377 research outputs found

    Search for Solar Axions Produced in the p+d3He+Ap + d \rightarrow\rm{^3He}+ A Reaction

    Full text link
    A search for the axioelectric absorption of 5.5-MeV solar axions produced in the p+d3He+γ(5.5MeV)p+d\rightarrow \rm{^3He}+\gamma(5.5 \rm{MeV}) reaction was performed with two BGO detectors placed inside a low-background setup. A model independent limit on axion-photon and axion-nucleon couplings was obtained: gAe×gAN3.2×109(mA=0)|g_{Ae}\times g_{AN}| \leq 3.2\times 10^{-9} (m_A=0). Constraints on the axion-electron coupling constant were obtained for axions with masses in the (0.11.0)(0.1-1.0) MeV range: gAe(1.89.0)×107g_{Ae}\leq (1.8-9.0)\times 10^{-7}. The solar positron flux from Ae+e+A\rightarrow e^-+e^+ decay was determined for axions with masses mA>2mem_A > 2m_e. Using the existing experimental data on the interplanetary positron flux, a new constraint on the axion-electron coupling constant for axions with masses in the (1.25.4)(1.2-5.4) MeV range was obtained: gAe(15)×1017g_{Ae} \leq (1-5)\times 10^{-17}.Comment: 6 pages, 5 figure

    Pulse shape analysis in segmented detectors as a technique for background reduction in Ge double-beta decay experiments

    Full text link
    The need to understand and reject backgrounds in Ge-diode detector double-beta decay experiments has given rise to the development of pulse shape analysis in such detectors to discern single-site energy deposits from multiple-site deposits. Here, we extend this analysis to segmented Ge detectors to study the effectiveness of combining segmentation with pulse shape analysis to identify the multiplicity of the energy deposits.Comment: 12 pages, 13 figures, will be submitted to NI

    Montane ecosystem productivity responds more to global circulation patterns than climatic trends

    Get PDF
    Ajuts: we thank the support of KIT IMK-IFU, the University of Wisconsin sabbatical leave program, and the Helmholtz Society/MICMOR fellowship program. We also thank the DWD for German weather data. Phenology data were provided by the members of the PEP725 project. We are indebted to the providers and funders of the eddy covariance flux tower observations, the FLUXNET program, and its database. The sites in Graswang, Rottenbuch and Fendt belong to the TERENO and ICOS-ecosystems networks, funded by Bundesministerium für Bildung und Forschung(BMBF)and the Helmholtz Association. The modeling study of SOLVEG was partially supported by Grant-in-Aid for Scientific Research, no. 21120512, provided by the Japan Society for the Promotion of Science(JSPS). This study was financially supported by the Austrian National Science Fund(FWF) under contract P26425 to GW.Regional ecosystem productivity is highly sensitive to inter-annual climate variability, both within and outside the primary carbon uptake period. However, Earth system models lack sufficient spatial scales and ecosystem processes to resolve how these processes may change in a warming climate. Here, we show, how for the European Alps, mid-latitude Atlantic ocean winter circulation anomalies drive high-altitude summer forest and grassland productivity, through feedbacks among orographic wind circulation patterns, snowfall, winter and spring temperatures, and vegetation activity. Therefore, to understand future global climate change influence to regional ecosystem productivity, Earth systems models need to focus on improvements towards topographic downscaling of changes in regional atmospheric circulation patterns and to lagged responses in vegetation dynamics to non-growing season climate anomalies

    Out-of-equilibrium singlet-triplet Kondo effect in a single C_60 quantum dot

    Full text link
    We have used an electromigration technique to fabricate a C60\rm{C_{{60}}} single-molecule transistor (SMT). Besides describing our electromigration procedure, we focus and present an experimental study of a single molecule quantum dot containing an even number of electrons, revealing, for two different samples, a clear out-of-equilibrium Kondo effect. Low temperature magneto-transport studies are provided, which demonstrates a Zeeman splitting of the finite bias anomaly.Comment: 6 pages, 4 figure

    Degradabilidade in situ de híbridos de milho e de capim-elefante colhidos em quatro estádios de maturidade

