Experimental studies of the effect of rapid afterburn on shock development of near-field explosions

Many conventional high explosives do not contain sufficient internal oxygen to fully combust the gaseous products which result from detonation of the explosive material. Because of this, under-oxygenated explosives continue to burn after detonation. This process, called afterburn, is known to influence the late-time pressure and energy released by the explosive, which has particular significance for confined explosives. Recent experimental work at the University of Sheffield, along with a small number of previous studies, has shown that some afterburn occurs at timescales commensurate with the development of the shock wave. This article presents the results from a series of tests measuring the reflected pressure acting on a rigid target following the detonation of small explosive charges. High-speed video is used to capture the emerging structure of the detonation products and air shock, while the spatial and temporal distributions of the reflected pressure are recorded using an array of 17 Hopkinson pressure bars set flush with an effectively rigid target. Tests are conducted in inert atmospheres and oxygen-rich atmospheres in order to assess the contribution of rapid afterburn on the development of the shock front and interaction with a rigid target situated close to the explosive charge. The results show that early-stage afterburn has a significant influence on the reflected shock parameters in the near-field

Predicting the response of plates subjected to near-field explosions using an energy equivalent impulse

Recent experimental work by the current authors has provided highly spatially and temporally resolved measurements of the loading imparted to, and the subsequent dynamic response of, structures subjected to near-field explosive loading [1]. In this article we validate finite element models of plates subjected to near-field blast loads and perform a parametric study into the relationship between imparted load and peak and residual plate deformation. The energy equivalent impulse is derived, based on the theory of upper bound kinetic energy uptake introduced herein, which accounts for the additional energy imparted to a structure from a spatially non-uniform blast load. Whilst plate deflection is weakly correlated to total impulse, there is shown to be a strong positive correlation between deflection and energy equivalent impulse. The strength of this correlation is insensitive to loading distribution and mode of response. The method developed in this article has clear applications for the generation of fast-running engineering tools for the prediction of structural response to near-field explosions

Finite element simulation of plates under non-uniform blast loads using a point-load method: Buried explosives

There are two primary challenges associated with assessing the adequacy of a protective structure to resist explosive events: firstly the spatial variation of load acting on a target must be predicted to a sufficient level of accuracy; secondly, the response of the target to this load must also be quantified. When a high explosive is shallowly buried in soil, the added confinement given by the geotechnical material results in a blast which is predominantly directed vertically. This imparts an extremely high magnitude, spatially non-uniform load on the target structure. A recently commissioned experimental rig designed by the authors has enabled direct measurements of the blast load resulting from buried explosive events. These direct measurements have been processed using an in-house interpolation routine which evaluates the load acting over a regular grid of points. These loads can then be applied as the nodal-point loads in a finite element model. This paper presents results from a series of experiments where a free-flying plate was suspended above a shallow buried explosive. Dynamic and residual deformations are compared with finite element simulations of plates using the experimentally recorded, and interpolated, nodal point-loads. The results show very good agreement and highlight the use of this method for evaluating the efficacy of targets subjected to non-uniform blast loads

Predicting specific impulse distributions for spherical explosives in the extreme near-field using a Gaussian function

Accurate quantification of the blast load arising from detonation of a high explosive has applications in transport security, infrastructure assessment and defence. In order to design efficient and safe protective systems in such aggressive environments, it is of critical importance to understand the magnitude and distribution of loading on a structural component located close to an explosive charge. In particular, peak specific impulse is the primary parameter that governs structural deformation under short-duration loading. Within this so-called extreme near-field region, existing semi-empirical methods are known to be inaccurate, and high-fidelity numerical schemes are generally hampered by a lack of available experimental validation data. As such, the blast protection community is not currently equipped with a satisfactory fast-running tool for load prediction in the near-field. In this article, a validated computational model is used to develop a suite of numerical near-field blast load distributions, which are shown to follow a similar normalised shape. This forms the basis of the data-driven predictive model developed herein: a Gaussian function is fit to the normalised loading distributions, and a power law is used to calculate the magnitude of the curve according to established scaling laws. The predictive method is rigorously assessed against the existing numerical dataset, and is validated against new test models and available experimental data. High levels of agreement are demonstrated throughout, with typical variations of <5% between experiment/model and prediction. The new approach presented in this article allows the analyst to rapidly compute the distribution of specific impulse across the loaded face of a wide range of target sizes and near-field scaled distances and provides a benchmark for data-driven modelling approaches to capture blast loading phenomena in more complex scenarios

