472 research outputs found

    Book reviews

    Get PDF
    Click on the link to view

    Structural optimisation of random discontinuous fibre composites: Part 1 – Methodology

    Get PDF
    This paper presents a finite element model to optimise the fibre architecture of components manufactured from discontinuous fibre composites. An optimality criterion method has been developed to maximise global component stiffness, by determining optimum distributions for local section thickness and preform areal mass. The model is demonstrated by optimising the bending performance of a flat plate with three holes. Results are presented from a sensitivity study to highlight the level of compromise in stiffness optimisation caused by manufacturing constraints associated with the fibre deposition method, such as the scale of component features relative to the fibre length

    Flow characteristics of carbon fibre moulding compounds

    Get PDF
    This paper presents the development of a low-cost carbon fibre moulding compound using an automated spray deposition process. Directed Fibre Compounding (DFC) is used to produce charge packs directly from low cost carbon fibre tows and liquid epoxy resin. A range of material and process related parameters have been studied to understand their influence on the level of macroscopic charge flow, in an attempt to produce a carbon fibre moulding compound with similar flow characteristics to conventional glass fibre SMCs. Charge packs covering just 40% of the mould can be effectively used to process DFC, without detrimentally affecting void content, fibre distribution and mechanical properties. Tensile stiffness and strength values of 36GPa and 320MPa are reported for isotropic materials (100% charge coverage), which increase to 46GPa and 408MPa with flow induced alignment (50% charge coverage) at 50% fibre volume fraction

    The application of optical coherence tomography to image subsurface tissue structure of Antarctic krill Euphausia superba

    Get PDF
    Many small open ocean animals, such as Antarctic krill, are an important part of marine ecosystems. To discover what will happen to animals such as krill in a changing ocean, experiments are run in aquaria where conditions can be controlled to simulate water characteristics predicted to occur in the future. The response of individual animals to changing water conditions can be hard to observe, and with current observation techniques it is very difficult to follow the progress of an individual animal through its life. Optical coherence tomography (OCT) is an optical imaging technique that allows images at high resolution to be obtained from depths up to a few millimeters inside biological specimens. It is compatible with in vivo imaging and can be used repeatedly on the same specimens. In this work, we show how OCT may be applied to post mortem krill samples and how important physiological data such as shell thickness and estimates of organ volume can be obtained. Using OCT we find an average value for the thickness of krill exoskeleton to be (30±4) µm along a 1 cm length of the animal body. We also show that the technique may be used to provide detailed imagery of the internal structure of a pleopod joint and provide an estimate for the heart volume of (0.73±0.03) mm3

    Design and construction of a thermophotovoltaic generator using turbine combustion gas

    Full text link
    This US Naval Academy project involves the development of a prototype thermophotovoltaic (TPV) generator that uses a General Electric T-58 helicopter gas turbine as the heat source. The goals of this project were to demonstrate the viability of using TPV and external combustion gases to generate electricity, and develop a system which could also be used for materials testing. The generator was modularly designed so that different materials could be tested at a later date. The combustion gas was tapped from the T-58`s combustor through one of the two igniter ports and extracted through a silicon carbide matrix ceramic composite tube into a similarly constructed ceramic composite radiant emitter. The ceramic radiant emitters is heated by the combustion gas via convection, and then serves the TPV generator by radiating the heat outwards where it can be absorbed by thermophotovoltaic cells and converted directly into electricity. The gas turbine and generator module are monitored by a data acquisition system that performs both data collection and control functions. This paper details the design of the TPV generator. It also gives results of initial tests with the gas turbine

    Structural optimisation of random discontinuous fibre composites: Part 2 - case study

    Get PDF
    This is the second paper in a two part series presenting the development of a stiffness optimisation algorithm to intelligently optimise the fibre architecture of discontinuous fibre composites. A Multi-Criteria Decision Making (MCDM) strategy is used to select parameters associated with the fibre architecture, to produce components that satisfy stiffness, cost and mass criteria. The model has been successfully demonstrated using an automotive spare wheel well geometry, which shows that a highly optimised discontinuous fibre composite solution can compete against a continuous fabric counterpart in terms of specific stiffness, whilst presenting an opportunity for significant cost reduction. This could potentially lead to the application of composite materials into new areas where cost has previously been prohibitive

    Control of Autophagosome Axonal Retrograde Flux by Presynaptic Activity Unveiled Using Botulinum Neurotoxin Type A

