Design of an electroflotation system for the concentration and harvesting of freshwater microalgae

Microalgae are considered as one of the most promising alternatives for the integrated use of agro-industrial water residues and the production of metabolites of high industrial interest. This is due to algae can grow on wastewater which in turn can reduce the emission of nutrients to rivers and lakes. However, the greatest scientific-technological barrier is the concentration and separation of the biomass produced. There are several processes used at different levels (from laboratory to industrial scale) such as flocculation, centrifugation, flotation, etc. These can be very expensive or can (possibly) contaminate the biomass. Unlike the previous ones, electroflotation has been proposed as a cost-efficient method, nevertheless its final efficiency will depend heavily on the type of alga and culture medium. Taking into account the above, the present project aims to design an electroflotation system for the concentration and harvest of microalgae biomass. The effect of several factors (pH, time, voltage and distance between the electrodes) and for types of materials (Copper, Aluminium, Iron and Steel) on biomass recovery efficiency from a culture of Chlorella vulgaris UTEX 1803 was evaluated by the implementation of a Design of experiments (43 non-factorial design) using STATISTICA 7.0. Results show that, the materials with higher concentration efficiency were cooper and aluminium with 40 and 80% respectively, and the most relevant factors were distance between electrodes (1-2 cm), time (>20 min) and Voltage (>15V). In order to increase the efficiency of the overall process a new 43 experimental factorial design was proposed using as factors distance between electrodes, time, voltage and agitation. Results show that agitation positively affects the total efficiency until reaching a total concentration of the biomass (100%). It was found that a voltage close to 50V and a time greater than 25 min positively affect the final efficiency of the copper and aluminium electrodes, however aluminium has the highest efficiency (> 95%) compared to copper (<85%)

Production of chlorella vulgaris biomass on uv-treated wastewater as an alternative for environmental sustainability on high-mountain fisheries

The sustained expansion of agricultural industry in Colombian high-mountain has led to an increased size of residues, especially untreated wastewater. This untreated water is an urgent matter for public and environmental health, not only by its nutrient concentration (composed especially of food residuals and feces) but also the presence of pathogens (virus, bacteria, etc.) which are discharged to the environment. The overall objective of this work is to evaluate the effect of UV-treated wastewater from a high-mountain fishery as culture media for the production of Chlorella vulgaris as a sustainable method for nutrient and water recirculation on the fishery production system. The UV-canal efficiency was evaluated by the implementation of an experimental factorial design (time, distance of the UV-lamps towards the canal, number of UV-lamps and the sample concentration) using STATISTICA 7.0 software. Results shown that time (3 to 5 minutes) and the number of lamps (3-4) of 15 Watts eliminate completely coliforms from the samples. After UV-treatment the resulting water was test as culture media for C. vulgaris production by the adjustment of C/N ratio (Sodium Carbonate/potassium nitrate) by the implementation of an experimental 23 factorial design. Results shown that higher nitrate concentrations (>0,22 g/L) and moderate carbonate concentrations (1 g/L) increase the final biomass concentration up to 4g/L in 20 days

A simulation analysis of a microalgal-production plant for the transformation of inland-fisheries wastewater in sustainable feed

The present research evaluates the simulation of a system for transforming inland-fisheries wastewater into sustainable fish feed using Designer® software. The data required were obtained from the experimental cultivation of Chlorella sp. in wastewater supplemented with N and P. According to the results, it is possible to produce up to 11,875 kg/year (31.3 kg/d) with a production cost of up to 18 (USD/kg) for dry biomass and 0.19 (USD/bottle) for concentrated biomass. Similarly, it was possible to establish the kinetics of growth of substrate-dependent biomass with a maximum production of 1.25 g/L after 15 days and 98% removal of available N coupled with 20% of P. It is essential to note the final production efficiency may vary depending on uncontrollable variables such as climate and quality of wastewater, among others

A simulation analysis of an influenza vaccine production plant in areas of high humanitarian flow. A preliminary study for the region of norte de santander (colombia)

