54 research outputs found

    Proton conductivity of multifunctional metal phosphonate frameworks

    Get PDF
    Metal phosphonates exhibit attractive characteristics for proton conductivity, such as tunable functionality, chemical and thermal stability and the existence of H-bond networks with acidic protons within their structure.1 In the present work, we examine the relationship between crystal structure and proton conductivity for several metal (mono-, di- and tri-valent) phosphonates containing rigid: (5-(dihydroxyphosphoryl)isophthalic acid, PiPhtA and 2-hydroxyphosphonoacetic acid, HPAA) or flexible: (hexa- or octamethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid, H8HDTMP or H8ODTMP) multifunctional ligands. The crystalline hybrid derivatives prepared show a great structural diversity, from 1D to 3D open-frameworks possessing hydrogen-bonded water molecules and phosphonic and carboxylic acid groups. The rigid 3D framework of Ca-PiPhtA, that exhibits a proton conductivity of 5.7•10-4 S/cm as synthesized, transforms into a layered compound upon exposure to ammonia vapors2 with increased proton conductivity (6.6•10-3 S/cm). The flexible frameworks of magnesium or lanthanide phosphonates, with 1D channels, present conductivities higher than 10-3 S/cm. Their activation energies fall in the range corresponding to a Grotthuss mechanism.3,4 For M(I)-HPAA solids conductivities up to 5.6•10-3 S/cm were measured. References 1. P. Ramaswamy, N.E. Wong, G.K.H. Shimizu, Chem. Soc. Rev. 43 (2014) 5913. 2. M. Bazaga-García, R.M.P. Colodrero, M. Papadaki, P. Garczarek, J. Zoń, P. Olivera-Pastor, E.R. Losilla, L. León-Reina, M.A.G. Aranda, D. Choquesillo-Lazarte, K.D. Demadis, A. Cabeza, J. Amer. Chem. Soc. 136 (2014) 5731. 3. R.M.P. Colodrero, P. Olivera-Pastor, E.R. Losilla, D. Hernández-Alonso, M.A.G. Aranda, L. Leon-Reina, J. Rius, K.D. Demadis, B. Moreau, D. Villemin, M. Palomino, F. Rey, A. Cabeza, Inorg. Chem. 51 (2012) 7689. 4. R.M.P. Colodrero, P. Olivera-Pastor, E.R. Losilla, M.A.G. Aranda, L. Leon-Reina, M. Papadaki, A.C. McKinlay, R.E. Morris, K.D. Demadis, A. Cabeza, Dalton Trans. 41 (2012) 4045.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. Junta de Andalucía, Proyecto Excelencia FQM-1656. Ministerio de Economía y Competitividad, MAT2013-41836-

    Buenas prácticas aplicadas a la adquisición de competencias diagnósticas clínicas en el ámbito del lenguaje

    Get PDF
    En el presente trabajo se presenta una herramienta informática para el aprendizaje virtual simulado de competencias diagnósticas clínicas en el ámbito de las buenas prácticas en Ciencias de la Salud. La herramienta denominada LATS (Language Assessment Training System) pretende capacitar a los discentes del Grado en Logopedia para el diagnóstico clínico en el área del lenguaje y de la comunicación a partir de casos clínicos virtuales. Los casos clínicos virtuales cuentan con una serie de ventajas: se pueden realizar sin limitación de horarios, se pueden solicitar información de cada una de las fases del proceso diagnóstico tantas veces como consideremos oportuno, los datos de los tests estandarizados se encuentran a disposición del usuario siempre que los necesite. La herramienta dispone de 5 fases que son: motivo de consulta, anamnesis, hipótesis de partida, pruebas diagnósticas, diagnóstico final. La herramienta LATS propicia las buenas prácticas, ya que mejora el rendimiento, está fundamentada en una sólida experiencia previa y se plantea desde un enfoque innovador

    Heat treatment of cold-sprayed C355 Al for repair: microstructure and mechanical properties