Far-field positive phase blast parameter characterisation of RDX and PETN based explosives

A significant amount of scientific effort has been dedicated to measuring and understanding the effects of explosions, leading to the development of semi-empirical methods for rapid prediction of blast load parameters. The most well-known of these, termed the Kingery and Bulmash method, makes use of polylogarithmic curves derived from a compilation of medium to large scale experimental tests performed over many decades. However, there is still no general consensus on the accuracy and validity of this approach, despite some researchers reporting consistently high levels of agreement. Further, it is still not known whether blast loading can be considered deterministic, or whether it is intrinsically variable, the extent of this variability, and the range and scales over which these variations are observed. This article critically reviews historic and contemporary blast experiments, including newly generated arena tests with RDX and PETN-based explosives, with a view to demonstrating the accuracy with which blast load parameters can be predicted using semi-empirical approaches

Do COPD patients taught pursed lips breathing (PLB) for dyspnoea management continue to use the technique long-term? A mixed methodological study

© 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved. This manuscript is made available under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0). For further details please see: https://creativecommons.org/licenses/by-nc-nd/4.0/Objective : To investigate whether COPD patients taught pursed lips breathing (PLB) for dyspnoea management continue to use the technique long-term and, if so, their experience of this.Design : A mixed methodological approach using semi-structured telephone interviews, a focus group and observation of current PLB technique was used. Qualitative analysis was based on grounded theorySetting : Participants were recruited from the two inner city London (UK) boroughsParticipants : A purposive sample of 13 patients with COPD taught PLB 6 - 24 months previously. 11 participants took part in the telephone interviews; focus group participation and observed PLB was 5/11 and 6/11 respectively.Main outcome measures : A thematic analysis of interviews and focus group; observation of PLB technique.Results : Nine reported on-going use of PLB with 8 reporting definite benefit. Observed technique showed ongoing ability for PLB to reduce RR and increase SpO2. Four distinct themes emerged from the data: use of PLB when short of breath due to physical activity (8/9), increased confidence and reduced panic (4/9), use as an exercise (3/9), use at night (3/9). Those that had discontinued PLB had done so because it didn’t help (2) and they had forgotten/were too busy to continue.Conclusion : This study found 9 of 13 of patients taught PLB continued with long-term use and 8 of 13 reporting definite benefit from PLB. The role of PLB in increasing patients’ confidence in their ability to manage their breathlessness and, use at night, were novel findings.Peer reviewedFinal Accepted Versio

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Jet size dependence of single jet suppression in lead-lead collisions at sqrt(s(NN)) = 2.76 TeV with the ATLAS detector at the LHC

Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at sqrt(s) = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |eta| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-kt algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," Rcp. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. Rcp varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.Comment: 15 pages plus author list (30 pages total), 8 figures, 2 tables, submitted to Physics Letters B. All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HION-2011-02

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio

Observation of a new chi_b state in radiative transitions to Upsilon(1S) and Upsilon(2S) at ATLAS

The chi_b(nP) quarkonium states are produced in proton-proton collisions at the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV and recorded by the ATLAS detector. Using a data sample corresponding to an integrated luminosity of 4.4 fb^-1, these states are reconstructed through their radiative decays to Upsilon(1S,2S) with Upsilon->mu+mu-. In addition to the mass peaks corresponding to the decay modes chi_b(1P,2P)->Upsilon(1S)gamma, a new structure centered at a mass of 10.530+/-0.005 (stat.)+/-0.009 (syst.) GeV is also observed, in both the Upsilon(1S)gamma and Upsilon(2S)gamma decay modes. This is interpreted as the chi_b(3P) system.Comment: 5 pages plus author list (18 pages total), 2 figures, 1 table, corrected author list, matches final version in Physical Review Letter