Phenomenology of a light scalar: the dilaton

We make use of the language of non-linear realizations to analyze electro-weak symmetry breaking scenarios in which a light dilaton emerges from the breaking of a nearly conformal strong dynamics, and compare the phenomenology of the dilaton to that of the well motivated light composite Higgs scenario. We argue that -- in addition to departures in the decay/production rates into massless gauge bosons mediated by the conformal anomaly -- characterizing features of the light dilaton scenario (as well as other scenarios admitting a light CP-even scalar not directly related to the breaking of the electro-weak symmetry) are off-shell events at high invariant mass involving two longitudinally polarized vector bosons and a dilaton, and tree-level flavor violating processes. Accommodating both electro-weak precision measurements and flavor constraints appears especially challenging in the ambiguous scenario in which the Higgs and the dilaton fields strongly mix. We show that warped higgsless models of electro-weak symmetry breaking are explicit and tractable realizations of this limiting case. The relation between the naive radion profile often adopted in the study of holographic realizations of the light dilaton scenario and the actual dynamical dilaton field is clarified in the Appendix.Comment: 21 page

Terrestrial impact structures as geoheritage: an assessment method of their scientific value and its application to Brazil

Terrestrial impact structures are geological and geomorphological features with particular importance to understand the history and evolution of the planet. Impact structures are scattered around the world but in many countries these features are under threat, essentially due to anthropic factors. Impact structures with higher scienti c value should be considered as geological heritage and, consequently, be subjected to geoconservation strategies. In order to select the most important impact structures to be properly conserved and managed, this paper proposes a quantitative assessment method of the scienti c value of these structures. The eight Brazilian impact structures were used to test this method that has the potential to be applied to any geological context in any country. The structures known as Araguainha Dome-MT and Serra da Cangalha-TO reached a higher scienti c value, which justi es the need to develop geoconservation strategies and a proper management.The Conselho Nacional de Pesquisa e Desenvolvimento (CNPq / National Council for Research and Development) and the Programa Ciências sem Fronteiras / Science Without Borders Programme are acknowledged for the support of the postdoctoral grant No 233209/2013-1 of the 1st author. The work was co-funded by the European Union through the European Regional Development Fund, based on COMPETE 2020 (Programa Operacional da Competitividade e Internacionalização), project ICT (UID/ GEO/04683/2013) with reference POCI-01-0145- FEDER-007690 and Portuguese funds provided by Fundação para a Ciência e Tecnologia.info:eu-repo/semantics/publishedVersio

Inventory and quantitative assessment of geosites and geodiversity sites: a review

"Published online: 15 January 2015"The inventory and quantitative assessment of the most valuable occurrences of geodiversity are essential steps in any geoconservation strategy and in the establishment of priorities in site management. Despite the existence of many site inventories applied to different scales (countries, municipalities, parks, etc.), the criteria used for their selection are often unclear and poorly defined. This paper proposes a new approach to the concepts of geosite and geodiversity site and reviews the procedures used in the development of a systematic site inventory applied to different scales and values. Procedures to achieve a numerical evaluation of the value and degradation risk of sites are reviewed and new criteria are proposed. Finally, guidelines are presented, bearing in mind the preparation of effective geodiversity inventories, to support geoparks’ strategies. This paper aims to contribute to a better understanding and use of the above-mentioned concepts, which are essential for the implementation of geoconservation actions worldwide.The author thanks Diamantino Pereira, Flavia Lima, and Paulo Pereira for fruitful discussions and insights; Teresa Mota for the English revision; and the reviewers for significant improvements of the first submitted version. This paper results of the research done at the University of Minho and at the Geology Centre of the University of Porto, partially founded by the Foundation for Science and Technology (Portugal), strategic project with reference PEst-OE/CTE/UI0039/2014

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Search for the neutral Higgs bosons of the minimal supersymmetric standard model in pp collisions at root s=7 TeV with the ATLAS detector

A search for neutral Higgs bosons of the Minimal Supersymmetric Standard Model (MSSM) is reported. The analysis is based on a sample of proton-proton collisions at a centre-of-mass energy of 7TeV recorded with the ATLAS detector at the Large Hadron Collider. The data were recorded in 2011 and correspond to an integrated luminosity of 4.7 fb-1 to 4.8 fb-1. Higgs boson decays into oppositely-charged muon or τ lepton pairs are considered for final states requiring either the presence or absence of b-jets. No statistically significant excess over the expected background is observed and exclusion limits at the 95% confidence level are derived. The exclusion limits are for the production cross-section of a generic neutral Higgs boson, φ, as a function of the Higgs boson mass and for h/A/H production in the MSSM as a function of the parameters mA and tan β in the mhmax scenario for mA in the range of 90GeV to 500 GeV. Copyright CERN

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV