526 research outputs found

    Reference Ranges for Bone Mineral Density and Prevalence of Osteoporosis in Vietnamese Men and Women

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The aim of this study was to examine the effect of different reference ranges in bone mineral density on the diagnosis of osteoporosis.</p> <p>Methods</p> <p>This cross-sectional study involved 357 men and 870 women aged between 18 and 89 years, who were randomly sampled from various districts within Ho Chi Minh City, Vietnam. BMD at the femoral neck, lumbar spine and whole body was measured by DXA (Hologic QDR4500). Polynomial regression models and bootstraps method were used to determine peak BMD and standard deviation (<it>SD</it>). Based on the two parameters, we computed T-scores (denoted by <it>T</it><sub>VN</sub>) for each individual in the study. A similar diagnosis was also done based on T-scores provided by the densitometer (<it>T</it><sub>DXA</sub>), which is based on the US White population (NHANES III). We then compared the concordance between <it>T</it><sub>VN </sub>and <it>T</it><sub>DXA </sub>in the classification of osteoporosis. Osteoporosis was defined according to the World Health Organization criteria.</p> <p>Results</p> <p>In post-menopausal women, the prevalence of osteoporosis based on femoral neck <it>T</it><sub>VN </sub>was 29%, but when the diagnosis was based on <it>T</it><sub>DXA</sub>, the prevalence was 44%. In men aged 50+ years, the <it>T</it><sub>VN</sub>-based prevalence of osteoporosis was 10%, which was lower than <it>T</it><sub>DXA</sub>-based prevalence (30%). Among 177 women who were diagnosed with osteoporosis by <it>T</it><sub>DXA</sub>, 35% were actually osteopenia by <it>T</it><sub>VN</sub>. The kappa-statistic was 0.54 for women and 0.41 for men.</p> <p>Conclusion</p> <p>These data suggest that the <it>T-</it>scores provided by the Hologic QDR4500 over-diagnosed osteoporosis in Vietnamese men and women. This over-diagnosis could lead to over-treatment and influence the decision of recruitment of participants in clinical trials.</p

    Development of the interRAI Pressure Ulcer Risk Scale (PURS) for use in long-term care and home care settings

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>In long-term care (LTC) homes in the province of Ontario, implementation of the Minimum Data Set (MDS) assessment and The Braden Scale for predicting pressure ulcer risk were occurring simultaneously. The purpose of this study was, using available data sources, to develop a bedside MDS-based scale to identify individuals under care at various levels of risk for developing pressure ulcers in order to facilitate targeting risk factors for prevention.</p> <p>Methods</p> <p>Data for developing the interRAI Pressure Ulcer Risk Scale (interRAI PURS) were available from 2 Ontario sources: three LTC homes with 257 residents assessed during the same time frame with the MDS and Braden Scale for Predicting Pressure Sore Risk, and eighty-nine Ontario LTC homes with 12,896 residents with baseline/reassessment MDS data (median time 91 days), between 2005-2007. All assessments were done by trained clinical staff, and baseline assessments were restricted to those with no recorded pressure ulcer. MDS baseline/reassessment samples used in further testing included 13,062 patients of Ontario Complex Continuing Care Hospitals (CCC) and 73,183 Ontario long-stay home care (HC) clients.</p> <p>Results</p> <p>A data-informed Braden Scale cross-walk scale using MDS items was devised from the 3-facility dataset, and tested in the larger longitudinal LTC homes data for its association with a future new pressure ulcer, giving a c-statistic of 0.676. Informed by this, LTC homes data along with evidence from the clinical literature was used to create an alternate-form 7-item additive scale, the interRAI PURS, with good distributional characteristics and c-statistic of 0.708. Testing of the scale in CCC and HC longitudinal data showed strong association with development of a new pressure ulcer.</p> <p>Conclusions</p> <p>interRAI PURS differentiates risk of developing pressure ulcers among facility-based residents and home care recipients. As an output from an MDS assessment, it eliminates duplicated effort required for separate pressure ulcer risk scoring. Moreover, it can be done manually at the bedside during critical early days in an admission when the full MDS has yet to be completed. It can be calculated with established MDS instruments as well as with the newer interRAI suite instruments designed to follow persons across various care settings (interRAI Long-Term Care Facilities, interRAI Home Care, interRAI Palliative Care).</p

    Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

    Get PDF
    The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

    Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

    Get PDF
    The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

    Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

    Get PDF
    This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}andcorrespondtoanintegratedluminosityof and correspond to an integrated luminosity of 4.6\;{\rm f}{{{\rm b}}^{-1}}.ThemeasurementisperformedbyreconstructingtheboostedWorZbosonsinsinglejets.ThereconstructedjetmassisusedtoidentifytheWandZbosons,andajetsubstructuremethodbasedonenergyclusterinformationinthejetcentreofmassframeisusedtosuppressthelargemultijetbackground.ThecrosssectionforeventswithahadronicallydecayingWorZboson,withtransversemomentum. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum {{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}andpseudorapidity and pseudorapidity |\eta |\lt 1.9,ismeasuredtobe, is measured to be {{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

    Search for the neutral Higgs bosons of the minimal supersymmetric standard model in pp collisions at root s=7 TeV with the ATLAS detector

    Get PDF
    A search for neutral Higgs bosons of the Minimal Supersymmetric Standard Model (MSSM) is reported. The analysis is based on a sample of proton-proton collisions at a centre-of-mass energy of 7TeV recorded with the ATLAS detector at the Large Hadron Collider. The data were recorded in 2011 and correspond to an integrated luminosity of 4.7 fb-1 to 4.8 fb-1. Higgs boson decays into oppositely-charged muon or τ lepton pairs are considered for final states requiring either the presence or absence of b-jets. No statistically significant excess over the expected background is observed and exclusion limits at the 95% confidence level are derived. The exclusion limits are for the production cross-section of a generic neutral Higgs boson, φ, as a function of the Higgs boson mass and for h/A/H production in the MSSM as a function of the parameters mA and tan β in the mhmax scenario for mA in the range of 90GeV to 500 GeV. Copyright CERN

    Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

    Get PDF
    The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

    Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

    Get PDF
    Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

    Search for R-parity-violating supersymmetry in events with four or more leptons in sqrt(s) =7 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for new phenomena in final states with four or more leptons (electrons or muons) is presented. The analysis is based on 4.7 fb−1 of s=7  TeV \sqrt{s}=7\;\mathrm{TeV} proton-proton collisions delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in two signal regions: one that requires moderate values of missing transverse momentum and another that requires large effective mass. The results are interpreted in a simplified model of R-parity-violating supersymmetry in which a 95% CL exclusion region is set for charged wino masses up to 540 GeV. In an R-parity-violating MSUGRA/CMSSM model, values of m 1/2 up to 820 GeV are excluded for 10 < tan β < 40

    Search for high-mass resonances decaying to dilepton final states in pp collisions at s√=7 TeV with the ATLAS detector

    Get PDF
    The ATLAS detector at the Large Hadron Collider is used to search for high-mass resonances decaying to an electron-positron pair or a muon-antimuon pair. The search is sensitive to heavy neutral Z′ gauge bosons, Randall-Sundrum gravitons, Z * bosons, techni-mesons, Kaluza-Klein Z/γ bosons, and bosons predicted by Torsion models. Results are presented based on an analysis of pp collisions at a center-of-mass energy of 7 TeV corresponding to an integrated luminosity of 4.9 fb−1 in the e + e − channel and 5.0 fb−1 in the μ + μ −channel. A Z ′ boson with Standard Model-like couplings is excluded at 95 % confidence level for masses below 2.22 TeV. A Randall-Sundrum graviton with coupling k/MPl=0.1 is excluded at 95 % confidence level for masses below 2.16 TeV. Limits on the other models are also presented, including Technicolor and Minimal Z′ Models
    corecore