved and the use of remote labs can be better understood.The authors acknowledge the support provided by the European Project PILAR. Platform Integration of Laboratories based on the Architecture of visiR - Erasmus+ Strategic Partnership nº 2016-1-ES01-KA203-025327info:eu-repo/semantics/publishedVersio
Use of IP-10 detection in dried plasma spots for latent tuberculosis infection diagnosis in contacts via mail
IP-10; Tuberculosis; MailIP-10; Tuberculosi; CorreuIP-10; Tuberculosis; CorreoThe aim of this study was to test the use of IP-10 detection in dried plasma from contact studies individuals (contacts of smear positive patients), by comparing it with IP-10 and IFN-γ detection in direct plasma, to establish IP-10 detection in DPS as a useful assay for LTBI diagnosis. Whole blood samples were collected from 80 subjects: 12 with active tuberculosis (TB), and 68 from contact studies. The amount of IFN-γ produced by sensitized T cells was determined in direct plasma by QuantiFERON Gold In-Tube test. IP-10 levels were determined in direct and dried plasma by an in-house ELISA. For dried plasma IP-10 determination, two 25 µl plasma drops were dried in Whatman903 filter paper and sent by mail to the laboratory. Regarding TB patients, 100.0%, 91.7% and 75.0% were positive for IFN-γ detection and IP-10 detection in direct and dried plasma, respectively. In contacts, 69.1%, 60.3% and 48.5% had positive results after IFN-γ and IP-10 in direct and dried plasma, respectively. The agreement among in vitro tests was substantial and IP-10 levels in direct and dried plasma were strongly correlated (r = 0.897). In conclusion, IP-10 detection in dried plasma is a simple and safe method that would help improve LTBI management
Charge separation relative to the reaction plane in Pb-Pb collisions at TeV
Measurements of charge dependent azimuthal correlations with the ALICE
detector at the LHC are reported for Pb-Pb collisions at TeV. Two- and three-particle charge-dependent azimuthal correlations in
the pseudo-rapidity range are presented as a function of the
collision centrality, particle separation in pseudo-rapidity, and transverse
momentum. A clear signal compatible with a charge-dependent separation relative
to the reaction plane is observed, which shows little or no collision energy
dependence when compared to measurements at RHIC energies. This provides a new
insight for understanding the nature of the charge dependent azimuthal
correlations observed at RHIC and LHC energies.Comment: 12 pages, 3 captioned figures, authors from page 2 to 6, published
version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/286
Transverse sphericity of primary charged particles in minimum bias proton-proton collisions at , 2.76 and 7 TeV
Measurements of the sphericity of primary charged particles in minimum bias
proton--proton collisions at , 2.76 and 7 TeV with the ALICE
detector at the LHC are presented. The observable is linearized to be collinear
safe and is measured in the plane perpendicular to the beam direction using
primary charged tracks with GeV/c in . The
mean sphericity as a function of the charged particle multiplicity at
mid-rapidity () is reported for events with different
scales ("soft" and "hard") defined by the transverse momentum of the leading
particle. In addition, the mean charged particle transverse momentum versus
multiplicity is presented for the different event classes, and the sphericity
distributions in bins of multiplicity are presented. The data are compared with
calculations of standard Monte Carlo event generators. The transverse
sphericity is found to grow with multiplicity at all collision energies, with a
steeper rise at low , whereas the event generators show the
opposite tendency. The combined study of the sphericity and the mean with multiplicity indicates that most of the tested event generators
produce events with higher multiplicity by generating more back-to-back jets
resulting in decreased sphericity (and isotropy). The PYTHIA6 generator with
tune PERUGIA-2011 exhibits a noticeable improvement in describing the data,
compared to the other tested generators.Comment: 21 pages, 9 captioned figures, 3 tables, authors from page 16,
published version, figures from
http://aliceinfo.cern.ch/ArtSubmission/node/308
Centrality dependence of charged particle production at large transverse momentum in Pb-Pb collisions at TeV
The inclusive transverse momentum () distributions of primary
charged particles are measured in the pseudo-rapidity range as a
function of event centrality in Pb-Pb collisions at
TeV with ALICE at the LHC. The data are presented in the range
GeV/ for nine centrality intervals from 70-80% to 0-5%.
The Pb-Pb spectra are presented in terms of the nuclear modification factor
using a pp reference spectrum measured at the same collision
energy. We observe that the suppression of high- particles strongly
depends on event centrality. In central collisions (0-5%) the yield is most
suppressed with at -7 GeV/. Above
GeV/, there is a significant rise in the nuclear modification
factor, which reaches for GeV/. In
peripheral collisions (70-80%), the suppression is weaker with almost independently of . The measured nuclear
modification factors are compared to other measurements and model calculations.Comment: 17 pages, 4 captioned figures, 2 tables, authors from page 12,
published version, figures at
http://aliceinfo.cern.ch/ArtSubmission/node/284
Measurement of the cross-section and charge asymmetry of bosons produced in proton-proton collisions at TeV with the ATLAS detector
This paper presents measurements of the and cross-sections and the associated charge asymmetry as a
function of the absolute pseudorapidity of the decay muon. The data were
collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with
the ATLAS experiment at the LHC and correspond to a total integrated luminosity
of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements
varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the
1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured
with an uncertainty between 0.002 and 0.003. The results are compared with
predictions based on next-to-next-to-leading-order calculations with various
parton distribution functions and have the sensitivity to discriminate between
them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables,
submitted to EPJC. All figures including auxiliary figures are available at
https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13
- …