Thermal fluctuations in capillary thinning of thin liquid films

Thermal fluctuations have been shown to influence the thinning dynamics of planar thin liquid films, bringing predicted rupture times closer to experiments. Most liquid films in nature and industry are, however, non-planar. Thinning of such films not just results from the interplay between stabilizing surface tension forces and destabilizing van der Waals forces, but also from drainage due to curvature differences. This work explores the influence of thermal fluctuations on the dynamics of thin non-planar films subjected to drainage, with their dynamics governed by two parameters: the strength of thermal fluctuations,  , and the strength of drainage,  . For strong drainage ( ≫tr ), we find that the film ruptures due to the formation of a local depression called a dimple that appears at the connection between the curved and flat parts of the film. For this dimple-dominated regime, the rupture time, tr , solely depends on  , according to the earlier reported scaling, tr∼−10/7 . By contrast, for weak drainage ( ≪tr ), the film ruptures at a random location due to the spontaneous growth of fluctuations originating from thermal fluctuations. In this fluctuations-dominated regime, the rupture time solely depends on  as tr∼−(1/max)ln⁡(2) , with =1.15 . This scaling is rationalized using linear stability theory, which yields max as the growth rate of the fastest-growing wave and =1 . These insights on if, when and how thermal fluctuations play a role are instrumental in predicting the dynamics and rupture time of non-flat draining thin films

Two-band fast Hartley transform

This article has been made available through the Brunel Open Access Publishing Fund.Efficient algorithms have been developed over the past 30 years for computing the forward and inverse discrete Hartley transforms (DHTs). These are similar to the fast Fourier transform (FFT) algorithms for computing the discrete Fourier transform (DFT). Most of these methods seek to minimise the complexity of computations and or the number of operations. A new approach for the computation of the radix-2 fast Hartley transform (FHT) is presented. The proposed algorithm, based on a two-band decomposition of the input data, possesses a very regular structure, avoids the input or out data shuffling, requires slightly less multiplications than the existing approaches, but increases the number of additions

Performance Comparison of Various Textile Composition and Structure Through Full-Wave Electromagnetic Simulation and Measurement

This paper presents the performance of microstrip patch antenna integrated with textile as a substrate, designed for wearable application. Comparative study between cotton fabric as a substrate with copper tape as radiating element and FR-4 as a substrate with E-textile as a radiating element is performed to evaluate the performance of antennas. The antennas integrated in the proposed structures operate at resonant frequency of 5 GHz. Parameters such as fabric thickness and dielectric permittivity are determined through laboratory measurement prior to simulation to ensure accurate analysis and to take into account non-ideal conditions. Preliminary analysis is performed to observe and investigate the characteristics and electromagnetic performance of the antennas when different types of textile are used as the substrate. Antenna prototypes with two different compositions has been fabricated and tested for validation. The fabricated prototypes give good return loss performance which is -27dB at 4.3 GHz resonant frequency for prototype 1 and -22 dB at 4.7 GHz for prototype 2 (e-textile). However, the frequency for Prototype 2 (E-textile) is slightly shifted about 30% to the left due to non-ideal conditions of the textile materials. The ability of both antennas to radiate good signal is also measured. Based on the measurement data, Prototype 2 (E-textile) shows better performance with higher received power compare to Prototype 1 (copper tape) which is -43 dBm within 1 meter range, while - 58 dBm for Prototype 1

BIOCHEMICAL STUDY TO ANALYSE SALIVARY COPPER IN ORAL SUB-MUCOUS FIBROSIS PATIENTS WITH ARECANUT CHEWING HABIT

Oral Sub-Mucous Fibrosis (OSMF); a collagen disorder is the most prevalent precancerous condition with high malignant transformation rate. This disease is caused by number of factors, however a complete etiopathogenesis of the disease is not known. Copper a trace element present in arecanut has shown its impact in collagen production through its role as coenzyme in a biochemical processes. Therefore, we have undertaken this study to establish relation of copper in etiopathogenesis of OSMF

Integrated computer-aided working-fluid design and thermoeconomic ORC system optimisation

