156 research outputs found

    Atypical glandular cells in conventional cervical smears: Incidence and follow-up

    Get PDF
    BACKGROUND: Atypical glandular cells on cervical smears are often associated with clinically significant uterine lesions. The frequency and accuracy of AGC-NOS (i.e. atypical glandular cells, not otherwise specified) diagnoses, regardless of the gland cell type or the degree of suspicion, and their outcome were investigated. METHODS: From January 1, 1990 to December 31, 1999 a total of 261 patients had an AGC-NOS diagnosis made by conventional cervical Papanicolaou smear interpretation representing 0.05% of all Pap-smears analyzed at the national level. 191 (73.2%) patients had a subsequent histological examination, 8 samples were not representative by origin and were excluded. RESULTS: Out of 183 AGC-NOS diagnosed, 56.3% (103/183) were associated with tissue-proven precancerous and/or cancerous lesions, 44% being of endocervical and 56% of endometrial origin. 75% of all AGC-patients were asymptomatic. 66.7% (6/9) of the patients with subsequent invasive endocervical adenocarcinoma (AC) and 56% (28/50) of those patients with invasive endometrial AC were without clinical symptoms. 3 patients out of 9 with an invasive endocervical AC were 35 years of age or less. 10.1% and 12.3% of all 'new' tissue-proven invasive endocervical or endometrial AC respectively recorded by the national Morphologic Tumour Registry (MTR) were first identified by a cytological AGC-NOS diagnosis. CONCLUSION: Our findings emphasize the importance of the cytological AGC-category even in the absence of a precise origin or cell type specification. 56% of the AGC-diagnoses being associated with significant cancerous or precancerous conditions, a complete and careful evaluation is required

    Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

    Get PDF
    The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

    Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

    Get PDF
    The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

    Measurement of the Top Pair Production Cross Section in the Dilepton Decay Channel in ppbar Collisions at sqrt s = 1.96 TeV

    Get PDF
    Submitted to Phys. Rev. DA measurement of the \ttbar production cross section in \ppbar collisions at s\sqrt{{\rm s}} = 1.96 TeV using events with two leptons, missing transverse energy, and jets is reported. The data were collected with the CDF II Detector. The result in a data sample corresponding to an integrated luminosity 2.8 fb1^{-1} is: \sigma_{\ttbar} = 6.27 ±\pm 0.73(stat) ±\pm 0.63(syst) ±\pm 0.39(lum) pb. for an assumed top mass of 175 GeV/c2c^{2}.A measurement of the tt̅ production cross section in pp̅ collisions at √s=1.96  TeV using events with two leptons, missing transverse energy, and jets is reported. The data were collected with the CDF II detector. The result in a data sample corresponding to an integrated luminosity 2.8  fb-1 is σtt̅ =6.27±0.73(stat)±0.63(syst)±0.39(lum)  pb. for an assumed top mass of 175  GeV/c2.Peer reviewe

    Measurement of the cross-section for b-jets produced in association with a Z boson at root s=7 TeV with the ATLAS detector ATLAS Collaboration

    Get PDF
    A measurement is presented of the inclusive cross-section for b-jet production in association with a Z boson in pp collisions at a centre-of-mass energy of root s = 7 TeV. The analysis uses the data sample collected by the ATLAS experiment in 2010, corresponding to an integrated luminosity of approximately 36 pb(-1). The event selection requires a Z boson decaying into high P-T electrons or muons, and at least one b-jet, identified by its displaced vertex, with transverse momentum p(T) > 25 GeV and rapidity vertical bar y vertical bar < 2.1. After subtraction of background processes, the yield is extracted from the vertex mass distribution of the candidate b-jets. The ratio of this cross-section to the inclusive Z cross-section (the average number of b-jets per Z event) is also measured. Both results are found to be in good agreement with perturbative QCD predictions at next-to-leading order

    Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s=7 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb(-1) of root s = 7 TeV proton-proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results. (C) 2012 CERN. Published by Elsevier B.V. All rights reserved

    Search for long-lived, heavy particles in final states with a muon and multi-track displaced vertex in proton–proton collisions at &#8730;<span style="text-decoration:overline">s</span>=7 TeV with the ATLAS detector

    Get PDF
    Many extensions of the Standard Model posit the existence of heavy particles with long lifetimes. In this Letter, results are presented of a search for events containing one or more such particles, which decay at a significant distance from their production point, using a final state containing charged hadrons and an associated muon. This analysis uses a data sample of proton–proton collisions at &#8730;s=7 TeV corresponding to an integrated luminosity of 4.4 fb−1 collected in 2011 by the ATLAS detector operating at the Large Hadron Collider. Results are interpreted in the context of R-parity violating supersymmetric scenarios. No events in the signal region are observed and limits are set on the production cross section for pair production of supersymmetric particles, multiplied by the square of the branching fraction for a neutralino to decay to charged hadrons and a muon, based on the scenario where both of the produced supersymmetric particles give rise to neutralinos that decay in this way. However, since the search strategy is based on triggering on and reconstructing the decay products of individual long-lived particles, irrespective of the rest of the event, these limits can easily be reinterpreted in scenarios with different numbers of long-lived particles per event. The limits are presented as a function of neutralino lifetime, and for a range of squark and neutralino masses

    Search for light top squark pair production in final states with leptons and b -jets with the ATLAS detector in s=7\sqrt{s}=7 TeV proton-proton collisions

    Get PDF
    The results of a search for pair production of light top squarks are presented, using 4.7 fb^-1 of sqrt(s) = 7 TeV proton-proton collisions collected with the ATLAS detector at the Large Hadron Collider. This search targets top squarks with masses similar to, or lighter than, the top quark mass. Final states containing exclusively one or two leptons (e, mu), large missing transverse momentum, light-jets and b-jets are used to reconstruct the top squark pair system. Global mass scale variables are used to separate the signal from a large ttbar background. No excess over the Standard Model expectations is found. The results are interpreted in the framework of the Minimal Supersymmetric Standard Model, assuming the top squark decays exclusively to a chargino and a b-quark. Light top squarks with masses between 123-167 GeV are excluded for neutralino masses around 55 GeV

    Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s=7 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb-1 of sqrt(s) = 7 TeV proton-proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

    The Development and Validation of the Empathy Components Questionnaire (ECQ)

    Get PDF
    Key research suggests that empathy is a multidimensional construct comprising of both cognitive and affective components. More recent theories and research suggest even further factors within these components of empathy, including the ability to empathize with others versus the drive towards empathizing with others. While numerous self-report measures have been developed to examine empathy, none of them currently index all of these wider components together. The aim of the present research was to develop and validate the Empathy Components Questionnaire (ECQ) to measure cognitive and affective components, as well as ability and drive components within each. Study one utilized items measuring cognitive and affective empathy taken from various established questionnaires to create an initial version of the ECQ. Principal component analysis (PCA) was used to examine the underlying components of empathy within the ECQ in a sample of 101 typical adults. Results revealed a five-component model consisting of cognitive ability, cognitive drive, affective ability, affective drive, and a fifth factor assessing affective reactivity. This five-component structure was then validated and confirmed using confirmatory factor analysis (CFA) in an independent sample of 211 typical adults. Results also showed that females scored higher than males overall on the ECQ, and on specific components, which is consistent with previous findings of a female advantage on self-reported empathy. Findings also showed certain components predicted scores on an independent measure of social behavior, which provided good convergent validity of the ECQ. Together, these findings validate the newly developed ECQ as a multidimensional measure of empathy more in-line with current theories of empathy. The ECQ provides a useful new tool for quick and easy measurement of empathy and its components for research with both healthy and clinical populations
    corecore