Análisis bibliométrico de las publicaciones científicas españolas en la categoría Construction & Building Technology de la base de datos Web of Science (1997-2008)

En este trabajo se analizan las publicaciones procedentes de instituciones españolas recogidas en las revistas de la categoría Construction & Building Technology de la base de datos Web of Science para el periodo 1997-2008. El número de revistas incluidas es de 35 y el número de artículos publicados ha sido de 760 (Article o Review). Se ha realizado una evaluación bibliométrica con dos nuevos parámetros: Factor de Impacto Ponderado y Factor de Impacto Relativo; asimismo se incluyen el número de citas y el número de documentos a nivel institucional. Entre los centros con una mayor producción científica destaca, como era de prever, el Instituto de Ciencias de la Construcción Eduardo Torroja (CSIC), mientras que atendiendo al Factor de Impacto Ponderado ocupa el primer lugar la Universidad de Vigo. Por otro lado, sólo dos revistas Cement and Concrete Research y Materiales de Construcción aglutinan el 45.26% de toda la producción científica española, con 172 trabajos cada una de ellas. En cuanto a la colaboración internacional, destacan países como Inglaterra, México, Estados Unidos, Italia, Argentina y Franci

Análisis bibliométrico mundial de BIM a través de la colección principal de la Web of Science (2003-2017)

The main objective is to perform a quantitative and qualitative analysis from the institutional point of view of the related research on Building Information Modeling (BIM) collected in the Web of Science Core Collection during the period 2003- 2017. For this, all documents of the type ‘article’ or ‘review’ were reviewed and several bibliometric indicators analyzed. Similarly, the international dissemination of the research of the 16 most productive countries was analyzed, indicating the publication journals of each country and concluding that the main journals. USA is the most productive country although with a relative impact factor slightly higher than average due to the dispersion of its publications in journals of medium or low impact. It also shows how Curtin University (Australia) and the Georgia Institute of Technology (USA) have been the most productive and high impact institutions, although the outstanding rise of Hong Kong Polytechnic University is noted.El principal objetivo es realizar un análisis cuantitativo y cualitativo desde el punto de vista institucional de la investigación relacionada con BIM presente en la colección principal de la Web of Science durante el período 2003-2017. Para ello, fueron revisados los registros del tipo ‘artículo’ o ‘revisión’ y se analizaron diferentes indicadores bibliométricos. La difusión internacional de investigación de los 16 países más productivos fue analizada, indicando las revistas de publicación de cada país, así como las principales revistas. Asimismo, EE.UU. es el país más productivo, aunque con un factor de impacto relativo algo mayor que la media debido a la dispersión de sus publicaciones en revistas de medio y bajo impacto, y la Universidad de Curtin (Australia) y el Instituto de Tecnología de Georgia (EE.UU.) son las instituciones más productivas y con alto impacto, sobresaliendo también la Universidad Politécnica de Hong Kong

La esclusa de émbolo buzo de Agustín de Betancourt: Análisis de su construcción mediante ingeniería asistida por ordenador

The objective of this research is to analyze the construction of the plunger lock designed by Agustin de Betancourt in 1807. For this, a computer-aided engineering (CAE) study has been conducted, namely a static analysis by finite-elements method from the three-dimensional model built with computer-aided design (CAD) techniques using Autodesk Inventor Professional parametric software. The results show that the most unfavorable position occurs when the plunger is lifted, as in this position the elastic limits of the materials are exceeded. Therefore, the main conclusion is that the plunger lock is poorly dimensioned, although this is because the specifications sheets had only a functional or descriptive value, since the plunger lock was never put into practice. In any case, the Spanish engineer designed a novel diver-plunger lock-balance system.El objetivo de esta investigación ha sido analizar la esclusa de émbolo buzo diseñada por Agustín de Betancourt y Molina en 1807. Para ello, se ha realizado un estudio de ingeniería asistida por ordenador, concretamente un análisis estático por elementos finitos basado en el modelo tridimensional obtenido con técnicas de diseño asistido por ordenador mediante el software paramétrico Autodesk Inventor Professional, a partir de la planimetría original del expediente. Los resultados muestran que la posición más desfavorable ocurre cuando el émbolo buzo está completamente levantado, sobrepasándose los límites de elasticidad de los materiales. Por tanto, la conclusión principal es que la esclusa está mal dimensionada, aunque esto se debe a que las láminas sólo tenían un valor funcional o descriptivo, no habiendo sido llevada nunca a la práctica dicha esclusa. Sin embargo, el ingeniero español diseña un novedoso sistema de equilibrio émbolo buzo-contrapeso