    Get PDF
    Cold gas dynamic spraying of commercially pure aluminum is widely used for dimensional repair in the aerospace sector as it is capable of producing oxide-free deposits of hundreds of micrometer thickness with strong bonding to the substrate, based on adhesive pull-off tests, and often with enhanced hardness compared to the powder prior to spraying. There is significant interest in extending this application to structural, load-bearing repairs. Particularly, in the case of high-strength aluminum alloys, cold spray deposits can exhibit high levels of porosity and microcracks, leading to mechanical properties that are inadequate for most load-bearing applications. Here, heat treatment was investigated as a potential means of improving the properties of cold-sprayed coatings from Al alloy C355. Coatings produced with process conditions of 500 °C and 60 bar were heat-treated at 175, 200, 225, 250 °C for 4 h in air, and the evolution of the microstructure and microhardness was analyzed. Heat treatment at 225 and 250 °C revealed a decreased porosity (~ 0.14% and 0.02%, respectively) with the former yielding slightly reduced hardness (105 versus 130 HV0.05 as-sprayed). Compressive residual stress levels were approximately halved at all depths into the coating after heat treatment, and tensile testing showed an improvement in ductility

    Influence of fly ash blending on hydration and physical behavior of Belite-Alite-Ye'elimite cements

    Get PDF
    A cement powder, composed of belite, alite and ye’elimite, was blended with 0, 15 and 30 wt% of fly ash and the resulting lended cements were further characterized. During hydration, the presence of fly ash caused the partial inhibition of both AFt degradation and belite reactivity, even after 180 days. The compressive strength of the corresponding mortars increased by increasing the fly ash content (68, 73 and 82 MPa for mortars with 0, 15 and 30 wt% of fly ash, respectively, at 180 curing days), mainly due to the diminishing porosity and pore size values. Although pozzolanic reaction has not been directly proved there are indirect evidences.This work is part of the Ph.D. of D. Londono-Zuluaga funded by Beca Colciencias 646—Doctorado en el exterior and Enlaza Mundos 2013 program grant. Cement and Building materials group (CEMATCO) from National University of Colombia is acknowledged for providing the calorimetric measurements. Funding from Spanish MINECO BIA2017-82391-R and I3 (IEDI-2016-0079) grants, co-funded by FEDER, are acknowledged

    Guest Molecule-Responsive Functional Calcium Phosphonate Frameworks for Tuned Proton Conductivity

    Get PDF
    We report the synthesis, structural characterization, and functionality of an open-framework hybrid that combines Ca2+ ions and the rigid polyfunctional ligand 5-(dihydroxyphosphoryl) isophthalic acid (PiPhtA). Ca-PiPhtA-I is obtained by slow crystallization at ambient conditions from acidic (pH≈3) aqueous solutions. It possesses a high water content (both Ca coordinated and in the lattice), and importantly, it exhibits water-filled 1D channels. At 75 °C, Ca-PiPhtA-I is partially dehydrated and exhibits a crystalline diffraction pattern that can be indexed in a monoclinic cell with parameters close to the pristine phase. Rietveld refinement was carried out for the sample heated at 75 °C, Ca-PiPhtA-II, using synchrotron powder X-ray diffraction data.All connectivity modes of the “parent” Ca-PiPhtA-I framework are retained in Ca-PiPhtA-II. Upon Ca-PiPhtA-I exposure to ammonia vapors (28% aqueous NH3) a new derivative is obtained (Ca-PiPhtA-NH3) containing 7 NH3 and 16 H2O molecules according to elemental and thermal analyses. Ca-PiPhtA-NH3 exhibits a complex X-ray diffraction pattern with peaks at 15.3 and 13.0 Å that suggest partial breaking and transformation of the parent pillared structure. Although detailed structural identification of Ca-PiPhtA-NH3 was not possible, due in part to nonequilibrium adsorption conditions and the lack of crystallinity, FT-IR spectra and DTA-TG analysis indicate profound structural changes compared to the pristine Ca-PiPhtA-I. At 98% RH and T = 24 °C, proton conductivity, σ, for Ca PiPhtA-I is 5.7 ×10−4 S·cm−1. It increases to 1.3 × 10−3 S·cm−1 upon activation by preheating the sample at 40 °C for 2 h followed by water equilibration at room temperature under controlled conditions. Ca-PiPhtA-NH3 exhibits the highest proton conductivity, 6.6 × 10−3 S·cm−1, measured at 98% RH and T = 24 °C. Ea for proton transfer in the above-mentioned frameworks range between 0.23 and 0.4 eV, typical of a Grothuss mechanism of proton conduction.Proyecto nacional MAT2010-1517

    Contributions of mean and shape of blood pressure distribution to worldwide trends and variations in raised blood pressure: A pooled analysis of 1018 population-based measurement studies with 88.6 million participants