The successful commercialisation of organic Rankine cycle (ORC) systems across a range of power outputs and heat-source temperatures demands step-changes in both improved thermodynamic performance and reduced investment costs. The former can be achieved through high-performance components and optimised system architectures operating with novel working-fluids, whilst the latter requires careful component-technology selection, economies of scale, learning curves and a proper selection of materials and cycle configurations. In this context, thermoeconomic optimisation of the whole power-system should be completed aimed at maximising profitability. This paper couples the computer-aided molecular design (CAMD) of the working-fluid with ORC thermodynamic models, including recuperated and other alternative (e.g., partial evaporation or trilateral) cycles, and a thermoeconomic system assessment. The developed CAMD-ORC framework integrates an advanced molecular-based group-contribution equation of state, SAFT-γ Mie, with a thermodynamic description of the system, and is capable of simultaneously optimising the working-fluid structure, and the thermodynamic system. The advantage of the proposed CAMD-ORC methodology is that it removes subjective and pre-emptive screening criteria that would otherwise exist in conventional working-fluid selection studies. The framework is used to optimise hydrocarbon working-fluids for three different heat sources (150, 250 and 350 °C, each with mcp = 4.2 kW/K). In each case, the optimal combination of working-fluid and ORC system architecture is identified, and system investment costs are evaluated through component sizing models. It is observed that optimal working fluids that minimise the specific investment cost (SIC) are not the same as those that maximise power output. For the three heat sources the optimal working-fluids that minimise the SIC are isobutane, 2-pentene and 2-heptene, with SICs of 4.03, 2.22 and 1.84 £/W respectively

Wettability and corrosion of [NTf2] anion-based ionic liquids on steel and PVD (TiN, CrN, ZrN) coatings

Thewetting and corrosion behavior of three bis(trifluoromethylsulfonyl)imide-based ionic liquids: 1-Dodecyl-3- methylimidazolium bis(trifluoromethylsulfonyl)imide [C12MIM][NTf2], tributylmethylammonium bis(trifluoromethylsulfonyl)imide [N4441][NTf2] and methyltrioctylammonium bis(trifluoromethylsulfonyl)imide [N1888][NTf2] are tested in this research. The surface tension was measured for temperatures of 293–353 K resulting in the expected linearly decreasing behavior with temperature increase. In addition, contact angle measurements were made on AISI 52100 steel and three coatings (TiN, CrN and ZrN) obtained by PVD technique, finding the regular behavior in hydrophobic (non-polar) systems: high contact angles led to high surface tensions. Complementary parameters like spreading parameter and polarity fraction were calculated to enhance the wetting evaluation of these ionic liquids. [N1888][NTf2]/TiN resulted as the best IL-surface combination for a good wettability, due to the higher dispersion of the charge on the large size cation in this IL and the higher values of total and polar component of the surface free energy for this coating. Finally, SEM-EDS analysis determined that [N1888][NTf2]/ZrN was the best option in order to avoid corrosion problems. The evaporation of water, present as impurity in the ionic liquids, was found the main reason because of corrosion did not occur in the tests carried out at 100 °C

Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio

Observation of a new chi_b state in radiative transitions to Upsilon(1S) and Upsilon(2S) at ATLAS

The chi_b(nP) quarkonium states are produced in proton-proton collisions at the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV and recorded by the ATLAS detector. Using a data sample corresponding to an integrated luminosity of 4.4 fb^-1, these states are reconstructed through their radiative decays to Upsilon(1S,2S) with Upsilon->mu+mu-. In addition to the mass peaks corresponding to the decay modes chi_b(1P,2P)->Upsilon(1S)gamma, a new structure centered at a mass of 10.530+/-0.005 (stat.)+/-0.009 (syst.) GeV is also observed, in both the Upsilon(1S)gamma and Upsilon(2S)gamma decay modes. This is interpreted as the chi_b(3P) system.Comment: 5 pages plus author list (18 pages total), 2 figures, 1 table, corrected author list, matches final version in Physical Review Letter

Measurement of the inclusive isolated prompt photon cross-section in pp collisions at sqrt(s)= 7 TeV using 35 pb-1 of ATLAS data

A measurement of the differential cross-section for the inclusive production of isolated prompt photons in pp collisions at a center-of-mass energy sqrt(s) = 7 TeV is presented. The measurement covers the pseudorapidity ranges |eta|<1.37 and 1.52<=|eta|<2.37 in the transverse energy range 45<=E_T<400GeV. The results are based on an integrated luminosity of 35 pb-1, collected with the ATLAS detector at the LHC. The yields of the signal photons are measured using a data-driven technique, based on the observed distribution of the hadronic energy in a narrow cone around the photon candidate and the photon selection criteria. The results are compared with next-to-leading order perturbative QCD calculations and found to be in good agreement over four orders of magnitude in cross-section.Comment: 7 pages plus author list (18 pages total), 2 figures, 4 tables, final version published in Physics Letters