La máquina eólica para desaguar terrenos pantanosos de Agustín de Betancourt y Molina: análisis de su construcción mediante ingeniería asistida por ordenador

The objective of this research is to analyze the construction of the wind machine for draining marshy ground designed by Agustin de Betancourt and Molina in 1789. To do this, a static analysis by finite elements method from the threedimensional model obtained with Autodesk Inventor Professional has been performed. The results show that the greatest stresses of the mechanism take place when the main shaft is meshed with the cogwheel, namely the point of contact between the worm screw and cogwheel. However, the maximum displacements and the greatest deformations take place in the blades. In addition, the mechanism is oversized, reaching at no point the tensile strength of the material, confirming the successful construction of this historical invention.El objetivo de esta investigación ha sido analizar la construcción de la máquina eólica para desaguar terrenos pantanosos diseñada por Agustín de Betancourt y Molina en 1789. Para ello, se ha realizado un análisis estático por elementos finitos a partir del modelo tridimensional obtenido con Autodesk Inventor Professional. Los resultados muestran que las mayores tensiones del mecanismo se producen cuando el eje principal está engranado con la corona dentada, concretamente, en el punto de contacto entre el tornillo sinfín y dicha corona. Sin embargo, los máximos desplazamientos y las mayores deformaciones tienen lugar en las palas impulsoras. Asimismo, el mecanismo está sobredimensionado, no alcanzando en ningún punto la tensión de rotura del material, confirmando la acertada construcción de esta invención histórica

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Brucellosis Vaccines: Assessment of Brucella melitensis Lipopolysaccharide Rough Mutants Defective in Core and O-Polysaccharide Synthesis and Export

Background: The brucellae are facultative intracellular bacteria that cause brucellosis, one of the major neglected zoonoses. In endemic areas, vaccination is the only effective way to control this disease. Brucella melitensis Rev 1 is a vaccine effective against the brucellosis of sheep and goat caused by B. melitensis, the commonest source of human infection. However, Rev 1 carries a smooth lipopolysaccharide with an O-polysaccharide that elicits antibodies interfering in serodiagnosis, a major problem in eradication campaigns. Because of this, rough Brucella mutants lacking the O-polysaccharide have been proposed as vaccines. Methodology/Principal Findings: To examine the possibilities of rough vaccines, we screened B. melitensis for lipopolysaccharide genes and obtained mutants representing all main rough phenotypes with regard to core oligosaccharide and O-polysaccharide synthesis and export. Using the mouse model, mutants were classified into four attenuation patterns according to their multiplication and persistence in spleens at different doses. In macrophages, mutants belonging to three of these attenuation patterns reached the Brucella characteristic intracellular niche and multiplied intracellularly, suggesting that they could be suitable vaccine candidates. Virulence patterns, intracellular behavior and lipopolysaccharide defects roughly correlated with the degree of protection afforded by the mutants upon intraperitoneal vaccination of mice. However, when vaccination was applied by the subcutaneous route, only two mutants matched the protection obtained with Rev 1 albeit at doses one thousand fold higher than this reference vaccine. These mutants, which were blocked in O-polysaccharide export and accumulated internal O-polysaccharides, stimulated weak anti-smooth lipopolysaccharide antibodies. Conclusions/Significance: The results demonstrate that no rough mutant is equal to Rev 1 in laboratory models and question the notion that rough vaccines are suitable for the control of brucellosis in endemic areas.This work was funded by the European Commission (Research Contract QLK2-CT-2002-00918) and the Ministerio de Ciencia y Tecnología of Spain (Proyecto AGL2004-01162/GAN)

Studies of new Higgs boson interactions through nonresonant HH production in the b¯bγγ fnal state in pp collisions at √s = 13 TeV with the ATLAS detector

A search for nonresonant Higgs boson pair production in the b ¯bγγ fnal state is performed using 140 fb−1 of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. This analysis supersedes and expands upon the previous nonresonant ATLAS results in this fnal state based on the same data sample. The analysis strategy is optimised to probe anomalous values not only of the Higgs (H) boson self-coupling modifer κλ but also of the quartic HHV V (V = W, Z) coupling modifer κ2V . No signifcant excess above the expected background from Standard Model processes is observed. An observed upper limit µHH < 4.0 is set at 95% confdence level on the Higgs boson pair production cross-section normalised to its Standard Model prediction. The 95% confdence intervals for the coupling modifers are −1.4 < κλ < 6.9 and −0.5 < κ2V < 2.7, assuming all other Higgs boson couplings except the one under study are fxed to the Standard Model predictions. The results are interpreted in the Standard Model efective feld theory and Higgs efective feld theory frameworks in terms of constraints on the couplings of anomalous Higgs boson (self-)interactions