    Get PDF
    Botulinum neurotoxin type A (BoNT/A) is a highly potent neurotoxin that elicits flaccid paralysis by enzymatic cleavage of the exocytic machinery component SNAP25 in motor nerve terminals. However, recent evidence suggests that the neurotoxic activity of BoNT/A is not restricted to the periphery, but also reaches the CNS after retrograde axonal transport. Because BoNT/A is internalized in recycling synaptic vesicles, it is unclear which compartment facilitates this transport. Using live-cell confocal and single-molecule imaging of rat hippocampal neurons cultured in microfluidic devices, we show that the activity-dependent uptake of the binding domain of the BoNT/A heavy chain (BoNT/A-Hc) is followed by a delayed increase in retrograde axonal transport of BoNT/A-Hc carriers. Consistent with a role of presynaptic activity in initiating transport of the active toxin, activity-dependent uptake of BoNT/A in the terminal led to a significant increase in SNAP25 cleavage detected in the soma chamber compared with nonstimulated neurons. Surprisingly, most endocytosed BoNT/A-Hc was incorporated into LC3-positive autophagosomes generated in the nerve terminals, which then underwent retrograde transport to the cell soma, where they fused with lysosomes both in vitro and in vivo. Blocking autophagosome formation or acidification with wortmannin or bafilomycin A1, respectively, inhibited the activity-dependent retrograde trafficking of BoNT/A-Hc. Our data demonstrate that both the presynaptic formation of autophagosomes and the initiation of their retrograde trafficking are tightly regulated by presynaptic activity

    Minimal muscle damage after a marathon and no influence of beetroot juice on inflammation and recovery

    Get PDF
    This study examined whether beetroot juice (BTJ) would attenuate inflammation and muscle damage following a marathon. Using a double blind, independent group’s design, 34 runners (~16 previous marathons completed) consumed either BTJ or an isocaloric placebo (PLA) for 3 days following a marathon. Maximal isometric voluntary contractions (MIVC), countermovement jumps (CMJ), muscle soreness, serum cytokines, leucocytosis, creatine kinase (CK), high sensitivity C-reactive protein (hs-CRP) and aspartate aminotransferase (AST) were measured pre, post, and on the 2 days after the marathon. CMJ and MIVC were reduced after the marathon (P0.05). Muscle soreness was increased in the day after the marathon (BTJ; 45±48 vs. PLA; 46±39 mm) and had returned to baseline by day 2, irrespective of supplementation (P=0.694). Cytokines (Interleukin-6; IL-6, interleukin-8, tumour necrosis factor-α) were increased immediately post-marathon but apart from IL-6 had returned to baseline values by day 1 post. No interaction effects were evident for IL-6 (P=0.213). Leucocytes increased 1.7 fold after the race and remained elevated 2 days post, irrespective of supplement (P<0.0001). CK peaked at 1 day post marathon (BTJ: 965±967 & PLA: 1141±979 IU·L-1) and like AST and hs-CRP, was still elevated 2 days after the marathon (P<0.05); however, no group differences were present for these variables. Beetroot juice did not attenuate inflammation or reduce muscle damage following a marathon, possibly because most of these indices were not markedly different from baseline values in the days after the marathon

    Target-dependence of sensory neurons: An ultrastructural comparison of axotomised dorsal root ganglion neurons with allowed or denied reinnervation of peripheral targets

    Get PDF
    Evidence is emerging for a role of rough endoplasmic reticulum (RER) in the form of stress granules, the unfolded protein response and protein bodies in the response of neurons to injury and in neurodegenerative diseases. Here, we have studied the role of the peripheral target in regulating the RER and polyribosomes of Nissl bodies in axotomised adult cat dorsal root ganglion (DRG) neurons where axonal regeneration and peripheral target reinnervation was either allowed or denied. Retrograde labelling with horseradish peroxidise was used as an independent marker to enable selection of only those DRG neuronal cell bodies with axons in the injured intercostal nerves. Indications of polyribosomal dispersal were seen by 6 h following axotomy, and by 24 h the normal orderly arrangement of lamellae of RER in Nissl bodies had become disorganised. These ultrastructural changes preceded light microscopical chromatolysis by 1–3 d. The retrograde response was maximal 8–32 d after axotomy. Clusters of debris-laden satellite cells/macrophages were present at this time but no ultrastructural evidence of neuronal apoptosis or necrosis was seen and there were no differences in the initial retrograde response according to the type of injury. By 64 d following axotomy with reinnervation, approximately half the labelled DRG neurons showed restoration of the orderly arrangement of RER and polyribosomes in their Nissl bodies. This was not seen after axotomy with reinnervation denied. We propose that the target-dependent changes in Nissl body ultrastructure described here are part of a continuum that can modify neuronal protein synthesis directed towards growth, maintenance or death of the neuron. This represents a possible structural basis for mediating the varied effects of neurotrophic interactions.I. P. Johnson and T. A. Sear

    Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results
    corecore