The production of vaccines of biological origin presents a tremendous challenge for re-searchers. In this context, animal cell cultures are an excellent alternative for the isolation and production of biologicals against several viruses, since they have an affinity with viruses and a great capacity for their replicability. Different variables have been studied to know the system’s ideal parameters, allowing it to obtain profitable and competitive products. Consequently, this work fo-cuses its efforts on evaluating an alternative for producing an anti‐influenza biological from MDCK cells using SuperPro Designer v8.0 software. The process uses the DMEN culture medium supple-mented with nutrients as raw material for cell development; the MDCK cells were obtained from a potential scale‐up with a final working volume of 500 L, four days of residence time, inoculum volume of 10%, and continuous working mode with up to a total of 7400 h/Yr of work. The scheme has the necessary equipment for the vaccine’s production, infection, and manufacture with yields of up to 416,698 units/h. In addition, it was estimated to be economically viable to produce recom-binant vaccines with competitive prices of up to 0.31 USD/unit

The effect of LEDs on biomass and phycobiliproteins production in thermotolerant oscillatoria sp

Featured Application: The selection of LEDs wavelength, intensity, and light: Dark cycle positively enhances the biomass production and phycocyanin synthesis in Oscillatoria sp. This study evaluates the role of different LED lights (white, blue/red), intensity (µmol m−2 s−1), and photoperiod in the production of biomass and phycocyanin-C, allophycocyanin and phycoerythrin (C-PC, APC, and PE respectively) from a novel thermotolerant strain of Oscillatoria sp. Results show that a mixture of white with blue/red LEDs can effectively double the biomass concentration up to 1.3 g/L, while the concentration of the selected phycobiliproteins increased proportionally to biomass. Results also indicate that high light intensities (>120 µmol m−2 s−1) can diminish the final concentration of C-PC, APC, and PE, significantly reducing the overall biomass produced. Finally, the photoperiod analysis showed that longer light exposure times (18:6 h) improved both biomass and phycobiliproteins concentration. These results demonstrate that the application of LEDs to produce a novel strain of Oscillatoria sp can double the biomass concentration, and the photoperiod regulation can eventually enhance the final concentration of specific phycobiliproteins such as APC and PE

Evidence that abscisic acid promotes degradation of SNF1-related protein kinase (SnRK) 1 in wheat and activation of a putative calcium-dependent SnRK2

Sucrose nonfermenting-1 (SNF1)-related protein kinases (SnRKs) form a major family of signalling proteins in plants and have been associated with metabolic regulation and stress responses. They comprise three subfamilies: SnRK1, SnRK2, and SnRK3. SnRK1 plays a major role in the regulation of carbon metabolism and energy status, while SnRKs 2 and 3 have been implicated in stress and abscisic acid (ABA)-mediated signalling pathways. The burgeoning and divergence of this family of protein kinases in plants may have occurred to enable cross-talk between metabolic and stress signalling, and ABA-response-element-binding proteins (AREBPs), a family of transcription factors, have been shown to be substrates for members of all three subfamilies. In this study, levels of SnRK1 protein were shown to decline dramatically in wheat roots in response to ABA treatment, although the amount of phosphorylated (active) SnRK1 remained constant. Multiple SnRK2-type protein kinases were detectable in the root extracts and showed differential responses to ABA treatment. They included a 42 kDa protein that appeared to reduce in response to 3 h of ABA treatment but to recover after longer treatment. There was a clear increase in phosphorylation of this SnRK2 in response to the ABA treatment. Fractions containing this 42 kDa SnRK2 were shown to phosphorylate synthetic peptides with amino acid sequences based on those of conserved phosphorylation sites in AREBPs. The activity increased 8-fold with the addition of calcium chloride, indicating that it is calcium-dependent. The activity assigned to the 42 kDa SnRK2 also phosphorylated a heterologously expressed wheat AREBP

Circuit reliability prediction: Challenges and solutions for the device time-dependent variability characterization roadblock

Copyright IEEEThe characterization of the MOSFET Time-Dependent Variability (TDV) can be a showstopper for reliability-Aware circuit design in advanced CMOS nodes. In this work, a complete MOSFET characterization flow is presented, in the context of a physics-based TDV compact model, that addresses the main TDV characterization challenges for accurate circuit reliability prediction at design time. The pillars of this approach are described and illustrated through examples.This work was supported by the VIGILANT Project (PID2019-103869RB / AEI / 10.13039/501100011033) and the TEC2016-75151-C3-R Project (AEI/FEDER, UE).Peer reviewe

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS

The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30