    Get PDF
    Dentre as forragens, a silagem de milho é amplamente utilizada pelos fazendeiros que visam explorar o máximo do potencial genético dos animais. No entanto, outros volumosos tropicais como o capim-elefante (Pennisetum purpureum) são mais produtivos e, portanto, mais baratos do que a silagem de milho. Nosso objetivo foi comparar a degradabilidade in situ do capim-elefante com a degradabilidade de híbridos de milho, colhidos em quatro estágios de maturidade. O experimento seguiu um delineamento de blocos ao acaso com sub-parcelas. Dois híbridos de milho: AG5011 e ZN8392 foram colhidos com 25, 30, 35 e 40% matéria seca (MS) na planta toda e separados na fração colmo + bainha + folhas e espigas. Capim elefante foi colhido 30, 40, 50 e 60 dias após o corte de nivelamento. As amostras secas e trituradas foram incubadas no rúmen por 0, 6, 12, 24, 48 e 72 h para cálculo da cinética da degradação ruminal da MS e da fibra em detergente neutro (FDN). O avanço da maturidade aumentou os teores de FDN e fibra em detergente ácido (FDA) do capim elefante e reduziu a degradabilidade da MS. Entretanto, a maturidade teve pouco efeito sobre os teores de fibra e a degradabilidade da MS da fração planta dos híbridos de milho. O capim elefante apresentou maior degradabilidade da FDN do que híbridos de milho, e não houve efeito da maturidade sobre a degradabilidade da FDN das duas espécies. A degradabilidade da fibra de capim-elefante não é pior do que a de híbridos de milho e, portanto a escolha da forragem deve ser feita com base em análises econômicas ao invés de assumir um menor potencial de produção em dietas a base de capim elefanteAmong tropical forages, corn silage is largely used by farmers trying to explore the maximum genetic potential from the animals. However, other tropical forages, such as elephant-grass (Pennisetum purpureum), are more productive and therefore cheaper to use than corn silage. Our objective was to compare the in situ degradability of elephant-grass with that from corn hybrids, all harvested at four stages of maturity. The experimental design followed a randomized block design with nested subplots. Two corn hybrids: AG5011, ZN8392 were harvested with 25, 30, 35, and 40% dry matter (DM) in the whole plant, and separated in stem + leaf sheath + leaf blade (stover), and cobs. Elephant-grass was harvested with 30, 40, 50 and 60 days after a leveling cut. Dried and ground samples were incubated in nylon bags inside the rumen for 0, 6, 12, 24, 48 and 72 h to estimate the kinetics of ruminal DM and neutral detergent fiber (NDF) degradation. The advance of maturity increased the NDF and acid detergent fiber (ADF) content in elephant-grass, and reduced its DM degradability. However, maturity had little or no effect on fiber content and DM degradability of corn stover. Elephant-grass had a higher NDF degradability than corn stover, and there was no effect of maturity on NDF degradability of either elephant-grass or corn stover. Fiber degradability of elephant-grass was not worse than that of corn stover, and therefore the choice of forage should be made on economical analysis rather than assuming an intrinsic low production potential for elephant-grass based diet

    Monte Carlo Methods for Estimating Interfacial Free Energies and Line Tensions

    Full text link
    Excess contributions to the free energy due to interfaces occur for many problems encountered in the statistical physics of condensed matter when coexistence between different phases is possible (e.g. wetting phenomena, nucleation, crystal growth, etc.). This article reviews two methods to estimate both interfacial free energies and line tensions by Monte Carlo simulations of simple models, (e.g. the Ising model, a symmetrical binary Lennard-Jones fluid exhibiting a miscibility gap, and a simple Lennard-Jones fluid). One method is based on thermodynamic integration. This method is useful to study flat and inclined interfaces for Ising lattices, allowing also the estimation of line tensions of three-phase contact lines, when the interfaces meet walls (where "surface fields" may act). A generalization to off-lattice systems is described as well. The second method is based on the sampling of the order parameter distribution of the system throughout the two-phase coexistence region of the model. Both the interface free energies of flat interfaces and of (spherical or cylindrical) droplets (or bubbles) can be estimated, including also systems with walls, where sphere-cap shaped wall-attached droplets occur. The curvature-dependence of the interfacial free energy is discussed, and estimates for the line tensions are compared to results from the thermodynamic integration method. Basic limitations of all these methods are critically discussed, and an outlook on other approaches is given

    Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

    Get PDF
    This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

    Superhard Phases of Simple Substances and Binary Compounds of the B-C-N-O System: from Diamond to the Latest Results (a Review)

    Full text link
    The basic known and hypothetic one- and two-element phases of the B-C-N-O system (both superhard phases having diamond and boron structures and precursors to synthesize them) are described. The attention has been given to the structure, basic mechanical properties, and methods to identify and characterize the materials. For some phases that have been recently described in the literature the synthesis conditions at high pressures and temperatures are indicated.Comment: Review on superhard B-C-N-O phase

    Search for supersymmetry in final states with jets, missing transverse momentum and one isolated lepton in sqrt{s} = 7 TeV pp collisions using 1 fb-1 of ATLAS data

    Get PDF
    We present an update of a search for supersymmetry in final states containing jets, missing transverse momentum, and one isolated electron or muon, using 1.04 fb^-1 of proton-proton collision data at sqrt{s} = 7 TeV recorded by the ATLAS experiment at the LHC in the first half of 2011. The analysis is carried out in four distinct signal regions with either three or four jets and variations on the (missing) transverse momentum cuts, resulting in optimized limits for various supersymmetry models. No excess above the standard model background expectation is observed. Limits are set on the visible cross-section of new physics within the kinematic requirements of the search. The results are interpreted as limits on the parameters of the minimal supergravity framework, limits on cross-sections of simplified models with specific squark and gluino decay modes, and limits on parameters of a model with bilinear R-parity violation.Comment: 18 pages plus author list (30 pages total), 9 figures, 4 tables, final version to appear in Physical Review

    Reducing heterotic M-theory to five dimensional supergravity on a manifold with boundary

    Get PDF
    This paper constructs the reduction of heterotic MM-theory in eleven dimensions to a supergravity model on a manifold with boundary in five dimensions using a Calabi-Yau three-fold. New results are presented for the boundary terms in the action and for the boundary conditions on the bulk fields. Some general features of dualisation on a manifold with boundary are used to explain the origin of some topological terms in the action. The effect of gaugino condensation on the fermion boundary conditions leads to a `twist' in the chirality of the gravitino which can provide an uplifting mechanism in the vacuum energy to cancel the cosmological constant after moduli stabilisation.Comment: 16 pages, RevTe
    corecore