    Get PDF
    © The Author(s) 2018. Background: Change in the prevalence of raised blood pressure could be due to both shifts in the entire distribution of blood pressure (representing the combined effects of public health interventions and secular trends) and changes in its high-blood-pressure tail (representing successful clinical interventions to control blood pressure in the hypertensive population). Our aim was to quantify the contributions of these two phenomena to the worldwide trends in the prevalence of raised blood pressure. Methods: We pooled 1018 population-based studies with blood pressure measurements on 88.6 million participants from 1985 to 2016. We first calculated mean systolic blood pressure (SBP), mean diastolic blood pressure (DBP) and prevalence of raised blood pressure by sex and 10-year age group from 20-29 years to 70-79 years in each study, taking into account complex survey design and survey sample weights, where relevant. We used a linear mixed effect model to quantify the association between (probittransformed) prevalence of raised blood pressure and age-group- and sex-specific mean blood pressure. We calculated the contributions of change in mean SBP and DBP, and of change in the prevalence-mean association, to the change in prevalence of raised blood pressure. Results: In 2005-16, at the same level of population mean SBP and DBP, men and women in South Asia and in Central Asia, the Middle East and North Africa would have the highest prevalence of raised blood pressure, and men and women in the highincome Asia Pacific and high-income Western regions would have the lowest. In most region-sex-age groups where the prevalence of raised blood pressure declined, one half or more of the decline was due to the decline in mean blood pressure. Where prevalence of raised blood pressure has increased, the change was entirely driven by increasing mean blood pressure, offset partly by the change in the prevalence-mean association. Conclusions: Change in mean blood pressure is the main driver of the worldwide change in the prevalence of raised blood pressure, but change in the high-blood-pressure tail of the distribution has also contributed to the change in prevalence, especially in older age groups

    Diseño para el desarrollo sustentable y la habitabilidad segura e incluyente

    Get PDF
    Este libro se divide en dos partes que permiten permear en el campo de la enseñanza del diseño; la primera se enfoca en temáticas que se desprenden del diseño en la educación para la sustentabilidad; en la segunda, se identifican las tendencias del diseño como un modo de verlo y sentirlo: va desde el diseño emocional hacia uno de conservación, reúso y reparación de objetos para reducir el consumo de recursos materiales

    XVI International Congress of Control Electronics and Telecommunications: "Techno-scientific considerations for a post-pandemic world intensive in knowledge, innovation and sustainable local development"

    Get PDF
    Este título, sugestivo por los impactos durante la situación de la Covid 19 en el mundo, y que en Colombia lastimosamente han sido muy críticos, permiten asumir la obligada superación de tensiones sociales, políticas, y económicas; pero sobre todo científicas y tecnológicas. Inicialmente, esto supone la existencia de una capacidad de la sociedad colombiana por recuperar su estado inicial después de que haya cesado la perturbación a la que fue sometida por la catastrófica pandemia, y superar ese anterior estado de cosas ya que se encontraban -y aún se encuentran- muchos problemas locales mal resueltos, medianamente resueltos, y muchos sin resolver: es decir, habrá que rediseñar y fortalecer una probada resiliencia social existente - producto del prolongado conflicto social colombiano superado parcialmente por un proceso de paz exitoso - desde la tecnociencia local; como lo indicaba Markus Brunnermeier - economista alemán y catedrático de economía de la Universidad de Princeton- en su libro The Resilient Society…La cuestión no es preveerlo todo sino poder reaccionar…aprender a recuperarse rápido.This title, suggestive of the impacts during the Covid 19 situation in the world, and which have unfortunately been very critical in Colombia, allows us to assume the obligatory overcoming of social, political, and economic tensions; but above all scientific and technological. Initially, this supposes the existence of a capacity of Colombian society to recover its initial state after the disturbance to which it was subjected by the catastrophic pandemic has ceased, and to overcome that previous state of affairs since it was found -and still is find - many local problems poorly resolved, moderately resolved, and many unresolved: that is, an existing social resilience test will have to be redesigned and strengthened - product of the prolonged Colombian social conflict partially overcome by a successful peace process - from local technoscience; As Markus Brunnermeier - German economist and professor of economics at Princeton University - indicates in his book The Resilient Society...The question is not to foresee everything but to be able to react...learn to recover quickly.Bogot
    corecore