Deconstruction waste management through 3d reconstruction and bim: a case study

The construction industry is responsible for 50% of the solid waste generated worldwide. Governments around the world formulate legislation and regulations concerning recycling and re-using building materials, aiming to reduce waste and environmental impact. Researchers have also been developing strategies and models of waste management for construction and demolition of buildings. The application of Building Information Modeling (BIM) is an example of this. BIM is emergent technology commonly used to maximize the efficiency of design, construction and maintenance throughout the entire lifecycle. The uses of BIM on deconstruction or demolition are not common; especially the fixtures and fittings of buildings are not considered in BIM models. The development of BIM is based on two-dimensional drawings or sketches, which may not be accurately converted to 3D BIM models. In addition, previous researches mainly focused on construction waste management. There are few studies about the deconstruction waste management focusing on demolition. To fill this gap, this paper aims to develop a framework using a reconstructed 3D model with BIM, for the purpose of improving BIM accuracy and thus developing a deconstruction waste management system to improve demolition efficiency, effective recycling and cost savings. In particular, the developed as-built BIM will be used to identify and measure recyclable materials, as well as to develop a plan for the recycling process

Perception of the risk of adverse reactions to analgesics: Differences between medical students and residents

Low permeability of many wood species due to their anatomical properties causes problems during timber drying as well as impregnating with preservatives and resins. Microwave (MW) treatment influences heartwood permeability and improves preservative uptake and distribution. In the present study, microwave treatment of chir pine (Pinus roxburghii) wood was done at 2,45 GHz frequency at different level of intensity and radiation time. The gas permeability of chir pine wood was measured in an in-house built apparatus. Preservative uptake was tested using acid copper chromate (ACC) preservative by a dipping process. The effect of radiation intensity and time on preservative uptake and air permeability were studied. The results revealed remarkable increase in longitudinal woodair permeability and preservative uptake with the increase of intensity and time of treatment. The results indicate that this technology can be tested and applied on pilot scale for application in wood preservation industry

Measurement of the Forward-Backward Asymmetry in the B -> K(*) mu+ mu- Decay and First Observation of the Bs -> phi mu+ mu- Decay

We reconstruct the rare decays $B^+ \to K^+\mu^+\mu^-$, $B^0 \to K^{*}(892)^0\mu^+\mu^-$, and $B^0_s \to \phi(1020)\mu^+\mu^-$ in a data sample corresponding to $4.4 {\rm fb^{-1}}$ collected in $p\bar{p}$ collisions at $\sqrt{s}=1.96 {\rm TeV}$ by the CDF II detector at the Fermilab Tevatron Collider. Using $121 \pm 16$ $B^+ \to K^+\mu^+\mu^-$ and $101 \pm 12$ $B^0 \to K^{*0}\mu^+\mu^-$ decays we report the branching ratios. In addition, we report the measurement of the differential branching ratio and the muon forward-backward asymmetry in the $B^+$ and $B^0$ decay modes, and the $K^{*0}$ longitudinal polarization in the $B^0$ decay mode with respect to the squared dimuon mass. These are consistent with the theoretical prediction from the standard model, and most recent determinations from other experiments and of comparable accuracy. We also report the first observation of the $B^0_s \to \phi\mu^+\mu^- decay and measure its branching ratio${\mathcal{B}}(B^0_s \to \phi\mu^+\mu^-) = [1.44 \pm 0.33 \pm 0.46] \times 10^{-6}$using$27 \pm 6$signal events. This is currently the most rare$B^0_s$ decay observed.Comment: 7 pages, 2 figures, 3 tables. Submitted to Phys. Rev. Let

Measurements of the properties of Lambda_c(2595), Lambda_c(2625), Sigma_c(2455), and Sigma_c(2520) baryons

We report measurements of the resonance properties of Lambda_c(2595)+ and Lambda_c(2625)+ baryons in their decays to Lambda_c+ pi+ pi- as well as Sigma_c(2455)++,0 and Sigma_c(2520)++,0 baryons in their decays to Lambda_c+ pi+/- final states. These measurements are performed using data corresponding to 5.2/fb of integrated luminosity from ppbar collisions at sqrt(s) = 1.96 TeV, collected with the CDF II detector at the Fermilab Tevatron. Exploiting the largest available charmed baryon sample, we measure masses and decay widths with uncertainties comparable to the world averages for Sigma_c states, and significantly smaller uncertainties than the world averages for excited Lambda_c+ states.Comment: added one reference and one table, changed order of figures, 17 pages, 15 figure

Search for a New Heavy Gauge Boson Wprime with Electron + missing ET Event Signature in ppbar collisions at sqrt(s)=1.96 TeV

We present a search for a new heavy charged vector boson $W^\prime$ decaying to an electron-neutrino pair in $p\bar{p}$ collisions at a center-of-mass energy of 1.96\unit{TeV}. The data were collected with the CDF II detector and correspond to an integrated luminosity of 5.3\unit{fb}^{-1}. No significant excess above the standard model expectation is observed and we set upper limits on $\sigma\cdot{\cal B}(W^\prime\to e\nu)$. Assuming standard model couplings to fermions and the neutrino from the $W^\prime$ boson decay to be light, we exclude a $W^\prime$ boson with mass less than 1.12\unit{TeV/}c^2 at the 95\unit{%} confidence level.Comment: 7 pages, 2 figures Submitted to PR

SARS-CoV-2 neutralizing antibody responses are more robust in patients with severe disease.

We studied plasma antibody responses of 35 patients about 1 month after SARS-CoV-2 infection. Titers of antibodies binding to the viral nucleocapsid and spike proteins were significantly higher in patients with severe disease. Likewise, mean antibody neutralization titers against SARS-CoV-2 pseudovirus and live virus were higher in the sicker patients, by ∼5-fold and ∼7-fold, respectively. These findings have important implications for those pursuing plasma therapy, isolation of neutralizing monoclonal antibodies, and determinants of immunity

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

Micromechanical Properties of Injection-Molded Starch–Wood Particle Composites

The micromechanical properties of injection molded starch–wood particle composites were investigated as a function of particle content and humidity conditions. The composite materials were characterized by scanning electron microscopy and X-ray diffraction methods. The microhardness of the composites was shown to increase notably with the concentration of the wood particles. In addition,creep behavior under the indenter and temperature dependence were evaluated in terms of the independent contribution of the starch matrix and the wood microparticles to the hardness value. The influence of drying time on the density and weight uptake of the injection-molded composites was highlighted. The results revealed the role of the mechanism of water evaporation, showing that the dependence of water uptake and temperature was greater for the starch–wood composites than for the pure starch sample. Experiments performed during the drying process at 70°C indicated that the wood in the starch composites did not prevent water loss from the samples.Peer reviewe